1. Debnath S, Reddy MM, Yi QS (2014) Environmental friendly cutting fluids and cooling techniques in machining: A review. J Clean Prod 83:33–47. https://doi.org/10.1016/j.jclepro.2014.07.071
2. Gajrani KK, Ram D, Ravi Sankar M (2017) Biodegradation and hard machining performance comparison of eco-friendly cutting fluid and mineral oil using flood cooling and minimum quantity cutting fluid techniques. J Clean Prod 165:1420–1435. https://doi.org/10.1016/j.jclepro.2017.07.217
3. Muralidhar V, Chaganti PK (2020) A review on testing methods of metalworking fluids for environmental health. Mater Today Proc. https://doi.org/10.1016/j.matpr.2020.02.514
4. Sankaranarayanan R, N. RJH, J. SK, Krolczyk GM (2021) A comprehensive review on research developments of vegetable-oil based cutting fluids for sustainable machining challenges. J Manuf Process 67:286–313. https://doi.org/10.1016/j.jmapro.2021.05.002
5. Pranav P, Sneha E, Rani S (2021) Vegetable oil-based cutting fluids and its behavioral characteristics in machining processes: a review. Ind Lubr Tribol. https://doi.org/10.1108/ILT-12-2020-0482
6. Sharma AK, Tiwari AK, Dixit AR (2016) Effects of Minimum Quantity Lubrication (MQL) in machining processes using conventional and nanofluid based cutting fluids: A comprehensive review. J Clean Prod 127:1–18. https://doi.org/10.1016/j.jclepro.2016.03.146
7. Silva LR, Corrêa ECS, Brandão JR, de Ávila RF (2020) Environmentally friendly manufacturing: Behavior analysis of minimum quantity of lubricant - MQL in grinding process. J Clean Prod 256: https://doi.org/10.1016/j.jclepro.2013.01.033
8. Gajrani KK, Suvin PS, Kailas SV, Sankar MR (2019) Hard machining performance of indigenously developed green cutting fluid using flood cooling and minimum quantity cutting fluid. J Clean Prod 206:108–123. https://doi.org/10.1016/j.jclepro.2018.09.178
9. Li K, Aghazadeh F, Hatipkarasulu S, Ray TG (2003) Health risks from exposure to metal-working fluids in machining and grinding operations. Int J Occup Saf Ergon 9:75–95. https://doi.org/10.1080/10803548.2003.11076555
10. Krolczyk GM, Maruda RW, Krolczyk JB, et al (2019) Ecological trends in machining as a key factor in sustainable production – A review. J Clean Prod 218:601–615. https://doi.org/10.1016/j.jclepro.2019.02.017
11. Pusavec F, Krajnik P, Kopac J (2010) Transitioning to sustainable production - Part I: application on machining technologies. J Clean Prod 18:174–184. https://doi.org/10.1016/j.jclepro.2009.08.010
12. Cheng C, Phipps D, Alkhaddar RM (2005) Treatment of spent metalworking fluids. Water Res 39:4051–4063. https://doi.org/10.1016/j.watres.2005.07.012
13. Lukoil (2013) Global trends in oil & gas markets to 2025. Lukoil 1–59
14. Wickramasinghe KC, Sasahara H, Rahim EA, Perera GIP (2020) Green Metalworking Fluids for sustainable machining applications: A review. J Clean Prod 257:120552. https://doi.org/10.1016/j.jclepro.2020.120552
15. Talib N, Rahim EA (2018) Performance of modified jatropha oil in combination with hexagonal boron nitride particles as a bio-based lubricant for green machining. Tribol Int 118:89–104. https://doi.org/10.1016/j.triboint.2017.09.016
16. Şirin Ş, Kıvak T (2019) Performances of different eco-friendly nanofluid lubricants in the milling of Inconel X-750 superalloy. Tribol Int 137:180–192. https://doi.org/10.1016/j.triboint.2019.04.042
17. Lawal SA, Choudhury IA, Nukman Y (2013) A critical assessment of lubrication techniques in machining processes: A case for minimum quantity lubrication using vegetable oil-based lubricant. J Clean Prod 41:210–221. https://doi.org/10.1016/j.jclepro.2012.10.016
18. Pereira O, Martín-Alfonso JE, Rodríguez A, et al (2017) Sustainability analysis of lubricant oils for minimum quantity lubrication based on their tribo-rheological performance. J Clean Prod 164:1419–1429. https://doi.org/10.1016/j.jclepro.2017.07.078
19. Rapeti P, Pasam VK, Rao Gurram KM, Revuru RS (2018) Performance evaluation of vegetable oil based nano cutting fluids in machining using grey relational analysis-A step towards sustainable manufacturing. J Clean Prod 172:2862–2875. https://doi.org/10.1016/j.jclepro.2017.11.127
20. Lawal SA, Choudhury IA, Nukman Y (2014) Evaluation of vegetable and mineral oil-in-water emulsion cutting fluids in turning AISI 4340 steel with coated carbide tools. J Clean Prod 66:610–618. https://doi.org/10.1016/j.jclepro.2013.11.066
21. Jia D, Li C, Zhang Y, et al (2017) Specific energy and surface roughness of minimum quantity lubrication grinding Ni-based alloy with mixed vegetable oil-based nanofluids. Precis Eng 50:248–262. https://doi.org/10.1016/j.precisioneng.2017.05.012
22. Guo S, Li C, Zhang Y, et al (2018) Analysis of volume ratio of castor/soybean oil mixture on minimum quantity lubrication grinding performance and microstructure evaluation by fractal dimension. Ind Crops Prod 111:494–505. https://doi.org/10.1016/j.indcrop.2017.11.024
23. Silva LR da, Alves D, Vieira F, Duarte FJ (2018) Study of 3D parameters and residual stress in grinding of AISI 4340 steel hardened using different cutting fluids. Int J Adv Manuf Technol 100:895–905. https://doi.org/doi.org/10.1007/s00170-018-2763-6
25. ASTM D974-14 (2010) Standard Test Method for Acid and Base Number by Color-Indicator Titration. Annu B ASTM Stand 1–7. https://doi.org/10.1520/D0974-08.2
26. ASTM 1298-12b (2008) Standard Practice for Density, Relative Density (Specific Gravity), or API Gravity of Crude Petroleum and Liquid Petroleum Products by Hydrometer Method. Annu B ASTM Stand 1–8. https://doi.org/10.1520/mnl10866m
27. ASTM D2270-04 (2007) Standard Practice for Calculating Viscosity Index from Kinematic Viscosity at 40 and 100 °C, Liquid Petroleum Products and Opaque Liquids (and the Calculation of Dynamic Viscosity ). ASTM Int 91:1–6. https://doi.org/10.1520/D2270-10E01
28. Navarra G, Cannas M, D’Amico M, et al (2011) Thermal oxidative process in extra-virgin olive oils studied by FTIR, rheology and time-resolved luminescence. Food Chem 126:1226–1231. https://doi.org/10.1016/j.foodchem.2010.12.010
29. Sharma BK, Doll KM, Heise GL, et al (2012) Antiwear additive derived from soybean oil and boron utilized in a gear oil formulation. Ind Eng Chem Res 51:11941–11945. https://doi.org/10.1021/ie301519r
30. de la Mata P, Dominguez-Vidal A, Bosque-Sendra JM, et al (2012) Olive oil assessment in edible oil blends by means of ATR-FTIR and chemometrics. Food Control 23:449–455. https://doi.org/10.1016/j.foodcont.2011.08.013
31. Gardette JL, Baba M (2013) FTIR and DSC studies of the thermal and photochemical stability of Balanites aegyptiaca oil (Toogga oil). Chem Phys Lipids 170–171:1–7. https://doi.org/10.1016/j.chemphyslip.2013.02.008
32. Guillén MD, Cabo N (2002) Fourier transform infrared spectra data versus peroxide and anisidine values to determine oxidative stability of edible oils. Food Chem 77:503–510. https://doi.org/10.1016/S0308-8146(01)00371-5
33. Sherazi STH, Talpur MY, Mahesar SA, et al (2009) Main fatty acid classes in vegetable oils by SB-ATR-Fourier transform infrared (FTIR) spectroscopy. Talanta 80:600–606. https://doi.org/10.1016/j.talanta.2009.07.030
34. Eychenne V, Mouloungui Z, Gaset A (1998) Thermal behavior of neopentylpolyol esters. Thermochim Acta 320:201–208. https://doi.org/10.1016/s0040-6031(98)00466-3
35. Ji H, Wang B, Zhang X, Tan T (2015) Synthesis of levulinic acid-based polyol ester and its influence on tribological behavior as a potential lubricant. RSC Adv 5:100443–100451. https://doi.org/10.1039/c5ra14366g
36. Kenda ES, N’Tsoukpoe KE, Ouédraogo IWK, et al (2017) Jatropha curcas crude oil as heat transfer fluid or thermal energy storage material for concentrating solar power plants. Energy Sustain Dev 40:59–67. https://doi.org/10.1016/j.esd.2017.07.003
37. Gouveia De Souza A, Oliveira Santos JC, Conceição MM, et al (2004) A thermoanalytic and kinetic study of sunflower oil. Brazilian J Chem Eng 21:265–273. https://doi.org/10.1590/s0104-66322004000200017
38. Cuvelier ME, Lacoste F, Courtois F (2012) Application of a DSC model for the evaluation of TPC in thermo-oxidized oils. Food Control 28:441–444. https://doi.org/10.1016/j.foodcont.2012.05.019
39. Tan CP, Che Man YB (2002) Recent developments in differential scanning calorimetry for assessing oxidative deterioration of vegetable oils. Trends Food Sci Technol 13:312–318. https://doi.org/10.1016/S0924-2244(02)00165-6
40. Drabik J, Trzos M (2013) Improvement of the resistance to oxidation of the ecological greases by the additives. J Therm Anal Calorim 113:357–363. https://doi.org/10.1007/s10973-013-3090-7
41. Ulkowski M, Musialik M, Litwinienko G (2005) Use of differential scanning calorimetry to study lipid oxidation. 1. Oxidative stability of lecithin and linolenic acid. J Agric Food Chem 53:9073–9077. https://doi.org/10.1021/jf051289c
42. Smith SA, King RE, Min DB (2007) Oxidative and thermal stabilities of genetically modified high oleic sunflower oil. Food Chem 102:1208–1213. https://doi.org/10.1016/j.foodchem.2006.06.058
43. Gloria H, Aguilera M (1998) Assessment of the Quality of Heated Oils by Differential Scanning Calorimetry. J Agric Food Chem 46:1363–1368
44. Márquez-Ruiz G, Garcés R, León-Camacho M, Mancha M (1999) Thermoxidative stability of triacylglycerols from mutant sunflower seeds. JAOCS, J Am Oil Chem Soc 76:1169–1174. https://doi.org/10.1007/s11746-999-0091-6
45. Santos JCO, Santos IMG, Souza AG (2005) Effect of heating and cooling on rheological parameters of edible vegetable oils. J Food Eng 67:401–405. https://doi.org/10.1016/j.jfoodeng.2004.05.007
46. Kowalski B, Gruczynska E, Maciaszek K (2000) Kinetics of rapeseed oil oxidation by pressure differential scanning calorimetry measurements. Eur J Lipid Sci Technol 102:337–341. https://doi.org/10.1002/(sici)1438-9312(200005)102:5<337::aid-ejlt337>3.3.co;2-v
47. Gajrani KK, Suvin PS, Kailas SV, Mamilla RS (2019) Thermal, rheological, wettability and hard machining performance of MoS2 and CaF2 based minimum quantity hybrid nano-green cutting fluids. J Mater Process Technol 266:125–139. https://doi.org/10.1016/j.jmatprotec.2018.10.036
48. Li B, Li C, Zhang Y, et al (2017) Effect of the physical properties of different vegetable oil-based nanofluids on MQLC grinding temperature of Ni-based alloy. Int J Adv Manuf Technol 89:3459–3474. https://doi.org/10.1007/s00170-016-9324-7
49. Zhang J, Li C, Zhang Y, et al (2018) Experimental assessment of an environmentally friendly grinding process using nanofluid minimum quantity lubrication with cryogenic air. J Clean Prod 193:236–248. https://doi.org/10.1016/j.jclepro.2018.05.009
50. Wang Y, Li C, Zhang Y, et al (2017) Experimental evaluation on tribological performance of the wheel/workpiece interface in minimum quantity lubrication grinding with different concentrations of Al2O3 nanofluids. J Clean Prod 142:3571–3583. https://doi.org/10.1016/j.jclepro.2016.10.110
51. Alves SM, Barros BS, Trajano MF, et al (2013) Tribological behavior of vegetable oil-based lubricants with nanoparticles of oxides in boundary lubrication conditions. Tribol Int 65:28–36. https://doi.org/10.1016/j.triboint.2013.03.027
52. Zhang Y, Li C, Jia D, et al (2015) Experimental evaluation of MoS2 nanoparticles in jet MQL grinding with different types of vegetable oil as base oil. J Clean Prod 87:930–940. https://doi.org/10.1016/j.jclepro.2014.10.027