[1] M.H. Sehhat, · Ali Mahdianikhotbesara, Powder spreading in laser-powder bed fusion process, 23 (2021) 89. https://doi.org/10.1007/s10035-021-01162-x.
[2] B. Behdani, M. Senter, L. Mason, M. Leu, J. Park, Numerical Study on the Temperature-Dependent Viscosity Effect on the Strand Shape in Extrusion-Based Additive Manufacturing, J. Manuf. Mater. Process. 4 (2020) 46. https://doi.org/10.3390/jmmp4020046.
[3] E.A. Alisaraei, R. Hashemi, D. Rahmatabadi, C. Sommitsch, Experimental study of forming limit diagram and mechanical properties of aluminum foils processed by the accumulative roll bonding, Mater. Res. Express. 7 (2020). https://doi.org/10.1088/2053-1591/abced9.
[4] D. Rahmatabadi, R. Hashemi, Experimental evaluation of forming limit diagram and mechanical properties of nano/ultra-fine grained aluminum strips fabricated by accumulative roll bonding, Int. J. Mater. Res. 108 (2017) 1036–1044. https://doi.org/10.3139/146.111566.
[5] N. Najafizadeh, M. Rajabi, R. Hashemi, S. Amini, A method and apparatus for determination of the ultrasonic-assisted forming limit diagram, Proc. Inst. Mech. Eng. Part C J. Mech. Eng. Sci. (2021) 095440622110115. https://doi.org/10.1177/09544062211011509.
[6] N. Najafizadeh, M. Rajabi, R. Hashemi, S. Amini, Improved microstructure and mechanical properties of sheet metals in ultrasonic vibration enhanced biaxial stretch forming, 5 (2019) 1–10. https://doi.org/10.22064/tava.2019.102421.1124.
[7] N. Najafizadeh, M. Rajabi, R. Hashemi, S. Amini, Studying the Effects of Ultrasonic Vibration on Microstructure and Hardness of St14 Steel Sheet, 2018.
[8] D. Rahmatabadi, M. Tayyebi, N. Najafizadeh, R. Hashemi, M. Rajabi, The influence of post-annealing and ultrasonic vibration on the formability of multilayered Al5052/MgAZ31B composite, Mater. Sci. Technol. (2021) 1–8. https://doi.org/10.1080/02670836.2020.1867784.
[9] D. Rahmatabadi, R. Hashemi, M. Tayyebi, A. Bayati, Investigation of mechanical properties, formability, and anisotropy of dual phase Mg-7Li-1Zn, Mater. Res. Express. 6 (2019). https://doi.org/10.1088/2053-1591/ab2de6.
[10] Perforated Metal | Custom Perforated Metal | Metalex, (n.d.). https://metlx.com/products/perforated-metal/ (accessed January 8, 2021).
[11] F.K. Chen, Analysis of plastic deformation for sheet metals with circular perforations, J. Mater. Process. Tech. 37 (1993) 175–188. https://doi.org/10.1016/0924-0136(93)90089-O.
[12] S.C. Baik, K.H. Oh, D.N. Lee, Forming limit diagram of perforated sheet, Scr. Metall. Mater. 33 (1995) 1201–1207. https://doi.org/10.1016/0956-716X(95)00349-Z.
[13] Y.-C. Lee, F.-K. Chen, Yield criterion for a perforated sheet with a uniform triangular pattern of round holes and a low ligament ratio, n.d.
[14] ISO - ISO 12004-2:2008 - Metallic materials — Sheet and strip — Determination of forming-limit curves — Part 2: Determination of forming-limit curves in the laboratory, (n.d.). https://www.iso.org/standard/43621.html (accessed March 31, 2021).
[15] A. Mahdianikhotbesara, M.H. Sehhat, M. Hadad, Experimental Study on Micro-Friction Stir Welding of Dissimilar Butt Joints Between Al 1050 and Pure Copper, Metallogr. Microstruct. Anal. 2021. (2021) 1–16. https://doi.org/10.1007/S13632-021-00771-5.
[16] M. Soltaninejad, M. Soltaninejad, F.S. K, M.K. Moshizi, V. Sadeghi, P. Jahanbakhsh, Environmental-friendly mortar produced with treated and untreated coal wastes as cement replacement materials, Clean Technol. Environ. Policy 2021. 1 (2021) 1–18. https://doi.org/10.1007/S10098-021-02204-X.
[17] C.H. Hung, W.T. Chen, M.H. Sehhat, M.C. Leu, The effect of laser welding modes on mechanical properties and microstructure of 304L stainless steel parts fabricated by laser-foil-printing additive manufacturing, Int. J. Adv. Manuf. Technol. (2020) 1–11. https://doi.org/10.1007/s00170-020-06402-7.
[18] A.P. Jirandehi, T.N. Chakherlou, A fatigue crack initiation and growth life estimation method in single-bolted connections, J. Strain Anal. Eng. Des. 54 (2019) 79–94. https://doi.org/10.1177/0309324719829274.
[19] H. Ghadimi, A.P. Jirandehi, S. Nemati, S. Guo, Small-sized specimen design with the provision for high-frequency bending-fatigue testing, Fatigue Fract. Eng. Mater. Struct. (2021). https://doi.org/10.1111/FFE.13589.
[20] Fractography: observing, measuring and interpreting fracture structure topography, n.d.