1. Christensen GJ. Choosing an all-ceramic restorative material: porcelain-fused-to-metal
or zirconia-based? J Am Dent Assoc. 2007;138:662-65.
2. Kelly JR, Nishimura I, Campbell SD. Ceramics in dentistry: historical roots and
current perspectives. J Prosthet Dent. 1996;75:18-32.
3. Anusavice KJ, Shen C, Rawls HR. Dental Ceramics. In: Anusavice KJ, Shen C, Rawls
HR, editors. Phillips' science of dental materials, USA: Saunders Company; 2013. p.
418-74.
4. Wiskott HW, Nicholls JI, Belser UC. Stress fatigue: basic principles and prosthodontic
implications. Int J Prosthodont. 1995;8:105-16.
5. Stawarczyk B, Özcan M, Schmutz F, Trottmann A, Roos M, Hämmerle CH. Two-body wear
of monolithic, veneered and glazed zirconia and their corresponding enamel antagonists.
Acta Odontol Scand. 2013;71:102-12.
6. Piconi C, Maccauro G. Zirconia as a ceramic biomaterial. Biomaterials 1999;20:1-25.
7. Tinschert J, Natt G, Mautsch W, Augthun M, Spiekermann H. Fracture resistance of
lithium disilicate-, alumina-, and zirconia-based three-unit fixed partial dentures:
a laboratory study. Int J Prosthodont. 2001;14:231-8.
8. Ernst CP, Cohnen U, Stender E, Willershausen B. In vitro retentive strength of
zirconium oxide ceramic crowns using different luting agents. J Prosthet Dent. 2005;93:551-8.
9. Kwon MS, Oh SY, Cho SA. Two-body wear comparison of zirconia crown, gold crown,
and enamel against zirconia. J Mech Behav Biomed Mater. 2015;47:21-8.
10. Rabinowicz E, Tanner R. Friction and wear of materials. J Appl Mech. 1966;33:479.
11. Oyafuso DK, Özcan M, Bottino MA, Itinoche MK. Influence of thermal and mechanical
cycling on the flexural strength of ceramics with titanium or gold alloy frameworks.
Dent Mater. 2008;24:351-6.
12. Stawarczyk B, Frevert K, Ender A, Roos M, Sener B, Wimmer T. Comparison of four
monolithic zirconia materials with conventional ones: Contrast ratio, grain size,
four-point flexural strength and two-body wear. J Mech Behav Biomed Mater. 2016;59:128-38.
13. Sundh A, Sjogren G. Fracture resistance of all-ceramic zirconia bridges with differing
phase stabilizers and quality of sintering. Dent Mater. 2006;22:778-84.
14. Guess PC, Schultheis S, Bonfante EA, Coelho PG, Ferencz JL, Silva NR. All-ceramic
systems: laboratory and clinical performance. Dent Clin North Am. 2011;55:333-52,
ix.
15. Giordano R, McLaren EA. Ceramics overview: classification by microstructure and
processing methods. Compend Contin Educ Dent. 2010;31(9):682-4.
16. Pandoleon P, Kontonasaki E, Kantiranis N, Pliatsikas N, Patsalas P, Papadopoulou
L, et al. Aging of 3Y-TZP dental zirconia and yttrium depletion. Dent Mater. 2017;33:e385-e92.
17. Zhang Y, Kim J-W. Graded structures for damage resistant and aesthetic all-ceramic
restorations. Dent Mater. 2009;25:781-90.
18. Kohorst P, Borchers L, Strempel J, Stiesch M, Hassel T, Bach FW, et al. Low-temperature
degradation of different zirconia ceramics for dental applications. Acta Biomater.
2012;8:1213-20.
19. Kim JW, Covel N, Guess P, Rekow E, Zhang Y. Concerns of hydrothermal degradation
in CAD/CAM zirconia. J Dent Res. 2010;89:91-5.
20. Lange F, Dunlop G, Davis BI. Degradation during aging of transformation‐toughened
ZrO2‐Y2O3 materials at 250°C. J Am Ceram Soc. 1986;69:237-40.
21. Lee JY, Jang GW, Park II, Heo YR, Son MK. The effects of surface grinding and
polishing on the phase transformation and flexural strength of zirconia. J Adv Prosthodont.
2019;11:1-6.
22. Yang SW, Kim JE, Shin Y, Shim JS, Kim JH. Enamel wear and aging of translucent
zirconias: In vitro and clinical studies. J Prosthet Dent. 2019;121:417-25.
23. Hobo S, Shillingburg HT, Jr. Porcelain fused to metal: tooth preparation and coping
design. J Prosthet Dent. 1973;30:28-36.
24. Beuer F, Stimmelmayr M, Gueth JF, Edelhoff D, Naumann M. In vitro performance
of full-contour zirconia single crowns. Dent Mater. 2012;28:449-56.
25. Gale M, Darvell B. Thermal cycling procedures for laboratory testing of dental
restorations. J Dent. 1999;27:89-99.
26. Lai X, Si W, Jiang D, Sun T, Shao L, Deng B. Effects of small-grit grinding and
glazing on mechanical behaviors and ageing resistance of a super-translucent dental
zirconia. J Dent. 2017;66:23-31.
27. Wongkamhaeng K, Dawson DV, Holloway JA, Denry I. Effect of Surface Modification
on In‐Depth Transformations and Flexural Strength of Zirconia Ceramics. J Prosthodont.
2019;28:e364-e75.
28. Flinn BD, Raigrodski AJ, Mancl LA, Toivola R, Kuykendall T. Influence of aging
on flexural strength of translucent zirconia for monolithic restorations. J Prosthet
Dent. 2017;117:303-9.
29. Sarıkaya I, Hayran Y. Effects of dynamic aging on the wear and fracture strength
of monolithic zirconia restorations. BMC Oral Health. 2018;18(1):146.
30. Flinn BD, Mancl LA, Raigrodski AJ. Accelerated aging characteristics of three
yttria-stabilized tetragonal zirconia polycrystalline dental materials. J Prosthet
Dent. 2012;108:223-30.
31. Alghazzawi TF, Lemons J, Liu PR, Essig ME, Bartolucci AA, Janowski GM. Influence
of low‐temperature environmental exposure on the mechanical properties and structural
stability of dental zirconia. J Prosthodont. 2012;21:363-9.
32. Alghazzawi TF, Janowski GM. Correlation of flexural strength of coupons versus
strength of crowns fabricated with different zirconia materials with and without aging.
The J Am Dent Assoc. 2015;146:904-12. e1.
33. Mota YA, Cotes C, Carvalho RF, Machado JP, Leite FP, Souza RO, et al. Monoclinic
phase transformation and mechanical durability of zirconia ceramic after fatigue and
autoclave aging. J Biomed Mater Res B Appl Biomater. 2017;105:1972-7.
34. Ghazy MH, Abo Madina MM, Aboushelib MN. Influence of fabrication techniques and
artificial aging on the fracture resistance of different cantilever zirconia fixed
dental prostheses. J Adhes Dent. 2012;14:161.
35. Renjo MM, Ćurković L, Štefančić S, Ćorić D. Indentation size effect of Y-TZP dental
ceramics. Dent Mater. 2014;30:e371-e6.
36. Dikicier S, Ayyildiz S, Ozen J, Sipahi C. Influence of core thickness and artificial
aging on the biaxial flexural strength of different all-ceramic materials: An in-vitro
study. Dent Mater. J 2017;36:296-302.
37. Pereira G, Venturini A, Silvestri T, Dapieve K, Montagner A, Soares F, et al.
Low-temperature degradation of Y-TZP ceramics: a systematic review and meta-analysis.
J Mech Behav Biomed Mater. 2016;55:151-63.
38. Chevalier J, Gremillard L, Virkar AV, Clarke DR. The tetragonal‐monoclinic transformation
in zirconia: lessons learned and future trends. J Am Ceram Soc. 2009;92:1901-20.
39. Cotes C, Arata A, Melo RM, Bottino MA, Machado JP, Souza RO. Effects of aging
procedures on the topographic surface, structural stability, and mechanical strength
of a ZrO2-based dental ceramic. Dent Mater. 2014;30:e396-404.
40. Lameira DP, De Souza GM. Fracture strength of aged monolithic and bilayer zirconia-based
crowns. Biomed Res Int. 2015;2015:418641.