1. Honarpisheh, M., M.J. Abdolhoseini, and S. Amini, Experimental and numerical investigation of the hot incremental forming of Ti-6Al-4V sheet using electrical current. The International Journal of Advanced Manufacturing Technology, 2015. 83(9-12): p. 2027-2037. DOI: 10.1007/s00170-015-7717-7.
2. Göttmann, A., et al., A novel approach for temperature control in ISF supported by laser and resistance heating. The International Journal of Advanced Manufacturing Technology, 2012. 67(9-12): p. 2195-2205. DOI: 10.1007/s00170-012-4640-z.
3. Ambrogio, G., et al., Induction heating and cryogenic cooling in single point incremental forming of Ti-6Al-4V: process setup and evolution of microstructure and mechanical properties. The International Journal of Advanced Manufacturing Technology, 2016. 91(1-4): p. 803-812. DOI: 10.1007/s00170-016-9794-7.
4. Ambrogio, G., L. Filice, and F. Gagliardi, Formability of lightweight alloys by hot incremental sheet forming. Materials & Design, 2012. 34: p. 501-508. DOI: 10.1016/j.matdes.2011.08.024.
5. Najafabady, S.A. and A. Ghaei, An experimental study on dimensional accuracy, surface quality, and hardness of Ti-6Al-4 V titanium alloy sheet in hot incremental forming. The International Journal of Advanced Manufacturing Technology, 2016. 87(9-12): p. 3579-3588. DOI: 10.1007/s00170-016-8712-3.
6. Liu, R., et al., Development of novel tools for electricity-assisted incremental sheet forming of titanium alloy. The International Journal of Advanced Manufacturing Technology, 2016. 85(5): p. 1137-1144. DOI: 10.1007/s00170-015-8011-4.
7. Ambrogio, G., et al., Induction heating and cryogenic cooling in single point incremental forming of Ti-6Al-4V: process setup and evolution of microstructure and mechanical properties. The International Journal of Advanced Manufacturing Technology, 2017. 91(1): p. 803-812. DOI: 10.1007/s00170-016-9794-7.
8. Ortiz, M., et al., Accuracy and Surface Quality Improvements in the Manufacturing of Ti-6Al-4V Parts Using Hot Single Point Incremental Forming. Metals, 2019. 9(6): p. 697.
9. Hussain, G., et al., Tool and lubrication for negative incremental forming of a commercially pure titanium sheet. Journal of Materials Processing Technology, 2008. 203(1-3): p. 193-201. DOI: 10.1016/j.jmatprotec.2007.10.043.
10. Azevedo, N., et al., Lubrication Aspects during Single Point Incremental Forming for Steel and Aluminum Materials. International Journal of Precision Engineering and Manufacturing, 2015. 16: p. 1-7. DOI: 10.1007/s12541-015-0079-0.
11. Diabb, J., et al., Study of lubrication and wear in single point incremental sheet forming (SPIF) process using vegetable oil nanolubricants. Wear, 2017. 376-377: p. 777-785. DOI: https://doi.org/10.1016/j.wear.2017.01.045.
12. Fan, G., et al., Electric hot incremental forming of Ti-6Al-4V titanium sheet. The International Journal of Advanced Manufacturing Technology, 2009. 49(9-12): p. 941-947. DOI: 10.1007/s00170-009-2472-2.
13. Song, X., et al., Numerical and experimental investigation on the deformation mechanism of micro single point incremental forming process. Journal of Manufacturing Processes, 2018. 36: p. 248-254. DOI: https://doi.org/10.1016/j.jmapro.2018.10.035.
14. Yoganjaneyulu, G., C. Sathiya Narayanan, and R. Narayanasamy, Investigation on the fracture behavior of titanium grade 2 sheets by using the single point incremental forming process. Journal of Manufacturing Processes, 2018. 35: p. 197-204. DOI: https://doi.org/10.1016/j.jmapro.2018.07.024.
15. Bong, H.J., et al., Correlative Study on Plastic Response and Formability of Ti-6Al-4V Sheets under Hot Forming Conditions. Journal of Manufacturing Processes, 2020. 58: p. 775-786. DOI: https://doi.org/10.1016/j.jmapro.2020.08.053.
16. Iseki, H. and T. Naganawa, Vertical wall surface forming of rectangular shell using multistage incremental forming with spherical and cylindrical rollers. Journal of Materials Processing Technology, 2002. 130-131: p. 675-679. DOI: 10.1016/s0924-0136(02)00735-5.
17. Press, W.H. and S.A. Teukolsky, Savitzky‐Golay Smoothing Filters. Computers in Physics, 1990. 4(6): p. 669-672. DOI: 10.1063/1.4822961.
18. Al-Obaidi, A., V. Kräusel, and D. Landgrebe, Hot single-point incremental forming assisted by induction heating. Vol. 82. 2015.
19. Ao, D., et al., Formability and deformation mechanism of Ti-6Al-4V sheet under electropulsing assisted incremental forming. International Journal of Solids and Structures, 2020. 202: p. 357-367. DOI: https://doi.org/10.1016/j.ijsolstr.2020.06.028.
20. Ortiz, M., et al., Accuracy and Surface Quality Improvements in the Manufacturing of Ti-6Al-4V Parts Using Hot Single Point Incremental Forming. Metals - Open Access Metallurgy Journal, 2019. 9: p. 697. DOI: 10.3390/met9060697.
21. Cao, T., et al., An efficient method for thickness prediction in multi-pass incremental sheet forming. International Journal of Advanced Manufacturing Technology, 2015. 77(1-4): p. 469-483. DOI: 10.1007/s00170-014-6489-9.
22. Hussain, G. and L. Gao, A novel method to test the thinning limits of sheet metals in negative incremental forming. International Journal of Machine Tools and Manufacture, 2007. 47(3): p. 419-435. DOI: https://doi.org/10.1016/j.ijmachtools.2006.06.015.
23. Lu, B., et al., Investigation of material deformation mechanism in double side incremental sheet forming. International Journal of Machine Tools and Manufacture, 2015. 93: p. 37-48. DOI: 10.1016/j.ijmachtools.2015.03.007.
24. Tolipov, A., et al., Multipoint forming using mesh-type elastic cushion: modelling and experimentation. The International Journal of Advanced Manufacturing Technology, 2019. 103(5): p. 2079-2090. DOI: 10.1007/s00170-019-03635-z.
25. Vahdani, M., et al., Electric hot incremental sheet forming of Ti-6Al-4V titanium, AA6061 aluminum, and DC01 steel sheets. The International Journal of Advanced Manufacturing Technology, 2019. 103(1): p. 1199-1209. DOI: 10.1007/s00170-019-03624-2.
26. Wang, H.-d., Graphite Solid Lubrication Materials, in Encyclopedia of Tribology, Q.J. Wang and Y.-W. Chung, Editors. 2013, Springer US: Boston, MA. p. 1550-1555.
27. Careri, F., et al., The effect of the heat treatments on the tool wear of hybrid Additive Manufacturing of IN718. Wear, 2021. 470-471: p. 203617. DOI: https://doi.org/10.1016/j.wear.2021.203617.
28. Gatea, S., et al., Investigation of the effect of forming parameters in incremental sheet forming using a micromechanics based damage model. International Journal of Material Forming, 2018. 12(4): p. 553-574. DOI: 10.1007/s12289-018-1434-3.
29. Bai, M., et al., In-situ Ti-6Al-4V/TiC composites synthesized by reactive spark plasma sintering: processing, microstructure, and dry sliding wear behaviour. Wear, 2019. 432-433: p. 202944. DOI: https://doi.org/10.1016/j.wear.2019.202944.
30. Wang, S., et al., Surface generation and materials removal mechanism in ultra-precision grinding of biconical optics based on slow tool servo with diamond grinding wheels. Journal of Manufacturing Processes, 2021. 72: p. 1-14. DOI: https://doi.org/10.1016/j.jmapro.2021.10.010.
31. Qu, S.J., et al., Microstructural evolution and high-temperature oxidation mechanisms of a titanium aluminide based alloy. Acta Materialia, 2018. 148: p. 300-310. DOI: 10.1016/j.actamat.2018.02.013.
32. Ding, R. and Z.X. Guo, Microstructural evolution of a Ti–6Al–4V alloy during β-phase processing: experimental and simulative investigations. Materials Science and Engineering: A, 2004. 365(1): p. 172-179. DOI: https://doi.org/10.1016/j.msea.2003.09.024.
33. Dai, J., et al., Characterization and correlation of microstructure and hardness of Ti–6Al–4V sheet surface-treated by pulsed laser. Journal of Alloys and Compounds, 2020. 826: p. 154243. DOI: 10.1016/j.jallcom.2020.154243.
34. Najafabady, S.A. and A. Ghaei, An experimental study on dimensional accuracy, surface quality, and hardness of Ti-6Al-4 V titanium alloy sheet in hot incremental forming. The International Journal of Advanced Manufacturing Technology, 2016. 87(9): p. 3579-3588. DOI: 10.1007/s00170-016-8712-3.
35. Sabat, R.K., et al., Mechanism of texture and microstructure evolution during warm rolling of Ti–6Al–4V alloy. Philosophical Magazine, 2018. 98(28): p. 2562-2581. DOI: 10.1080/14786435.2018.1493237.