[1] Wei Ren, Bin Zhang, Yulong Zhao, Kexuan Wang. Research Progress in Energy Conversion Components for MEMS Initiating Explosive Device[J]. Chinese Journal of Energetic Materials, 2017, 25(5):428-436.
[2] Satyajit Chowdhury, Igal Kronhaus. Characterization of Vacuum Arc Thruster Performance in Weak Magnetic Nozzle[J]. Aerospace, 2020,7(6):82;
[3] Rahman O, Tong S-F, Sheng Z-M. Enhancement of proton acceleration and conversion efficiency by double laser pulses plasma Physics of Plasmas. 2020; 27(3).
[4] Kye-Nam Lee M-IP, Sung-Ho Choi, Chong-Ook Park, Han S. Uhm. Characteristics of plasma generated by polysilicon semiconductor bridge (SCB)[J]. Sensors and Actuators A 2002; 96:252-7.
[5] Park M-I, Choo H-T, Yoon S-H, et al. Comparison of plasma generation behaviors between a single crystal semiconductor bridge (single-SCB) and a polysilicon semiconductor bridge (poly-SCB). Sensors and Actuators A: Physical. 2004; 115(1):104-8.
[6] Huget EF , Dvivedi N , Cosner HE. Properties of two nickel-chromium crown-and-bridge alloys for porcelain veneering[J]. Journal of the American Dental Association, 1997,94(1):87-90
[7] Yun Shen, Jianbing Xu, Chengai Wang, Tenglong Yang, Yinghua Ye, Ruiqi Shen. Ignition characteristics of energetic nichrome bridge initiator based on Al/CuO reactive multilayer films under capacitor discharge and constant current conditions[J]. Sensors and Actuators A: Physical, 2020, 313:112200
[8] Kyung-Hoon Min, Kyu-Chang Chun, Ki-Bum Kim. Comparative study of tantalum and tantalum nitrides (Ta2N and TaN) as a diffusion barrier for Cu metallization[J]. Journal of Vacuum Science & Technology B: Microelectronics and Nanometer Structures Processing, Measurement, and Phenomena, 1996, 14:3263
[9] S. Tsukimoto, M. Moriyama, Masanori Murakami. Microstructure of amorphous tantalum nitride thin films[J]. Thin Solid Films, 2004, 460: 222-226.
[10] Kyoung-Il Na, Se-Jong Park, Woo-Cheol Jeong, Se-Hoon Kim, Sung-Eun Boo, Nam-Jin Bae, Jung-Hee Lee. Deposition and characteristics of tantalum nitride films by plasma assisted atomic layer deposition as cu diffusion barrier[J]. Mat. Res. Soc. Symp. Proc., 2003, 766:E3.22.1-6.
[11] JiayangWu, Armando Rodrigo Mor, Paul V. M.van Nes, Johan J.Smit. Measuring method for partial discharges in a high voltage cable system. subjected to impulse and superimposed voltage under laboratory conditions[J]. International Journal of Electrical Power & Energy Systems, 2020, 115:105489.
[12] Carvalho P C D. An Analysis of the Initiation Process of Electro-explosive Devices.[J]. Journal of Aerospace Technology and Management, 2012,4(1):45-50 .
[13] Feng, Hongyan; Zhang, Lin; Zhu, Shunguan, Li Yan, Shen Ruiqi. Heat transfer to a single explosive particle injected into SCB plasma[J]. HEAT AND MASS TRANSFER, 2012, 48(4):585-590.
[14] Bao B, Yan N, Jiang Y, et al. Temperature measurements and multi-physical field simulations of micro-sized metal film bridge. Applied Thermal Engineering. 2016; 104:121-8.
[15] Qin Qiongyao ZX. Numerical investigation on combustion in muzzle flows using an inert gas labeling method. International Journal of Heat and Mass Transfer. 2016, 101:91.
[16] Chen J, Hua X, Zhang X. Two-dimensional numerical simulation of thermo-electric coupling model in semiconductor bridge ignition system. International Journal of Heat and Mass Transfer. 2017; 113:195-202.
[17] Pei-Yi Yu W-YS, Ren-Yu Yeh, Lin-Han Chiang Hsieh, Ray-Quan Hsu, Toru Sato. Direct numerical simulation of methane hydrate dissociation in pore-scale flow by using CFD method. International Journal of Heat and Mass Transfer. 2017, 113:176.
[18] Sen S, Lake M, Wilden J, et al. Synthesis and characterization of Ti/Al reactive multilayer films with various molar ratios. Thin Solid Films. 2017, 631:99-105.
[19] Sen S, Lake M, Schaaf P. Optimization of self-propagating reaction properties through Al-molar ratios in ternary Titanium-Silicon-Aluminum reactive multilayer films. Vacuum. 2018; 156:205-11.
[20] Grundmann, S., Tropea, C. Experimental transition delay using glow-discharge plasma actuators[J]. Experiments in Fluids volume, 2007, 42:653-657.