Abnisa, F., Daud, W. M. A. W., & Sahu, J. N. (2014). Pyrolysis of mixtures of palm shell and polystyrene: An optional method to produce a high-grade of pyrolysis oil. Environmental Progress and Sustainable Energy, 33(3), 1026–1033. https://doi.org/10.1002/ep.11850
Abnisa, F., Wan Daud, W. M. A., Ramalingam, S., Azemi, M. N. B. M., & Sahu, J. N. (2013). Co-pyrolysis of palm shell and polystyrene waste mixtures to synthesis liquid fuel. Fuel, 108, 311–318. https://doi.org/10.1016/j.fuel.2013.02.013
Alam, M., Bhavanam, A., Jana, A., Viroja, J. kumar S., & Peela, N. R. (2020). Co-pyrolysis of bamboo sawdust and plastic: Synergistic effects and kinetics. Renewable Energy, 149, 1133–1145. https://doi.org/10.1016/j.renene.2019.10.103
Banu, J. R., Sharmila, V. G., Ushani, U., Amudha, V., & Kumar, G. (2020). Impervious and influence in the liquid fuel production from municipal plastic waste through thermo-chemical biomass conversion technologies - A review. Science of the Total Environment, 718, 137287. https://doi.org/10.1016/j.scitotenv.2020.137287
Cardoen, D., Joshi, P., Diels, L., Sarma, P. M., & Pant, D. (2015). Agriculture biomass in India: Part 1. Estimation and characterization. Resources, Conservation and Recycling, 102, 39–48. https://doi.org/10.1016/j.resconrec.2015.06.003
Çepelioǧullar, Ö., & Pütün, A. E. (2013). Thermal and kinetic behaviors of biomass and plastic wastes in co-pyrolysis. Energy Conversion and Management, 75, 263–270. https://doi.org/10.1016/j.enconman.2013.06.036
Dewangan, A., Pradhan, D., & Singh, R. K. (2016). Co-pyrolysis of sugarcane bagasse and low-density polyethylene: Influence of plastic on pyrolysis product yield. Fuel, 185, 508–516. https://doi.org/10.1016/j.fuel.2016.08.011
Dupont, C., Chen, L., Cances, J., Commandre, J. M., Cuoci, A., Pierucci, S., & Ranzi, E. (2009). Biomass pyrolysis: Kinetic modelling and experimental validation under high temperature and flash heating rate conditions. Journal of Analytical and Applied Pyrolysis, 85(1–2), 260–267. https://doi.org/10.1016/j.jaap.2008.11.034
Durange, J. A. C., Santos, M. R. L., Pereira, M. M., Fernandes Jr., L. A. P., Souza, M. N., Mendes, A. N., Mesa, L. M., Sánchez, C. G., Sanchez, E. M. S., Pérez, J. M. M., & Carvalho, N. M. F. (2013). Physicochemical Properties of Pyrolysis Bio-Oil from Sugarcane Straw and Sugarcane in Natura. Journal of Biomaterials and Nanobiotechnology, 04(02), 10–19. https://doi.org/10.4236/jbnb.2013.42a002
Gouda, N., & Kumar, A. (2019). Biocatalysis and Agricultural Biotechnology Determination of kinetic and thermodynamic parameters of thermal degradation of different biomasses for pyrolysis. 21(March).
Hameed, Z., Aman, Z., Naqvi, S. R., Tariq, R., Ali, I., & Makki, A. A. (2018). Kinetic and Thermodynamic Analyses of Sugar Cane Bagasse and Sewage Sludge Co-pyrolysis Process. Energy and Fuels, 32(9), 9551–9558. https://doi.org/10.1021/acs.energyfuels.8b01972
Hassan, H., Hameed, B. H., & Lim, J. K. (2020). Co-pyrolysis of sugarcane bagasse and waste high-density polyethylene: Synergistic effect and product distributions. Energy, 191. https://doi.org/10.1016/j.energy.2019.116545
Kositkanawuth, K., Bhatt, A., Sattler, M., & Dennis, B. (2017). Renewable Energy from Waste: Investigation of Co-pyrolysis between Sargassum Macroalgae and Polystyrene. Energy and Fuels, 31(5), 5088–5096. https://doi.org/10.1021/acs.energyfuels.6b03397
Lopez, G., Artetxe, M., Amutio, M., Bilbao, J., & Olazar, M. (2017). Thermochemical routes for the valorization of waste polyole fi nic plastics to produce fuels and chemicals . A review. Renewable and Sustainable Energy Reviews, 73(November 2016), 346–368. https://doi.org/10.1016/j.rser.2017.01.142
Ng, Q. H., Chin, B. L. F., Yusup, S., Loy, A. C. M., & Chong, K. Y. Y. (2018). Modeling of the co-pyrolysis of rubber residual and HDPE waste using the distributed activation energy model (DAEM). Applied Thermal Engineering, 138, 336–345. https://doi.org/10.1016/j.applthermaleng.2018.04.069
Özsin, G., & Pütün, A. E. (2017). Insights into pyrolysis and co-pyrolysis of biomass and polystyrene: Thermochemical behaviors, kinetics and evolved gas analysis. Energy Conversion and Management, 149, 675–685. https://doi.org/10.1016/j.enconman.2017.07.059
Özsin, G., & Pütün, A. E. (2018). Co-pyrolytic behaviors of biomass and polystyrene: Kinetics, thermodynamics and evolved gas analysis. Korean Journal of Chemical Engineering, 35(2), 428–437. https://doi.org/10.1007/s11814-017-0308-6
Phanisankar, B. S. S., Vasudeva Rao, N., & Manikanta, J. E. (2020). Conversion of waste plastic to fuel products. Materials Today: Proceedings, xxxx. https://doi.org/10.1016/j.matpr.2020.02.880
Pradhan, D., Volli, V., Singh, R. K., & Murgun, S. (2020). Co-pyrolysis behavior , engine performance characteristics , and thermodynamics of liquid fuels from mahua seeds and waste thermocol : A comprehensive study. Chemical Engineering Journal, 393(March), 124749. https://doi.org/10.1016/j.cej.2020.124749
Reshad, A. S., Tiwari, P., & Goud, V. V. (2019). Thermal and co-pyrolysis of rubber seed cake with waste polystyrene for bio-oil production. Journal of Analytical and Applied Pyrolysis, 139(October 2018), 333–343. https://doi.org/10.1016/j.jaap.2019.03.010
Roy, P., & Dias, G. (2017). Prospects for pyrolysis technologies in the bioenergy sector: A review. Renewable and Sustainable Energy Reviews, 77(May 2016), 59–69. https://doi.org/10.1016/j.rser.2017.03.136
Sanahuja-Parejo, O., Veses, A., Navarro, M. V., López, J. M., Murillo, R., Callén, M. S., & García, T. (2019). Drop-in biofuels from the co-pyrolysis of grape seeds and polystyrene. Chemical Engineering Journal, 377(xxxx). https://doi.org/10.1016/j.cej.2018.10.183
Singh, R. K., Ruj, B., Sadhukhan, A. K., & Gupta, P. (2019). Impact of fast and slow pyrolysis on the degradation of mixed plastic waste : Product yield analysis and their characterization. Journal of the Energy Institute, February, 1–11. https://doi.org/10.1016/j.joei.2019.01.009
Suriapparao, D. V., Boruah, B., Raja, D., & Vinu, R. (2018). Microwave assisted co-pyrolysis of biomasses with polypropylene and polystyrene for high quality bio-oil production. Fuel Processing Technology, 175(November 2017), 64–75. https://doi.org/10.1016/j.fuproc.2018.02.019
Uttaravalli, A. N., Dinda, S., & Gidla, B. R. (2020). Scientific and engineering aspects of potential applications of post-consumer (waste) expanded polystyrene: A review. Process Safety and Environmental Protection, 137, 140–148. https://doi.org/10.1016/j.psep.2020.02.023
Uzoejinwa, B. B., He, X., Wang, S., El-Fatah Abomohra, A., Hu, Y., & Wang, Q. (2018). Co-pyrolysis of biomass and waste plastics as a thermochemical conversion technology for high-grade biofuel production: Recent progress and future directions elsewhere worldwide. In Energy Conversion and Management (Vol. 163, pp. 468–492). Elsevier Ltd. https://doi.org/10.1016/j.enconman.2018.02.004
Varshney, D., Mandade, P., & Shastri, Y. (2019). Multi-objective optimization of sugarcane bagasse utilization in an Indian sugar mill. 18, 96–114. https://doi.org/10.1016/j.spc.2018.11.009.