[1] Hou, Z., Cui, B., Liu, L., Liu, Q. : Effect of the different additives on the fabrication of porous kaolin-based mullite ceramics. Ceram. Int. 2016, 42, 17254–17258. https://doi.org/10.1016/j.ceramint.2016.08.020
[2] Abdullayev, A., Bekheet, M., Hanaor, D., Gurlo, A. : Materials and Applications for Low-Cost Ceramic Membranes. Membranes 2019, 9, 105. https://doi.org/10.3390/membranes9090105
[3] Belibi Belibi, P., Nguemtchouin, M., Rivallin, M., Ndi Nsami, J., Sieliechi, J., et al. : Microfiltration ceramic membranes from local Cameroonian clay applicable to water treatment. Ceramics International, Elsevier, 2015, 41 (2), pp.2752 - 2759. https://doi.org/10.1016/j.ceramint.2014.10.090
[4] Djangang, C.N., Elimbi, A., Melo, U.C., Lecomte, G.L., Nkoumbou, C., Soro, J., et al. : Sintering of clay-chamotte ceramic composites for refractory bricks. Applied Clay Science 2008; 39: 10–18. https://doi.org/10.1016/j.ceramint.2007.02.012
[5] Alima, M., Hadda, R., Sihem, B., Afef, A., Yasmina, T., Sabrina, L., et al.: Effect of chamotte on the structural and microstructural characteristics of mullite elaborated via reaction sintering of Algerian kaolin. J. mater Res.Technol 2019; 8(5):4010-4018. https://doi.org/10.1016/j.jmrt.2019.07.009
[6] Deutou, N.J.G., Beda, T., Biesuz, M., Boubakar, L., Melo, U.C, Kamseu, E., Sglavo, V.M.: Design and characterization of porous mullite based semi-vitrified ceramics. Ceramics International 2018.
https://doi.org/10.1016/j.ceramint.2018.01.232
[7] Lima., R.C.O., Lira, H.L., Neves, G.A., Silva, M.C., França, K.B.: Study of the influence of granite residue in different Compositions to prepare ceramic membranes. Materials Science Forum 2014; 798-799: pp 542-547. https://doi.org/10.4028/www.scientific.net/MSF.798-799.542
[8] Souza, A.E., Teixeira, S.R., Santos, G.T.A., Longo, E.: Addition of sedimentary rock to kaolinitic clays: influence on sintering process. Cerâmica 2013; 59: 147-155. https://doi.org/10.1590/S0366-69132013000100017
[9] Monash, P., Pugazhenthi, G.: Development of ceramic supports derived from low-cost raw materials for membrane applications and its optimization based on sintering temperature. Int.J. Appl. Ceram. Technol 2011; 8(1) : 227–238. https://doi.org/10.1111/j.1744-7402.2009.02443.x
[10] Kamseu, E., Bakop, T., Djangang, C., Melo, U.C., Hanuskova, M., Leonelli, C.: Porcelain stoneware with pegmatite and nepheline syenite solid solutions: pore size distribution and descriptive microstructure, J. Eur. Ceram. Soc 2013; 33 : 2775–2784. https://doi.org/10.1016/j.jeurceramsoc.2013.03.028
[11] Kolli, M., Hamidouche, M., Fantozzi, G., Chevalier, J. : Elaboration and characterization of a refractory based on Algerian kaolin, Ceram Int 2007; 33(8): 1435–1443.
https://doi.org/10.1016/j.ceramint.2006.06.009
[12] Kong, L.B., Chen, Y.Z., Zhang, T.S., Boey, J., Ma, F., Huang, H.: Effect of alkaline-earth oxides on phase formation and morphology development of mullite ceramics, Ceram. Int 2004; 30 : 1319-1323.
https://doi.org/10.1016/j.ceramint.2003.12.019
[13] Hajjaji, M., Kacim, S., Boulmane, M.: Mineralogy and firing characteristics of the clay from the valley of Ourika (Marocco). Applied Clay Science 2002. 21, p. 203-212. https://doi.org/10.1016/S0169-1317(01)00101-6
[14] Zhoua, H.M., Qiao, X.C., Yu, J.G. : Influences of quartz and muscovite on the formation of mullite from kaolinite. Applied Clay Sci. 2013. 80-81 : 176-181. https://doi.org/10.1016/j.clay.2013.04.004
[15] Ganesh, I., Ferreira, J.M.F.: Influence of raw material type and of the overall chemical composition on phase formation and sintered microstructure of mullite aggregates. Ceram Int. 2009; 35:2007–15.
https://doi.org/10.1016/j.ceramint.2008.11.008
[16] Comeforo, J.E., Fischer, R.B., Bradley, W.F. : Mullitization of kaolinite. J Am Ceram Soc. 1948;31(9):254–9. https://doi.org/10.1111/j.1151-2916.1948.tb14310.x
[17] Djangang, C.N., Tchamba, A.B., Kamseu, E., Melo, U.C., Elimbi, A., Ferrari, A.M., Leonelli, C. : Reaction sintering and microstructural evolution in metakaolin-metastable alumina composites. J Therm Anal Calorim. 2014;117(3):1035–45. https://doi.org/10.1007/s10973-014-3937-6
[18] Chakraborty, A.K. : Phase transformation of kaolinite clay. Berlin:Springer 2014. p. 339. https://doi.org/10.1007/978-81-322-1154-9
[19] Sainz, M.A., Serrano, F.J., Bastida, J., Caballero, A. : Microstructural evolution and growth of crystallite size of mullite during thermal decompostion of kyanite. J Eur Ceram Soc. 1997;17:1277–84. https://doi.org/10.1016/S0955-2219(96)00231-2
[20] Mazzucato, E., Artioli, G., Gualtieri, A.: High temperature dehydroxylation of muscovite-2M 1: a kinetic study by in situ XRPD. Phys Chem Minerals. 1999 ; 26 (5) : 375-381.
https://doi.org/10.1007/s002690050197
[21] Prodanovi, D., Ivkovi, B., Radosavljevi, S.: Kinetics of the dehydroxylation and mullitization process of the halloysite from the farbani potok locality, Serbia. Applied Clay Sci. 1997 ; 12: 267-274.
https://doi.org/10.1016/S0169-1317(97)00011-2
[22] Agbarakwe, U.B., Babda, J.S., Masser, P.J.: Non-uniformities and pores formation, Mater. Sci. Eng. 1989; 109: 9–16.https://doi.org/10.1016/0921-5093(89)90559-5
[23] Shui, A., Zeng, L., Uematsu, K.: Relationship between sintering shrinkage anisotropy and particle orientation for alumina powder compacts, Scripta Mater 2006; 55 (9) : 831–834.
https://doi.org/10.1016/j.scriptamat.2006.07.026
[24] Moon, I.H., Lee, J.K.: Relation between sinterability and initial packing density in loosely sintered copper sphere compacts, Powder Metall 1987; 30 (4): 249–254. https://doi.org/10.1179/pom.1987.30.4.249