Purpose
The present study is focused on designing an automated jet nebulizer that possesses the capability of dynamic flow regulation. In the case of existing equipment, a high fraction of the aerosol is lost to the atmosphere through the vent, during the exhalation phase of respiration. Specifically, 50% of the volume of aerosol generated, is wasted. Desired effects of nebulization may not achieve by neglecting this poor administration technique. There may be adverse effects like bronchospasm, and exposure to high drug concentrations.
Methods
The proposed nebulizer is composed of two modes as “Compressed Air” mode and “Oxygen Therapy” mode. The automated triggering from one mode to another will be dependent upon the percentage of oxygen saturation of the patient, monitored from the SpO2 sensor. The compressed airflow will be delivered to the patient according to his or her minute ventilation, derived with the aid of a temperature sensor-based algorithm.
Results
The compressor circuitry controller ensures that the patient receives compressed air as per the flow rate decided by the system. At the end of the drug delivery, if the liquid level sensor detects the absence of medication within the nebulizer chamber, the nebulization process will be terminated.
Conclusions
The dynamic regulation of the motor speed with respect to the minute ventilation was accomplished successfully. A laminar flow was obtained from the outlet of the compressor towards the nebulizer tubing, and a turbulent flow was obtained within the chamber, as expected. No excessive turbulent flows or rotational flow patterns were detected. The result could certainly lead to the improvements of the existing nebulizers.