[1] E. Brinksmeier and R. Janssen, "Drilling of Multi-Layer Composite Materials consisting of Carbon Fiber Reinforced Plastics (CFRP), Titanium and Aluminum Alloys," CIRP Annals - Manufacturing Technology, vol. 51, pp. 87-90, 2002/01/01/ 2002.
[2] J. Xu, A. Mkaddem, and M. El Mansori, "Recent advances in drilling hybrid FRP/Ti composite: a state-of-the-art review," Composite Structures, vol. 135, pp. 316-338, 2016.
[3] K.-H. Park, A. Beal, P. Kwon, and J. Lantrip, "A comparative study of carbide tools in drilling of CFRP and CFRP-Ti stacks," Journal of Manufacturing Science and Engineering, vol. 136, p. 014501, 2014.
[4] K.-H. Park, A. Beal, P. Kwon, and J. Lantrip, "Tool wear in drilling of composite/titanium stacks using carbide and polycrystalline diamond tools," Wear, vol. 271, pp. 2826-2835, 2011.
[5] J. Xu and M. El Mansori, "Wear characteristics of polycrystalline diamond tools in orthogonal cutting of CFRP/Ti stacks," Wear, vol. 376, pp. 91-106, 2017.
[6] I. Shyha, S. L. Soo, D. Aspinwall, S. Bradley, R. Perry, P. Harden, et al., "Hole quality assessment following drilling of metallic-composite stacks," International Journal of Machine Tools and Manufacture, vol. 51, pp. 569-578, 2011.
[7] D. Kim and M. Ramulu, "Study on the drilling of titanium/graphite hybrid composites," Journal of Engineering Materials and Technology, vol. 129, pp. 390-396, 2007.
[8] S. Malhotra, "Some studies on drilling of fibrous composites," Journal of Materials Processing Technology, vol. 24, pp. 291-300, 1990.
[9] S. Lin and I. Chen, "Drilling carbon fiber-reinforced composite material at high speed," Wear, vol. 194, pp. 156-162, 1996.
[10] S. Rawat and H. Attia, "Wear mechanisms and tool life management of WC–Co drills during dry high speed drilling of woven carbon fibre composites," Wear, vol. 267, pp. 1022-1030, 2009.
[11] R. Hussein, A. Sadek, M. A. Elbestawi, and M. H. Attia, "An Investigation into Tool Wear and Hole Quality during Low-Frequency Vibration-Assisted Drilling of CFRP/Ti6Al4V Stack," Journal of Manufacturing and Materials Processing, vol. 3, p. 63, 2019.
[12] A. Poutord, F. Rossi, G. Poulachon, R. M'Saoubi, and G. Abrivard, "Local approach of wear in drilling Ti6Al4V/CFRP for stack modelling," Procedia CIRP, vol. 8, pp. 316-321, 2013.
[13] R. Hussein, A. Sadek, M. A. Elbestawi, and M. H. Attia, "Surface and microstructure characterization of low-frequency vibration-assisted drilling of Ti6Al4V," The International Journal of Advanced Manufacturing Technology, vol. 103, pp. 1443-1457, July 01 2019.
[14] D. Kim, C. Sturtevant, and M. Ramulu, "Usage of PCD tool in drilling of titanium/graphite hybrid composite laminate," International Journal of Machining and Machinability of Materials, vol. 13, pp. 276-288, 2013.
[15] O. Isbilir and E. Ghassemieh, "Comparative study of tool life and hole quality in drilling of CFRP/titanium stack using coated carbide drill," Machining Science and Technology, vol. 17, pp. 380-409, 2013.
[16] R. A. Weiss, Portable air feed peck drilling of graphite composite, titanium and other materials in dissimilar combinations: Society of Manufacturing Engineers, 1989.
[17] B. Denkena, D. Boehnke, and J. Dege, "Helical milling of CFRP–titanium layer compounds," CIRP Journal of manufacturing Science and Technology, vol. 1, pp. 64-69, 2008.
[18] H. Wang, X. Qin, H. Li, and Y. Tan, "A comparative study on helical milling of CFRP/Ti stacks and its individual layers," The International Journal of Advanced Manufacturing Technology, vol. 86, pp. 1973-1983, 2016.
[19] O. Pecat and E. Brinksmeier, "Low damage drilling of CFRP/titanium compound materials for fastening," Procedia CIRP, vol. 13, pp. 1-7, 2014.
[20] J. Lonfier and C. De Castelbajac, "A Comparison between Regular and Vibration-Assisted Drilling in CFRP/Ti6Al4V Stack," SAE International Journal of Materials and Manufacturing, vol. 8, pp. 18-26, 2015.
[21] A. Sadek, "Vibration Assisted Drilling of Multidirectional Fiber Reinforced Polymer Laminates," Ph.D. Thesis, McGill University Libraries, 2014.
[22] A. Sadek, M. Meshreki, and M. Attia, "Effect of Tool Kinematics on the Drilling Forces and Temperature in Low Frequency High Amplitude Vibration Assisted Drilling," in ASME 2014 International Mechanical Engineering Congress and Exposition, 2014, pp. V02AT02A035-V02AT02A035.
[23] R. Hussein, A. Sadek, M. A. Elbestawi, and M. H. Attia, "Surface and microstructure characterization of low-frequency vibration-assisted drilling of Ti6Al4V," The International Journal of Advanced Manufacturing Technology, vol. 103, pp. 1443-1457, April 05 2019.
[24] O. Pecat and I. Meyer, "Low frequency vibration assisted drilling of aluminium alloys," in Advanced Materials Research, 2013, pp. 131-138.
[25] R. Hussein, A. Sadek, M. A. Elbestawi, and M. Attia, "Low-frequency vibration-assisted drilling of hybrid CFRP/Ti6Al4V stacked material," International Journal of Advanced Manufacturing Technology, vol. 98, pp. 2801-2817, Oct 2018.
[26] H. Yang, Y. Chen, J. Xu, M. Ladonne, J. Lonfier, and Y. Fu, "Tool wear mechanism in low-frequency vibration–assisted drilling of CFRP/Ti stacks and its individual layer," The International Journal of Advanced Manufacturing Technology, pp. 1-13, 2019.
[27] C. Li, J. Xu, M. Chen, Q. An, M. El Mansori, and F. Ren, "Tool wear processes in low frequency vibration assisted drilling of CFRP/Ti6Al4V stacks with forced air-cooling," Wear, vol. 426, pp. 1616-1623, 2019.
[28] M. Senthilkumar, A. Prabukarthi, and V. Krishnaraj, "Machining of CFRP/Ti6Al4V stacks under minimal quantity lubricating condition," Journal of Mechanical Science and Technology, vol. 32, pp. 3787-3796, 2018.
[29] O. Pecat and E. Brinksmeier, "Tool wear analyses in low frequency vibration assisted drilling of CFRP/Ti6Al4V stack material," Procedia CIRP, vol. 14, pp. 142-147, 2014.
[30] A. Sadek, M. Attia, M. Meshreki, and B. Shi, "Characterization and optimization of vibration-assisted drilling of fibre reinforced epoxy laminates," CIRP Annals-Manufacturing Technology, vol. 62, pp. 91-94, 2013.
[31] I. Standard, "3685," Tool-life Testing with Single Point Turning Tools, 1993.
[32] S. Kim, D. Lee, M. Kang, and J. Kim, "Evaluation of machinability by cutting environments in high-speed milling of difficult-to-cut materials," Journal of materials processing technology, vol. 111, pp. 256-260, 2001.
[33] Y. Su, N. He, L. Li, and X. Li, "An experimental investigation of effects of cooling/lubrication conditions on tool wear in high-speed end milling of Ti-6Al-4V," Wear, vol. 261, pp. 760-766, 2006.
[34] J. Vieira, A. Machado, and E. Ezugwu, "Performance of cutting fluids during face milling of steels," Journal of Materials Processing Technology, vol. 116, pp. 244-251, 2001.
[35] S. Yuan, L. Yan, W. Liu, and Q. Liu, "Effects of cooling air temperature on cryogenic machining of Ti–6Al–4V alloy," Journal of Materials Processing Technology, vol. 211, pp. 356-362, 2011.
[36] P. Zhang, N. Churi, Z. J. Pei, and C. Treadwell, "Mechanical drilling processes for titanium alloys: a literature review," Machining Science and Technology, vol. 12, pp. 417-444, 2008.
[37] S. Sharif and E. A. Rahim, "Performance of coated- and uncoated-carbide tools when drilling titanium alloy—Ti–6Al4V," Journal of Materials Processing Technology, vol. 185, pp. 72-76, 4/30/ 2007.
[38] M. Ramulu, T. Branson, and D. Kim, "A study on the drilling of composite and titanium stacks," Composite Structures, vol. 54, pp. 67-77, 10// 2001.
[39] R. Hussein, A. Sadek, M. A. Elbestawi, and M. H. Attia, "Chip Morphology and Delamination Characterization for Vibration-Assisted Drilling of Carbon Fiber-Reinforced Polymer," Journal of Manufacturing and Materials Processing, vol. 3, p. 23, 2019.