1. Kodonas K, Gogos C, Tziafa C. Effect of simulated pulpal microcirculation on intrachamber temperature changes following application of various curing units on tooth surface. J Dent 2009;37:485-90. doi: 10.1016/j.jdent.2009.03.006.
2. Jo S-A, Lee C-H, Kim M-J, Ferracane J, Lee I-B. Effect of pulse-width-modulated LED light on the temperature change of composite in tooth cavities. Dental Materials 2019;35:554-63. doi:
3. Guiraldo RD, Consani S, Mastrofrancisco S, Consani RL, Sinhoreti MA, Correr-Sobrinho L. Influence of light curing unit and ceramic thickness on temperature rise during resin cement photo-activation. Bull Tokyo Dent Coll 2008;49:173-8. doi: 10.2209/tdcpublication.49.173.
4. Gross DJ, Dávila-Sánchez A, Runnacles P, et al. In vivo temperature rise and acute inflammatory response in anesthetized human pulp tissue of premolars having Class V preparations after exposure to Polywave® LED light curing units. Dent Mater 2020;36:1201-13. doi: 10.1016/j.dental.2020.05.015.
5. Runnacles P, Arrais CA, Pochapski MT, et al. In vivo temperature rise in anesthetized human pulp during exposure to a polywave LED light curing unit. Dent Mater 2015;31:505-13. doi: 10.1016/j.dental.2015.02.001.
6. Zach L, Cohen G. PULP RESPONSE TO EXTERNALLY APPLIED HEAT. Oral Surg Oral Med Oral Pathol 1965;19:515-30. doi: 10.1016/0030-4220(65)90015-0.
7. Rajesh Ebenezar AV, Anilkumar R, Indira R, Ramachandran S, Srinivasan MR. Comparison of temperature rise in the pulp chamber with different light curing units: An in-vitro study. J Conserv Dent 2010;13:132-5. doi: 10.4103/0972-0707.71644.
8. Atai M, Motevasselian F. Temperature rise and degree of photopolymerization conversion of nanocomposites and conventional dental composites. Clin Oral Investig 2009;13:309-16. doi: 10.1007/s00784-008-0236-2.
9. Murchison DF, Moore BK. Influence of curing time and distance on microhardness of eight light-cured liners. Oper Dent 1992;17:135-41. doi:
10. Chung KH, Greener EH. Correlation between degree of conversion, filler concentration and mechanical properties of posterior composite resins. J Oral Rehabil 1990;17:487-94. doi: 10.1111/j.1365-2842.1990.tb01419.x.
11. Knezević A, Tarle Z, Meniga A, Sutalo J, Pichler G, Ristić M. Degree of conversion and temperature rise during polymerization of composite resin samples with blue diodes. J Oral Rehabil 2001;28:586-91. doi: 10.1046/j.1365-2842.2001.00709.x.
12. Schneider LF, Consani S, Correr-Sobrinho L, Correr AB, Sinhoreti MA. Halogen and LED light curing of composite: temperature increase and Knoop hardness. Clin Oral Investig 2006;10:66-71. doi: 10.1007/s00784-005-0028-x.
13. Hannig M, Bott B. In-vitro pulp chamber temperature rise during composite resin polymerization with various light-curing sources. Dent Mater 1999;15:275-81. doi: 10.1016/s0109-5641(99)00047-0.
14. Bouillaguet S, Caillot G, Forchelet J, Cattani-Lorente M, Wataha JC, Krejci I. Thermal risks from LED- and high-intensity QTH-curing units during polymerization of dental resins. J Biomed Mater Res B Appl Biomater 2005;72:260-7. doi: 10.1002/jbm.b.30143.
15. Hubbezoglu I, Dogan A, Dogan OM, Bolayir G, Bek B. Effects of light curing modes and resin composites on temperature rise under human dentin: an in vitro study. Dent Mater J 2008;27:581-9. doi: 10.4012/dmj.27.581.
16. Yap AU, Soh MS. Thermal emission by different light-curing units. Oper Dent 2003;28:260-6. doi:
17. Baroudi K, Silikas N, Watts DC. In vitro pulp chamber temperature rise from irradiation and exotherm of flowable composites. Int J Paediatr Dent 2009;19:48-54. doi: 10.1111/j.1365-263X.2007.00899.x.
18. Hamze F, Ganjalikhan Nasab SA, Eskandarizadeh A, Shahravan A, Akhavan Fard F, Sinaee N. Thermal Scanning of Dental Pulp Chamber by Thermocouple System and Infrared Camera during Photo Curing of Resin Composites. Iran Endod J 2018;13:195-99. doi: 10.22037/iej.v13i2.18756.
19. da Silva EM, Penelas AG, Simão MS, Filho JD, Poskus LT, Guimarães JG. Influence of the degree of dentine mineralization on pulp chamber temperature increase during resin-based composite (RBC) light-activation. J Dent 2010;38:336-42. doi: 10.1016/j.jdent.2009.12.007.
20. Gindri LD, Fröhlich TT, Rosso CR, Rocha RO. Etching time and bonding of adhesive systems to dentin of primary teeth: A systematic review and meta-analysis. Int J Paediatr Dent 2021;31:122-30. doi: 10.1111/ipd.12711.
21. Agematsu H, Abe S, Shiozaki K, et al. Relationship between large tubules and dentin caries in human deciduous tooth. Bull Tokyo Dent Coll 2005;46:7-15. doi: 10.2209/tdcpublication.46.7.
22. Gul P, Celik N, Ozgeris FB, Demirkaya-Miloglu F, Kiziltunc A, Seven N. Effects of Bisphenol A Released From Composite Fillings on Reproductive Hormone Levels in Men. Int Dent J 2021;71:343-51. doi: 10.1016/j.identj.2020.12.008.
23. Buyukkok C, Kaptan A. Temperature increases in primary teeth pulp chamber during polymerization of glass ionomer-based restorative materials. Eur Oral Res 2021;55:28-33. doi: 10.26650/eor.20210024.
24. Uhl A, Völpel A, Sigusch BW. Influence of heat from light curing units and dental composite polymerization on cells in vitro. J Dent 2006;34:298-306. doi: 10.1016/j.jdent.2005.07.004.
25. Uhl A, Mills RW, Jandt KD. Polymerization and light-induced heat of dental composites cured with LED and halogen technology. Biomaterials 2003;24:1809-20. doi: 10.1016/s0142-9612(02)00585-9.
26. Shortall AC, Harrington E. Temperature rise during polymerization of light-activated resin composites. J Oral Rehabil 1998;25:908-13. doi: 10.1046/j.1365-2842.1998.00336.x.
27. 3M ESPE Dental Products. Instructions for Use Filtek Z250, 2014 Available from: https://multimedia.3m.com/mws/media/219552O/3m-filtek-z250-universal-restorative-instructions.pdf Accessed 13 April 2022]
28. Hosaka K, Kubo S, Tichy A, et al. Clinical effectiveness of direct resin composite restorations bonded using one-step or two-step self-etch adhesive systems: A three-year multicenter study. Dent Mater J 2021;40:1151-59. doi: 10.4012/dmj.2020-428.
29. Dogan A, Hubbezoglu I, Dogan OM, Bolayir G, Demir H. Temperature rise induced by various light curing units through human dentin. Dent Mater J 2009;28:253-60. doi: 10.4012/dmj.28.253.
30. Koutsi V, Noonan RG, Horner JA, Simpson MD, Matthews WG, Pashley DH. The effect of dentin depth on the permeability and ultrastructure of primary molars. Pediatr Dent 1994;16:29-35. doi:
31. Mjör IA. Dentin-predentin complex and its permeability: pathology and treatment overview. J Dent Res 1985;64 Spec No:621-7. doi: 10.1177/002203458506400420.
32. Ohmoto K, Taira M, Shintani H, Yamaki M. Studies on dental high-speed cutting with carbide burs used on bovine dentin. J Prosthet Dent 1994;71:319-23. doi: 10.1016/0022-3913(94)90475-8.
33. Jandt KD, Mills RW. A brief history of LED photopolymerization. Dent Mater 2013;29:605-17. doi: 10.1016/j.dental.2013.02.003.
34. Al-Qudah AA, Mitchell CA, Biagioni PA, Hussey DL. Effect of composite shade, increment thickness and curing light on temperature rise during photocuring. J Dent 2007;35:238-45. doi: 10.1016/j.jdent.2006.07.012.
35. Unsal KA, Karaman E. Effect of Additional Light Curing on Colour Stability of Composite Resins. Int Dent J 2021. doi: 10.1016/j.identj.2021.06.006.
36. Loney RW, Price RB. Temperature transmission of high-output light-curing units through dentin. Oper Dent 2001;26:516-20. doi:
37. Aguiar FH, Barros GK, Lima DA, Ambrosano GM, Lovadino JR. Effect of composite resin polymerization modes on temperature rise in human dentin of different thicknesses: an in vitro study. Biomed Mater 2006;1:140-3. doi: 10.1088/1748-6041/1/3/008.
38. Chang HS, Cho KJ, Park SJ, et al. Thermal analysis of bulk filled composite resin polymerization using various light curing modes according to the curing depth and approximation to the cavity wall. J Appl Oral Sci 2013;21:293-9. doi: 10.1590/1678-775720130036.
39. Guiraldo RD, Consani S, Consani RL, et al. Comparison of silorane and methacrylate-based composites on the polymerization heat generated with different light-curing units and dentin thicknesses. Braz Dent J 2013;24:258-62. doi: 10.1590/0103-6440201301904.
40. Lin M, Xu F, Lu TJ, Bai BF. A review of heat transfer in human tooth—experimental characterization and mathematical modeling. Dental Materials 2010;26:501-13. doi:
41. Soh M, Yap AU. Influence of curing modes on crosslink density in polymer structures. J Dent 2004;32:321-26. doi:
42. Runnacles P, Arrais CAG, Maucoski C, Coelho U, De Goes MF, Rueggeberg FA. Comparison of in vivo and in vitro models to evaluate pulp temperature rise during exposure to a Polywave® LED light curing unit. J Appl Oral Sci 2019;27:e20180480. doi: 10.1590/1678-7757-2018-0480.