[1] Colombo P, Dunand DC, Kumar V. Porous materials: Less is more. J Mater Res 2013, 28: 2187- 2190.
[2] Li F, Huang X, Liu JX, et al. Sol-gel derived porous ultra-high temperature ceramics. J Adv Ceram 2020, 9: 1-16.
[3] Yan S, Pan Y, Wang L, et al. Synthesis of low-cost porous ceramic microspheres from waste gangue for dye adsorption. J Adv Ceram 2018, 7:30–40.
[4] Wu JM, Zhang XY, Xu J, et al. Preparation of porous Si3N4 ceramics via tailoring solid loading of Si3N4 slurry and Si3N4 poly-hollow microsphere content. J Adv Ceram 2015, 4:260–266.
[5] Xiong Y, Tang Z, Wang Y, et al. Gas sensing capabilities of TiO2 porous nanoceramics prepared through premature sintering. J Adv Ceram 2015, 4: 152-157.
[6] Hammel EC, Ighodaro OLR, Okoli OI. Processing and properties of advanced porous ceramics: An application based review. Ceram Int 2004, 40: 15351-15370.
[7] Ohji T, Fukushima M. Macro-porous ceramics: Processing and properties. Int Mater Rev 2012, 57: 115-131.
[8] Guzman IY. Certain principles of formation of porous ceramic structures. Properties and application. Glass Ceram 2003, 60: 280-283.
[9] Li D, Li M. Porous Y2SiO5 ceramic with low thermal conductivity. J Mater Sci Technol 2012, 28: 799-802.
[10] Wu JM, Chen Y, Zhang XY, et al. Phase evolution and properties of novel Al2O3-based poly-hollow microsphere (PHM) ceramics. J Adv Ceram 2016, 5:176–182.
[11] Liu J, Huo W, Zhang X, et al. Optimal design on the high-temperature mechanical properties of porous alumina ceramics based on fractal dimension analysis. J Adv Ceram 2018, 7:89–98.
[12] Tsuruki Y, Sakai M, Isobe T, et al. Static and dynamic hydrophobicity of alumina-based porous ceramics impregnated with fluorinated oil. J Mater Res 2014, 29: 1546-1555.
[13] Shimizu T, Matsuura K, Furue H, et al. Thermal conductivity of high porosity alumina refractory bricks made by a slurry gelation and foaming method. J Eur Ceram Soc 2013, 33: 3429-3435.
[14] Isobe T, Kameshima Y, Nakajima A, et al. Gas permeability and mechanical properties of porous alumina ceramics with unidirectionally aligned pores. J Eur Ceram Soc 2007, 27: 53-59.
[15] Chen X, Du J, Gan G, et al. Effect of solid content on performance of porous alumina ceramic by gel-foaming. Adv Mater Res 2012, 476-478: 1007-1010.
[16] Gregorová E, Pabst W, Živcová Z, et al. Porous alumina ceramics prepared with wheat flour. J Eur Ceram Soc 2010, 30: 2871-2880.
[17] Colonetti VC, Sanches MF, de Souza VC, et al. Cellular ceramics obtained by a combination of direct foaming of soybean oil emulsified alumina suspensions with gel consolidation using gelatin. Ceram Int 2018, 44: 2436-2445.
[18] Ishizaki K, Komarneni S, Nanko M. Porous Materials: Process, Technology and Applications. Kluwer Academic, 1998.
[19] Prabhakaran K, Melkeri A, Gokhale NM, et al. Preparation of macroporous alumina ceramics using wheat particles as gelling and pore forming agent. Ceram Int 2007, 33: 77-81.
[20] Cutler IB, Bradshaw C, Christensen CJ, et al. Sintering of alumina at temperatures of 1400oC and below. J Am Ceram Soc 1957, 40: 134-139.
[21] Harun Z, Ismail NF, Badarulzaman NA. Effect of MgO additive on microstructure of Al2O3. Adv Mater Res 2012, 488-489: 335-339.
[22] Behera PS, Sarkar R, Bhattacharyya S. Nano alumina: A review of the powder synthesis method. Interceram – Int Ceram Rev 2016, 65: 10-16.
[23] Rajendran S. Production of ultrafine alpha alumina powders and fabrication of fine-grained strong ceramics. J Mater Sci 1994, 29: 5664-5672.
[24] Krell A, Blank P. Grain size dependence of hardness in dense submicrometer alumina. J Am Ceram Soc 1995, 78: 1118-1120.
[25] Studart AR, Gonzenbach UT, Tervoort EJ, et al. Processing routes to macroporous ceramics: A review. J Am Ceram Soc 2006, 89: 1771-1789.
[26] Vakifahmetoglu C, Semerci T, Soraru GD. Closed porosity ceramics and glasses. J Am Ceram Soc 2020, 103: 2941-2969.
[27] Chevalier E, Chulia D, Pouget C, et al. Fabrication of porous substrates: A review of processes using pore forming agents in the biomaterial field. J Pharm Sci 2008, 97: 1135-1154.
[28] Xue LA, Chen IW. Low-temperature sintering of alumina with liquid-forming additives. J Am Ceram Soc 1991, 74: 2011-2013.
[29] Zivcová Z, Gregorová E, Pabst W. Alumina ceramics prepared with new pore-forming agents. Process Appl Ceram 2008, 2: 1-8.
[30] Wang YQ, Tao J, Zhang JJ, et al. Effects of addition of NH4HCO3 on pore characteristics and compressive properties of porous Ti-10%Mg composites. Trans Nonferr Met Soc China 2011, 21: 1074-1079.
[31] Ali MS, Hanim MAA, Tahir SM, et al. Preparation and characterization of porous alumina ceramics using different pore agents. J Ceram Soc Japan 2017, 125: 402-412.
[32] Mohanta K, Kumar A, Parkash O, et al. Low cost porous alumina with tailored microstructure and thermal conductivity prepared using rice husk and sucrose. J Am Ceram Soc 2014, 97: 1708-1719.
[33] Kim YW, Kim SH, Kim HD, et al. Processing of closed-cell silicon oxycarbide foams from a preceramic polymer. J Mater Sci 2004, 39: 5647-5652.
[34] Devavarapu S, Chaudhuri P, Shrivastava A, et al. Processing of porous alumina by foaming method-effect of foaming agent, solid loading and binder. Ceram Int 2019, 45: 12264-12273.
[35] Kim YW, Jin YJ, Chun YS, et al. A simple pressing route to closed-cell microcellular ceramics. Scr Mater 2005, 53: 921-925.
[36] Bakkar S, Lee J, Ku N, et al. Design of porous aluminum oxide ceramics using magnetic field-assisted freeze-casting. J Mater Res 2020, 35: 2859-2869.
[37] Tulliani JM, Lombardi M, Palmero P, et al. Development and mechanical characterization of novel ceramic foams fabricated by gel-casting. J Eur Ceram Soc 2013, 33: 1567-1576.
[38] Le HM, Nguyen DM, Dang KQ. Influence of sintering additives on the porous structure and mechanical properties of porous alumina. J Sci Technol Tech Univ 2017, 119: 71-75.
[39] Le HM, Nguyen DM, Dang KQ. Synthesis of highly porous alumina via powder metallurgy method using TiO2 as sintering additive. J Sci Technol Tech Univ 2018, 124: 57-62.
[40] Macêdo MIF, Bertran CA, Osawa CC. Kinetics of the γ → α-alumina phase transformation by quantitative X-ray diffraction. J Mater Sci 2007, 42: 2830-2936.
[41] Bodaghi M, Mirhabibi AR, Zolfonun H, et al. Investigation of phase transition of γ-alumina to α-alumina via mechanical milling method. Ph Transit 2008, 81: 571-580.
[42] Patil KC, Hegde MS, Rattan T, et al. Chemistry of Nanocrystalline Oxide Materials: Combustion Synthesis, Properties and Applications. Singarpore: World Scientific, 2008.
[43] Bondioli F, Ferrari AM, Leonelli C, et al. Reaction mechanism in alumina/chromia (Al2O3-Cr2O3) solid solutions obtained by coprecipitation. J Am Ceram Soc 2000, 83: 2036-2040.
[44] Dang KQ, Nanko M. Effects of pressure and temperature on sintering of Cr-doped Al2O3 by pulsed electric current sintering process. IOP Conf Ser Mater Sci Eng 2011, 20: 012004.