[1] Barsoum MW. The MN+1AXN phases: A new class of solids: Thermodynamically stable nanolaminates. Prog Solid State Chem 2000, 28: 201-281.
[2] Barsoum MW, El-Raghy T. Synthesis and characterization of a remarkable ceramic: Ti3SiC2. J Am Ceram Soc 1996, 79: 1953-1956.
[3] El-Raghy T, Zavaliangos A, Barsoum MW, et al. Damage Mechanisms around Hardness Indentations in Ti3SiC2. J Am Ceram Soc 2005, 80: 513-516.
[4] Barsoum M, El-Raghy T. A progress report on Ti3SiC2, Ti3GeC2, and the H-phases, M2BX. J Mater Synth Process 1997, 5: 197-216.
[5] Zhou Y, Sun Z, Chen S, et al. In-situ hot pressing/solid-liquid reaction synthesis of dense titanium silicon carbide bulk ceramics. Mater Res Innovations 1998, 2: 142-146.
[6] Sun Z, Zhou Y, Li M. Oxidation behaviour of Ti3SiC2-based ceramic at 900-1300°C in air. Corros Sci 2001, 43: 1095-1109.
[7] Gao NF, Miyamoto Y, Zhang D. Dense Ti3SiC2 prepared by reactive HIP. J Mater Sci 1999, 34: 4385-4392.
[8] Ghosh NC, Harimkar SP. Phase analysis and wear behavior of in-situ spark plasma sintered Ti3SiC2. Ceram Int 2013, 39: 6777-6786.
[9] Górny G, Rączka M, Stobierski L, et al. Ceramic composite Ti3SiC2-TiB2 Microstructure and mechanical properties. Mater Charact 2009, 60: 1168-1174.
[10] Li S-B, Xie J-X, Zhang L-T, et al. Mechanical properties and oxidation resistance of Ti3SiC2/SiC composite synthesized by in situ displacement reaction of Si and TiC. Mater Lett 2003, 57: 3048-3056.
[11] Benko E, Klimczyk P, Mackiewicz S, et al. cBN-Ti3SiC2 composites. Diam Relat Mater 2004, 13: 521-525.
[12] Tian W, Sun Z, Hashimoto H, et al. Synthesis, microstructure and mechanical properties of Ti3SiC2-TiC composites pulse discharge sintered from Ti/Si/TiC powder mixture. Mater Sci Eng, A 2009, 526: 16-21.
[13] Wang HJ, Jin ZH, Miyamoto Y. Effect of Al2O3 on mechanical properties of Ti3SiC2/Al2O3 composite. Ceram Int 2002, 28: 931-934.
[14] Shi SL, Pan W. Toughening of Ti3SiC2 with 3Y-TZP addition by spark plasma sintering. Mater Sci Eng, A 2007, 447: 303-306.
[15] Hou LG, Wu RZ, Wang XD, et al. Microstructure, mechanical properties and thermal conductivity of the short carbon fiber reinforced magnesium matrix composites. J Alloys compd 2017, 695: 2820-2826.
[16] Li S, Zhang Y, Han J, et al. Effect of carbon particle and carbon fiber on the microstructure and mechanical properties of short fiber reinforced reaction bonded silicon carbide composite. J Eur Ceram Soc 2013, 33: 887-896.
[17] Hong W, Gui K, Hu P, et al. Preparation and characterization of high-performance ZrB2–SiC–Cf composites sintered at 1450 °C. J Adv Ceram 2017, 6: 110-119.
[18] Wang M, Zhang Z, Sun Z, et al. Effect of fiber type on mechanical properties of short carbon fiber reinforced B4C composites. Ceram Int 2009, 35: 1461-1466.
[19] Yang F, Zhang X, Han J, et al. Characterization of hot-pressed short carbon fiber reinforced ZrB2-SiC ultra-high temperature ceramic composites. J Alloys compd 2009, 472: 395-399.
[20] Lagos MA, Pellegrini C, Agote I, et al. Ti3SiC2-Cf composites by spark plasma sintering: Processing, microstructure and thermo-mechanical properties. J Eur Ceram Soc 2019, 39: 2824-2830.
[21] Tang C, Li T, Gao J, et al. Microstructure and mechanical behavior of the Cf/Ti3SiC2-SiC composites fabricated by compression molding and pressureless sintering. Ceram Int 2017, 43: 16204-16209.
[22] Zhou X, Yang H, Chen F, et al. Joining of carbon fiber reinforced carbon composites with Ti3SiC2 tape film by electric field assisted sintering technique. Carbon 2016, 102: 106-115.
[23] Gui K, Liu F, Wang G, et al. Microstructural evolution and performance of carbon fiber-toughened ZrB2 ceramics with SiC or ZrSi2 additive. J Adv Ceram 2018, 7: 343-351.
[24] Qin J, He D. Phase stability of Ti3SiC2 at high pressure and high temperature. Ceram Int 2013, 39: 9361-9367.
[25] Sun Z, Zhou J, Music D, et al. Phase stability of Ti3SiC2 at elevated temperatures. Scripta Mater 2006, 54: 105-107.
[26] Racault C, Langlais F, Naslain R. Solid-state synthesis and characterization of the ternary phase Ti3SiC2. J Mater Sci 1994, 29: 3384-3392.
[27] El-Raghy T, Barsoum MW. Diffusion kinetics of the carburization and silicidation of Ti3SiC2. J Appl Phys 1998, 83: 112-119.
[28] Gao N, Miyamoto Y, Zhang D. On physical and thermochemical properties of high-purity Ti3SiC2. Mater Lett 2002, 55: 61-66.
[29] Ghosh NC, Harimkar SP. Microstructure and wear behavior of spark plasma sintered Ti3SiC2 and Ti3SiC2-TiC composites. Ceram Int 2013, 39: 4597-4607.
[30] Yin XW, Cheng LF, Zhang LT, et al. Fibre-reinforced multifunctional SiC matrix composite materials. Int Mater Rev 2016, 62: 117-172.
[31] Zhang J, Wang L, Jiang W, et al. Effect of TiC content on the microstructure and properties of Ti3SiC2-TiC composites in situ fabricated by spark plasma sintering. Mater Sci Eng, A 2008, 487: 137-143.
[32] Karimirad S, Balak Z. Characteristics of spark plasma sintered ZrB2-SiC-SCFs composites. Ceram Int 2019, 45: 6275-6281.
[33] Shahedi Asl M. Microstructure, hardness and fracture toughness of spark plasma sintered ZrB2-SiC-Cf composites. Ceram Int 2017, 43: 15047-15052.
[34] Brennan JJ, McCarthy G. Interfacial studies of refractory glass-ceramic matrix/advanced SiC-fiber reinforced composites. Mater Sci Eng, A 1993, 162: 53-72.
[35] He X, Guo Y, Yu Z, et al. Study on microstructures and mechanical properties of short-carbon-fiber-reinforced SiC composites prepared by hot-pressing. Mater Sci Eng, A 2009, 527: 334-338.
[36] Arai Y, Inoue R, Goto K, et al. Carbon fiber reinforced ultra-high temperature ceramic matrix composites: A review. Ceram Int 2019, 45: 14481-14489.
[37] Wang C, Chen L, Li J, et al. Enhancing the interfacial strength of carbon fiber reinforced epoxy composites by green grafting of poly (oxypropylene) diamines. Composites Part A 2017, 99: 58-64.
[38] Sun J, Zhao F, Yao Y, et al. High efficient and continuous surface modification of carbon fibers with improved tensile strength and interfacial adhesion. Appl Surf Sci 2017, 412: 424-435.
[39] Yang WS, Biamino S, Padovano E, et al. Microstructure and mechanical properties of short carbon fibre/SiC multilayer composites prepared by tape casting. Composites Sci Technol 2012, 72: 675-680.
[40] Guo S, Hu C, Gao H, et al. SiC(SCS-6) fiber-reinforced Ti3AlC2 matrix composites: Interfacial characterization and mechanical behavior. J Eur Ceram Soc 2015, 35: 1375-1384.