Ahmad, A., Wahab, M. S., Shah, A. S. M., Kamarudin, K., & Hehsan, H. (2019). Optimization of processing parameters for plastic injection moulding process towards moulded part shrinkage. AIP Conference Proceedings, 2129(July). https://doi.org/10.1063/1.5118176
Ayun, A. H. Q., Triyono, J., & Pujiyanto, E. (2022). Optimization of Injection Molding Simulation of Bioabsorbable Bone Screw Using Taguchi Method and Particle Swarm Optimization. Jordan Journal of Mechanical and Industrial Engineering, 16(2), 319–325.
Azad, R., & Shahrajabian, H. (2019). Experimental study of warpage and shrinkage in injection molding of HDPE/rPET/wood composites with multiobjective optimization. Materials and Manufacturing Processes, 34(3), 274–282. https://doi.org/10.1080/10426914.2018.1512123
Azdast, T., & Hasanzadeh, R. (2019). Experimental assessment and optimization of shrinkage behavior of injection molded polycarbonate parts. Materials Research Express, 6(11). https://doi.org/10.1088/2053-1591/ab4b19
Bengio, Y. (2007). On the challenge of learning complex functions. Progress in Brain Research, 165, 521–534. https://doi.org/10.1016/S0079-6123(06)65033-4
Bensingh, R. J., Machavaram, R., Boopathy, S. R., & Jebaraj, C. (2019). Injection molding process optimization of a bi-aspheric lens using hybrid artificial neural networks (ANNs) and particle swarm optimization (PSO). Measurement: Journal of the International Measurement Confederation, 134, 359–374. https://doi.org/10.1016/j.measurement.2018.10.066
Cao, Y., Fan, X., Guo, Y., Li, S., & Huang, H. (2020). Multi-objective optimization of injection-molded plastic parts using entropy weight, random forest, and genetic algorithm methods. Journal of Polymer Engineering, 40(4), 360–371. https://doi.org/10.1515/polyeng-2019-0326
Choi, G. H., Lee, K. D., Chang, N., & Kim, S. G. (1994). Optimization of Process Parameters of Injection Molding with Neural Network Application in a Process Simulation Environment. CIRP Annals, 43(1), 449–452. https://doi.org/10.1016/S0007-8506(07)62250-1
Chou, S., & Chen, J. (2018). Six Sigma-Based Optimization of Shrinkage Accuracy in Injection Molding Processes. Int. J. Ind. Manuf. Eng., 5(3), 3.
Cristianini, N., & Shawe-Taylor, J. (2000). An Introduction to Support Vector Machines and Other Kernel-based Learning Methods. An Introduction to Support Vector Machines and Other Kernel-Based Learning Methods. https://doi.org/10.1017/CBO9780511801389
Di Leo, G., & Sardanelli, F. (2020). Statistical significance: p value, 0.05 threshold, and applications to radiomics—reasons for a conservative approach. European Radiology Experimental, 4(1), 1–8. https://doi.org/10.1186/S41747-020-0145-Y/METRICS
Fernandes, C., Pontes, A. J., Viana, J. C., & Gaspar-Cunha, A. (2018). Modeling and Optimization of the Injection-Molding Process: A Review. Advances in Polymer Technology, 37(2), 429–449. https://doi.org/10.1002/ADV.21683
Gierth, M. M. (1992). Methoden und Hilfsmittel zur prozessnahen Qualitätssicherung beim Spritzgiessen von Thermoplasten.
Guo, W., Deng, F., Meng, Z., Hua, L., Mao, H., & Su, J. (2020). A hybrid back-propagation neural network and intelligent algorithm combined algorithm for optimizing microcellular foaming injection molding process parameters. Journal of Manufacturing Processes, 50(November 2018), 528–538. https://doi.org/10.1016/j.jmapro.2019.12.020
Heidari, B. S., Davachi, S. M., Moghaddam, A. H., Seyfi, J., Hejazi, I., Sahraeian, R., & Rashedi, H. (2018). Optimization simulated injection molding process for ultrahigh molecular weight polyethylene nanocomposite hip liner using response surface methodology and simulation of mechanical behavior. Journal of the Mechanical Behavior of Biomedical Materials, 81(January), 95–105. https://doi.org/10.1016/j.jmbbm.2018.02.025
Heinisch, J., Lockner, Y., & Hopmann, C. (2021). Comparison of design of experiment methods for modeling injection molding experiments using artificial neural networks. Journal of Manufacturing Processes, 61(December 2020), 357–368. https://doi.org/10.1016/j.jmapro.2020.11.011
Huang, W. T., Tsai, C. L., Ho, W. H., & Chou, J. H. (2021). Application of intelligent modeling method to optimize the multiple quality characteristics of the injection molding process of automobile lock parts. Polymers, 13(15). https://doi.org/10.3390/polym13152515
Kashyap, S., & Datta, D. (2015). Process parameter optimization of plastic injection molding: a review. International Journal of Plastics Technology, 1(19), 1–18. https://doi.org/10.1007/S12588-015-9115-2
Li, K., Yan, S., Zhong, Y., Pan, W., & Zhao, G. (2019). Multi-objective optimization of the fiber-reinforced composite injection molding process using Taguchi method, RSM, and NSGA-II. Simulation Modelling Practice and Theory, 91(September 2018), 69–82. https://doi.org/10.1016/j.simpat.2018.09.003
Lin, C. M., & Chen, W. C. (2020). Optimization of injection-molding processing conditions for plastic double-convex Fresnel lens using grey-based Taguchi method. Microsystem Technologies, 26(8), 2575–2588. https://doi.org/10.1007/s00542-020-04798-6
Lin, C. M., & Chen, Y. W. (2019). Grey optimization of injection molding processing of plastic optical lens based on joint consideration of aberration and birefringence effects. Microsystem Technologies, 25(2), 621–631. https://doi.org/10.1007/s00542-018-4001-4
Lin, H., Zou, W., Li, T., Feigenberg, S. J., Teo, B. K. K., & Dong, L. (2019). A Super-Learner Model for Tumor Motion Prediction and Management in Radiation Therapy: Development and Feasibility Evaluation. Scientific Reports 2019 9:1, 9(1), 1–11. https://doi.org/10.1038/s41598-019-51338-y
Mahapatra, S. S., & Patnaik, A. (2007). Optimization of wire electrical discharge machining (WEDM) process parameters using Taguchi method. International Journal of Advanced Manufacturing Technology, 34(9–10), 911–925. https://doi.org/10.1007/S00170-006-0672-6
Moayyedian, M., Abhary, K., & Marian, R. (2018). Optimization of injection molding process based on fuzzy quality evaluation and Taguchi experimental design. CIRP Journal of Manufacturing Science and Technology, 21, 150–160. https://doi.org/10.1016/j.cirpj.2017.12.001
Mukras, S. M. S. (2020). Experimental-based optimization of injection molding process parameters for short product cycle time. Advances in Polymer Technology, 2020. https://doi.org/10.1155/2020/1309209
Mukras, S. M. S., Omar, H. M., & al-Mufadi, F. A. (2019). Experimental-Based Multi-objective Optimization of Injection Molding Process Parameters. Arabian Journal for Science and Engineering, 44(9), 7653–7665. https://doi.org/10.1007/s13369-019-03855-1
Öktem, H., & Shinde, D. (2021). Determination of Optimal Process Parameters for Plastic Injection Molding of Polymer Materials Using Multi-Objective Optimization. Journal of Materials Engineering and Performance, 30(11), 8616–8632. https://doi.org/10.1007/s11665-021-06029-z
Ramesh, S., Nirmala, P., Ramkumar, G., Sahoo, S., Anitha, G., Gnanasekar, A. K., & Isaac Joshuaramesh Lalvani, J. (2021). Simulation Process of Injection Molding and Optimization for Automobile Instrument Parameter in Embedded System. Advances in Materials Science and Engineering, 2021. https://doi.org/10.1155/2021/9720297
Roslan, N., Rahim, S. Z. A., Abdellah, A. E. H., Abdullah, M. M. A. B., Błoch, K., Pietrusiewicz, P., Nabiałek, M., Szmidla, J., Kwiatkowski, D., Vasco, J. O. C., Saad, M. N. M., & Ghazali, M. F. (2021). Optimisation of shrinkage and strength on thick plate part using recycled ldpe materials. Materials, 14(7). https://doi.org/10.3390/ma14071795
Rostami, H. (2015). A New Support Vector Machine and Artificial Neural Networks for Prediction of Stuck Pipe in Drilling of Oil Fields. 2013–2016. https://doi.org/10.1115/1.4026917
Shiroud Heidari, B., Bappoo, N., Kelsey, L. J., Davachi, S. M., & Doyle, B. (2022). Multi-response optimization of shrinkage, clamp force, and part weight in simulated injection molding process of a dialysis micro-filter. Journal of Applied Polymer Science, 139(9), 1–12. https://doi.org/10.1002/app.51732
Song, Z., Liu, S., Wang, X., & Hu, Z. (2020). Optimization and prediction of volume shrinkage and warpage of injection-molded thin-walled parts based on neural network. International Journal of Advanced Manufacturing Technology, 109(3–4), 755–769. https://doi.org/10.1007/s00170-020-05558-6
STYRONTM 685D | UL Prospector. (n.d.). Retrieved August 8, 2022, from https://materials.ulprospector.com/en/profile/default?e=7335#T1CT0U0
Suhail, A. H., Ismail, N., Wong, S. V., & Jalil, N. A. A. (2010). Optimization of Cutting Parameters Based on Surface Roughness and Assistance of Workpiece Surface Temperature in Turning Process. American Journal of Engineering and Applied Sciences, 3(1), 102–108. https://doi.org/10.3844/AJEASSP.2010.102.108
Vaculik, R. (n.d.). Regelung der Formteilqualität beim Spritzgiessen auf der Basis statistischer Prozessmodelle = Improved control of part quality in injection molding based on statistical process models.