[1]. Rédei, G.P., Laser (light amplification by stimulated emission of radiation). 2008: Wiley‐VCH Verlag GmbH & Co. KGaA.
[2]. J, H., Short history of laser development. Applied Optics, 2010. 25(49): p. 99-122.
[3]. Jia, G., et al., Laser three-dimensional printing microchannel heat sink for high-power diode laser array. Optical ENGINEERING, 2016(55): p. 096105.
[4]. Kim, K.S., et al., A review on research and development of laser assisted turning. International Journal of Precision Engineering & Manufacturing, 2011. 4(12): p. 753-759.
[5]. Bartkowiak, K., et al., New Developments of Laser Processing Aluminium Alloys via Additive Manufacturing Technique. Physics Procedia, 2011. part-PA(12): p. 393-401.
[6]. Li, W., et al., Multi-synergy ablative effects of laminated SiO2-graphite/SiO2/Cu composite irradiated by high power laser. CERAMICS INTERNATIONAL, 2019. 45(12): p. 15272-15280.
[7]. Zheng, J.W.K.L., Laser irradiation behavior of plasma-sprayed tantalum oxide coatings. Ceramics International, 2020. 3(46): p. 3875-3881.
[8]. HANSEN, S.G. and T.E. ROBITAILLE, LASER ABLATION OF A POLYSILANE MATERIAL. JOURNAL OF APPLIED PHYSICS, 1987. 62(4): p. 1394-1399.
[9]. Chaoli Fu, Y.Y.Z.H., Investigation on the laser ablation of SiC ceramics using micro-Raman mapping technique. Journal of advanced ceramics, 2016. 5(3): p. 253-261.
[10]. Zhu, J., et al., Ablation Behavior of Plasma-Sprayed La1-xSrxTiO3+δ Coating Irradiated by High-Intensity Continuous Laser. ACS APPLIED MATERIALS & INTERFACES, 2017. 9(40): p. 35444-35452.
[11]. Chen, G., et al., Laser ablation protection of polymer matrix composites by adhesive inorganic coatings. Journal of Materials Science, 2017.
[12]. Guo, Y.L., et al., Damage and protection progress of materials irradiated by laser beam. (China). Materials Protection, 2003. 12(36): p. 8-10.
[13]. Jonnalagadda, K.P., et al., Hot Corrosion Mechanism in Multi-Layer Suspension Plasma Sprayed Gd2Zr2O7 /YSZ Thermal Barrier Coatings in the Presence of V2O5 + Na2SO4. Journal of Thermal Spray Technology, 2017. 26(1): p. 140-149.
[14]. Cherng, J.S., J.R. Sau and C.C. Chung, Aqueous electrophoretic deposition of YSZ electrolyte layers for solid oxide fuel cells. Journal of Solid State Electrochemistry, 2008. 12(7): p. 925-933.
[15]. Wang, J., et al., Microstructure and thermal properties of a promising thermal barrier coating: YTaO4. 2016: p. S0272884216308124.
[16]. Peng, W., X. Chong and J. Feng, Effect of Al3+ doping on mechanical and thermal properties of DyTaO4 as promising thermal barrier coating application. Journal of the American Ceramic Society, 2018. 5(101): p. 1818-1823.
[17]. Chen, L., et al., Synthesis and thermophysical properties of RETa3O9 (RE= Ce, Nd, Sm, Eu, Gd, Dy, Er) as promising thermal barrier coatings. Journal of the American Ceramic Society, 2018. 3(101): p. 1266-1278.
[18]. K., K.S., et al., Dilatometry and Dielectric Properties of Ba2RTaO6 (R= La, Pr, Sm, Dy) Ceramics. Inorganic materials, 2004. 10(40): p. 1088-1090.
[19]. Ghosh, B., S. Halder and T.P. Sinha, Dielectric Relaxation and Collective Vibrational Modes of Double‐Perovskites A2SmTaO6 (A= Ba, Sr and Ca). Journal of the American Ceramic Society, 2014. 8(97): p. 2564-2572.
[20] Jiayi, Z., et al., Theoretical and experimental studies of Ba2SmTaO6 on crystal structure, electronic structure and optical properties. JOURNAL OF MATERIALS CHEMISTRY C, 2018. 6(7): p. 1806-1814.