[1] M.C. Ehmke, J. Glaum, M. Hoffman, J.E. Blendell, K.J. Bowman (2013) In situ X-ray diffraction of biased ferroelastic switching in tetragonal lead-free (1-x)Ba(Zr 0.2Ti 0.8) O3-x(Ba0.7Ca0.3)TiO3 piezoelectrics. J. Am. Ceram. Soc 2913:2920- 96 https://doi.org/10.1111/jace.12424
[2] D. Fu, M. Itoh, S.Y. Koshihara (2009) Dielectric, ferroelectric, and piezoelectric behaviors of AgNbO3 - KNbO3 solid solution. J. Appl. Phys 104104- 106. https://doi.org/10.1063/1.3259410
[3] Y. Yoneda, S. Kohara, H. Nagata, D. Fu, T. Takenaka (2014) Local Structure Analysis of Nb-related Perovskite Materials. Trans. Mat. Res. Soc Japan 455:458- 39. https://doi.org/10.14723/tmrsj.39.455
[4] G. Arlt, D. Hennings, G. De With (1985) Dielectric properties of fine-grained barium titanate ceramics. J. Appl. Phys 1619-58. https://doi.org/10.1063/1.3360251
[5] M. Acosta, N. Novak, V. Rojas, S. Patel, R. Vaish, J. Koruza, G.A. Rossetti, J. Rödel (2017) BaTiO3-based piezoelectrics: Fundamentals, current status, and perspectives. Appl. Phys. Rev 041305- 4. https://doi.org/10.1063/1.4990046
[6] L. Wang, W. Bai, X. Zhao, Y. Ding, S. Wu, P. Zheng, P. Li, J. Zhai (2020) Influences of rare earth site engineering on piezoelectric and electromechanical response of (Ba0.85Ca0.15) (Zr0.1Ti0.9)O3 lead-free ceramics. J Mater Sci: Mater Electron 31, 6560–6573. https://doi.org/10.1007/s10854-020-03212-1
[7] N. Jiang, L. Luo, F. Lei, Q. Zheng, C. Xu, J. Liao, D. Lin (2015) Enhanced piezoelectricity and photoluminescence in Dy-modified 0.94(Bi1−x Dy x )0.5Na0.5TiO3–0.06BaTiO3 lead-free multifunctional ceramics. J Mater Sci: Mater Electron 26, 4981–4987. https://doi.org/10.1007/s10854-015-3010-7
[8] M. Zannen, A. Lahmar, B. Asbani, H. Khemakhem, M. El Marssi, Z. Kutnjak, M. Es Souni (2015) Electrocaloric effect and luminescence properties of lanthanide doped (Na1/2Bi1/2)TiO3 lead free materials. Appl. Phys. Lett 032905- 107. https://doi.org/10.1063/1.4927280
[9] P. Mishra, Sonia, P.Kumar(2012) Effect of sintering temperature on dielectric, piezoelectric and ferroelectric properties of BZT-BCT 50/50 ceramics. J. Alloy. Comp 210:215- 54. https://doi.org/10.1016/j.jallcom.2012.08.017
[10] V.S. Puli, D.K. Pradhan, B.C. Riggs, S. Adireddy, R.S. Katiyar, D.B. Chrisey (2014) Synthesis and characterization of lead-free ternary component BST–BCT–BZT ceramic capacitors. J. Adv. Dielect. 1450014- 4.https://doi.org/10.1142/S2010135X14500143
[11] D.A. Tuan, L.D. Vuong, V.T. Tung, N.N. Tuan, N.T. Duong(2018) Dielectric and ferroelectric characteristics of doped BZT-BCT ceramics sintered at low temperature. J. CERAM. Process RES 32:36- 19.
[12] M. Davis, M. Budimir, D. Damjanovic, N. Setter (2007) Rotator and extender ferroelectrics: Importance of the shear coefficient to the piezoelectric properties of domain-engineered crystals and ceramics. J. Appl. Phys 054112- 101. https://doi.org/10.1063/1.2653925
[13] W. Liu, X. Ren (2009) Large piezoelectric effect in Pb-free ceramics. Phys. Rev. Lett 257602- 103. https://doi.org/10.1103/PhysRevLett.103.257602
[14] D. Damjanovic, N. Klein, J. Li, V. Porokhonskyy(2010) What can be expected from lead-free piezoelectric materials?. Funct. Mater. Lett. 5:13- 3. https://doi.org/10.1142/S1793604710000919
[15] D. Xue, J. Gao, Y. Zhou, X. Ding, J. Sun, T. Lookman, X. Ren (2015) Phase transitions and phase diagram of Ba(Zr0.2Ti0.8)O3-x(Ba0.7Ca0.3)TiO3 Pb-free system by anelastic measurement. J. Appl. Phys 124107- 117. https://doi.org/10.1063/1.4916713
[16] D.S. Keeble, F. Benabdallah, P.A. Thomas, M. Maglione, J. Kreisel (2013) Revised structural phase diagram of (Ba0.7Ca0.3TiO3)-(BaZr0.2Ti0.8O3). Appl. Phys. Lett 092903-102. https://doi.org/10.1063/1.4793400
[17] Y. Xu (1991) Ferroelectric Materials and Their Application 2nd ed, North Holand.
[18] K. Chandramouli, P. Viswarupachary, R. Koduri (2009) Pyroelectric and d.c. resistivity studies of barium strontium cerium lithium sodium niobate ceramics Ceram. - Silikaty 15:19- 53.
[19] N. Shara Sowmya, A. Srinivas, P. Saravanan, K. Venu Gopal Reddy, S. V. Kamat, J. Paul Praveen, D. Das, G. Murugesan, S. Dinesh Kumar, V. Subramanian (2018) Studies on magnetoelectric coupling in lead-free [(0.5)BCT-(0.5)BZT]-NiFe2O4 laminated composites at low and EMR frequencies. J. Alloy Comp. 240:248- 743. https://doi.org/10.1016/j.jallcom.2018.01.402
[20] Z. Hanani, D. Mezzane, M. Amjoud, S. Fourcade, A.G. Razumnaya, I.A. Luk’yanchuk, M. Gouné(2019) Enhancement of dielectric properties of lead-free BCZT ferroelectric ceramics by grain size engineering. Superlattices Microstruct 109:117- 127. https://doi.org/10.1016/j.spmi.2018.03.004
[21] Y. Bai, A. Matousek, P. Tofel, V. Bijalwan, B. Nan, H. Hughes, T.W. Button(2015) (Ba,Ca)(Zr,Ti)O3 lead-free piezoelectric ceramics-The critical role of processing on properties. J. Eur. Ceram. Soc 3445:3456- 35. https://doi.org/10.1016/j.jeurceramsoc.2015.05.010
[22] H.L. Sun, Q.J. Zheng, Y. Wan, Y. Chen, X. Wu, K.W. Kwok, H.L.W. Chan, D.M. Lin (2015) Correlation of grain size, phase transition and piezoelectric properties in Ba0.85Ca0.15Ti0.90Zr0.10O3 ceramics. J Mater Sci Mater Electron 5270:5278- 26.
[23] Y. Tian, L. Wei, X. Chao, Z. Liu, Z. Yang (2013) Phase transition behavior and large piezoelectricity near the morphotropic phase boundary of lead-free (Ba0.85Ca0.15)(Zr 0.1Ti0.9)O3 ceramics J. Am. Ceram Soc 496:502- 96. 10.1111/jace.12049
[24] B. Li, J.E. Blendell, K.J. Bowman (2011) Temperature-dependent poling behavior of lead-free BZT-BCT piezoelectrics. J. Am. Ceram Soc 3192:3194- 94. 10.1111/j.1551-2916.2011.04758.x
[25] P. Sateesh, J. Omprakash, G.S. Kumar, G. Prasad (2015) Studies of phase transition and impedance behavior of Ba(Zr,Ti) O3 ceramics. J. Adv. Dielect 1550002-5. 10.1142/S2010135X15500022
[26] Q. Chi, G. Liu, C. Zhang, Y. Cui, X. Wang, Q. Lei (2018) Microstructure and dielectric properties of BZT-BCT/PVDF nanocomposites Results Phys. 391:396- 8. 10.1016/j.rinp.2017.12.052
[27] V.B. Shirokov, M. V. Talanov (2019) Phase transitions in Bi4Ti3O12. Acta Cryst. B. (2019) 978:986- 75. 10.1107/S2052520619011843
[28] K. Ramam, M. Lopez, K. Chandramouli (2009) Dielectric and piezoelectric studies of perovskite-tungsten bronze structured (1-x)PLZT-xPBBiN nanoceramic composites by high-energy mechanical activation technique. J. Alloy. Comp 211:216- 488. 10.1016/j.jallcom.2009.08.082
[29] R. Koduri, M. Lopez, C. Kemburu (2011) Structural and functional properties of (1 - X)PLZT-xPBLBiN nanoceramic composites by high-energy mechanical activation technique. J. Mater. Sci. Mater. Electron 437:443- 22. doi:10.1007/s10854-010-0156-1
[30] R. Koduri, M. Lopez, K. Chandramouli (2010) Dielectric and piezoelectric studies of perovskite-tungsten bronze structured (1 - X)[0.5PMN-0.5PZT]-xPBBiN nanoceramic composites by high-energy mechanical activation technique. J. Mater. Sci. Mater. Electron 932:938- 21. 10.1007/s10854-009-0020-3
[31] R. Hayati, M. Fayazi, H. Diargar, M. Kaveh, L. Tayebi (2020) Electrical and mechanical properties of BZT − xBCT lead-free piezoceramics. Int. J. Appl .Ceram. Technol 1891:1898- 17. 10.1111/ijac.13494
[32] K. Ramam, K.C. Mouli, M.J. Fornerod, A. Elena, S. Rebolledo, A. Yellapragada (2014) Core Shell Structured Multiferroic Nanocomposites for Smart Energy Harvesting: Electric Powering for Portable Electronic Devices. Int. J. Appl. Eng. Res 57:64- 14.
[33] V.S. Puli, D.K. Pradhan, B.C. Riggs, D.B. Chrisey, R.S. Katiyar, Investigations on structure, ferroelectric, piezoelectric and energy storage properties of barium calcium titanate (BCT) ceramics, J. Alloy. Comp. 584 (2014) 369–373. 10.1016/j.jallcom.2013.09.108
[34] K. Ramam, K. Chandramouli (2009) Dielectric and piezoelectric properties of combinatory effect of A-site isovalent and B-site acceptor doped PLZT ceramics. Ceram. Silikaty 189:194- 53.
[35] K. Ramam, M. Lopez (2006) Ferroelectric and piezoelectric properties of Ba modified lead zirconium titanate ceramics. J. Phys. D Appl. Phys. 4466:4471- 39. 10.1088/0022-3727/39/20/025
[36] K. Ramam, M. Lopez (2007) Effect of strontium doping on dielectric, ferroelectric and piezoelectric properties of PLZTN ceramics. Mat. Sci. Eng. B-Adv 41:47-145. 10.1016/j.mseb.2007.09.085
[37] Z. Wang, W. Li, R. Chu, J. Hao, Z. Xu, G. Li (2016) Strong luminescence and high piezoelectric properties in Pr-doped (Ba0.99Ca0.01)(Ti0.98Zr0.02)O3 multifunctional ceramics. J. Alloy. Comp 30:35- 689. 10.1016/j.jallcom.2016.07.307
[38] L. Wang, W. Bai, X. Zhao, Y. Ding, S. Wu, P. Zheng, P. Li, J. Zhai, Influences of rare earth site engineering on piezoelectric and electromechanical response of (Ba0.85Ca0.15) (Zr0.1Ti0.9)O3 lead-free ceramics, J. Mater. Sci. Mater. Electron. 31 (2020) 6560–6573. 10.1007/s10854-020-03212-1
[39] J. Shi, X. Lu, J. Shao, B. Fang, S. Zhang, Q. Du, J. Ding, X. Zhao, H. Luo (2017) Effects on structure and properties of BCZT lead-free piezoelectric ceramics by rare-earth doping. Ferroelectrics 197: 507- 186. 10.1080/00150193.2017.1283941
[40] A. Hamza, F. Benabdallah, I. Kallel, L. Seveyrat, L. Lebrun, H. Khemakhem (2018) Effect of rare-earth substitution on the electrical properties and Raman spectroscopy of BCTZ ceramics. J. Alloy. Comp 2523:2531- 735. 10.1016/j.jallcom.2017.11.351
[41] H. Bao, C. Zhou, D. Xue, J. Gao, X. Ren (2012) A modified lead-free piezoelectric BZT-xBCT system with higher Tc. J. Phys. D Appl. Phys 465401- 43. 10.1088/0022-3727/43/46/465401
[42] R. Koduri, M. Lopez (2008) Influence of Mn on dielectric and piezoelectric properties of A-site and B-site modified PLZT nano-ceramics for sensor and actuator applications. J. Mater. Sci. Mater. Electron 669:675- 19. 10.1007/s10854-007-9419-x
[43] K. Ramam, K. Chandramouli, P. Viswarupachary (2009) Alkali-lithium modification on rare-earth-neodymium-doped barium strontium sodium niobate ceramics for dielectric and pyroelectric properties. J. Alloy. Comp 574:578- 479. 10.1016/j.jallcom.2009.01.063
[44] K. Ramam, K. Chandramouli(2011) Dielectric and piezoelectric properties of rare-earth gadolinium modified lead lanthanum zirconium niobium titanate ceramics. Ceram. Int 979:984- 37. 10.1016/j.ceramint.2010.11.016
[45] K. Ramam, M. Lopez (2008) Dielectric, ferroelectric and piezoelectric studies of neodymium-modified PLZNT ceramics for sensor and actuator applications. J. Alloy. Comp 398:403- 466. http://dx.doi.org/10.1016/j.jallcom.2007.11.055
[46] C. Zhang, Q. Bin Liu, X.Q. Huang (2013) Effect of sintering temperature on microstructure and electrical properties of (Mn, Nb)-doped BZT-BCT ceramics. Adv. Mater. Res 59:62- 820. https://doi.org/10.4028/www.scientific.net/AMR.900.119
[47] J. Gao, D. Xue, Y. Wang, D. Wang, L. Zhang, H. Wu, S. Guo, H. Bao, C. Zhou, W. Liu, S. Hou, G. Xiao, X. Ren (2011) Microstructure basis for strong piezoelectricity in Pb-free Ba(Zr0.2Ti0.8)O3-(Ba0.7Ca0.3)TiO3 ceramics. Appl. Phys. Lett 092901- 99. https://doi.org/10.1063/1.3629784
[48] D.A. Tuan, V.T. Tung, T. Van Chuong, N.T. Tinh, N.T.M. Huong (2015) Structure, microstructure and dielectric properties of lead-free BCT-xBZT ceramics near the morphotropic phase boundary. Indian J. Pure Appl. Phys 2015- 53. http://hdl.handle.net/123456789/31600
[49] C.H. Zhang, Q.G. Chi, X.X. He, J.Q. Lin, Y. Chen, L.Z. Liu, Q.Q. Lei (2016) Microstructure and electric properties of Nb doping x(Ba0.7Ca0.3)TiO3-(1−x)Ba(Zr0.2Ti0.8)O3 ceramics. J. Alloy. Comp 936:940- 685. https://doi.org/10.1016/j.jallcom.2016.06.203
[50] A.R. Jayakrishnan, K. V. Alex, A. Thomas, J.P.B. Silva, K. Kamakshi, N. Dabra, K.C. Sekhar, J. Agostinho Moreira, M.J.M. Gomes (2019) Composition-dependent xBa(Zr0.2Ti0.8)O3-(1-x)(Ba0.7Ca0.3)TiO3 bulk ceramics for high energy storage applications. Ceram. Int 5808:5818- 45. https://doi.org/10.1016/j.jallcom.2016.06.203
[51] W. Li, J. Hao, W. Bai, Z. Xu, R. Chu, J. Zhai (2012) Enhancement of the temperature stabilities in yttrium doped (Ba0.99Ca0.01)(Ti0.98Zr0.02)O3 ceramics. J. Alloy. Comp 46:49- 531. 10.1016/j.jallcom.2012.03.110
[52] V.M. Goldschmidt (1926) Die Gesetze der Krystallochemie. Naturwissenschaften 477:485- 14. https://doi.org/10.1007/BF01507527.
[53] P.F. Zhou, B.P. Zhang, L. Zhao, L.F. Zhu (2015) Effect of LiF addition on phase structure and piezoelectric properties of (Ba,Ca)(Ti,Sn)O3 ceramics sintered at low temperature. Ceram. Int 4035:4041- 41. https://doi.org/10.1007/BF01507527
[54] S. Li, H. Nie, G. Wang, N. Liu, M. Zhou, F. Cao, X. Dong (2019) Novel AgNbO3-based lead-free ceramics featuring excellent pyroelectric properties for infrared detecting and energy-harvesting applications: Via antiferroelectric/ferroelectric phase-boundary design. J. Mater. Chem. C 4403:4414- 7. https://doi.org/10.1039/C9TC01014A
[55] A.N. Ahmed, H.M.M.A. Rashed (2017) Processing and characterization of calcined and sintered niobium doped barium titanate. Ferroelectrics 118:126- 506. https://doi.org/10.1080/00150193.2017.1282285
[56] H. Hughes, D.M. Iddles, I.M. Reaney (2001), Niobate-based microwave dielectrics suitable for third generation mobile phone base stations. App. Phys. Lett 2952- 79. https://doi.org/10.1063/1.1414296
[57] S. Bhaskar Reddy, K. Prasad Rao, M.S. Ramachandra Rao (2009) Effect of La substitution on the structural and dielectric properties of BaZr0.1Ti0.9O3 ceramics. J. Alloy. Comp. 692:696- 481.
[58] K. Chandramouli, G.S. Reddy, K. Ramam (2009) Dielectric and piezoelectric properties of cerium-modified lead barium niobate ceramics. J. Alloy. Comp 609:616- 469. https://doi.org/10.1016/j.jallcom.2008.02.022
[59] K. Ramam, M. Lopez (2008) Structural, dielectric and piezoelectric studies of (1-x)PLSZNT-xBaTiO3 ceramics. J. Alloy. Comp 446:451- 465. https://doi.org/10.1155/2013/125634
[60] A. Kaushal, S.M. Olhero, B. Singh, R. Zamiri, V. Saravanan, J.M.F. Ferreira (2014) Successful aqueous processing of a lead free 0.5Ba(Zr0.2Ti0.8)O3-0.5(Ba0.7Ca0.3)TiO3 piezoelectric material composition. RSC Adv 2699:27002- 4. https://doi.org/10.1039/C4RA03172E
[61] W. Li, Z. Xu, R. Chu, P. Fu, and G. Zang (2011) Temperature Stability in Dy-Doped (Ba0.99Ca0.01) (Ti0.98Zr0.02)O3 Lead-Free Ceramics with High Piezoelectric Coefficient. J. Am. Ceram. Soc 3181:3183- 94. https://doi.org/10.1111/j.1551-2916.2011.04744.x