Amatya BL, Soga K, Bourne-Webb PJ, Amis T and Laloui L (2012) Thermo-mechanical behaviour of energy piles, Géotechnique 62(6): 503–519, doi:10.1680/geot.10.P.116
ASTM (2010) D7608-10 Standard Test Method for Torsional Ring Shear Test to Determine Drained Fully Softened Shear Strength and Nonlinear Strength Envelope of Cohesive Soils (Using Normally Consolidated Specimen) for Slopes with No Preexisting Shear Surfaces, ASTM International.
Batenipour H, Alfaro M, Kurz D and Graham J (2014) Deformations and ground temperatures at a road embankment in northern Canada, Canadian Geotechnical Journal 51(3): 260-271, doi:10.1139/cgj-2012-0425
Bourne-Webb PJ, Amatya BL, Soga K, Amis T, Davidson C and Payne P (2009) Energy pile test at Lambeth College, London: geotechnical and thermodynamic aspects of pile response to heat cycles. Géotechnique 59(3): 237–248, doi:10.1680/geot.2009.59.3.237
Brandl H (2006) Energy foundations and other thermo-active ground structures, Géotechnique 56(2): 81-122, doi:10.1680/geot.2006.56.2.81
Dalla Santa G, Galgaro A, Tateo F and Cola S (2016) Modified compressibility of cohesive sediments induced by thermal anomalies due to a borehole heat exchanger, Engineering Geology 202: 143–152, doi:10.1016/j.enggeo.2016.01.011
de Groot M, Muniz M, de la Parra AR and Pardo de Santayana F (2015) Empirical analysis of skin friction under variations of temperature, Geotechnical Engineering for Infrastructure and Development: 2607-2612, doi:10.1680/ecsmge.60678.vol5.402
Di Donna A and Barla M (2016) The role of ground conditions on energy tunnels’ heat exchange, Environmental Geotechnics 3(4): 214-224, doi.org/10.1680/jenge.15.00030
Di Donna A, Ferrari A and Laloui L (2016) Experimental investigations of the soil–concrete interface: physical mechanisms, cyclic mobilization, and behaviour at different temperatures, Canadian Geotechnical Journal 53(4): 659-672, doi:10.1139/cgj-2015-0294
Di Donna A, Cecinato F, Loveridge F and Barla M (2017) Energy performance of diaphragm walls used as heat exchangers, ICE Geotechnical Engineering 170(3): 232-245, doi:10.1680/jgeen.16.00092
Dupray F, Li C and Laloui L (2013) THM coupling sensitivity analysis in geological nuclear waste storage, Engineering Geology 163: 113-121, doi:10.1016/j.enggeo.2013.05.019
Eid HT and Rabie KH (2016) Fully Softened Shear Strength for Soil Slope Stability Analyses, ASCE International Journal of Geomechanics 17(1), doi:10.1061/(ASCE)GM.1943-5622.0000651
Franzius JN and Pralle N (2011) Turning segmental tunnels into sources of renewable energy, Proc. of ICE - Civil Engineering 164(1): 35–40, doi:10.1680/cien.2011.164.1.35
Graham J, Tanaka N, Crilly T and Alfaro (2001) Modified Cam-Clay modelling of temperature effects in clays, Canadian Geotechnical Journal 38(3): 608-621, doi:10.1139/t00-125
Head KH and Epps R (2011) Manual of soil laboratory testing. Volume 2: Permeability, Shear Strength and Compressibility Tests 3rd Edition, Whittles Publishing, Dunbeath Mill, Scotland.
Hueckel T, Francois B and Laloui L (2009) Explaining thermal failure in saturated clays, Géotechnique 59(3): 197–212, doi:10.1680/geot.2009.59.3.197
Kroener E, Vallati A and Bittelli M (2014) Numerical simulation of coupled heat, liquid water and water vapor in soils for heat dissipation of underground electrical power cables, Applied Thermal Engineering 70: 510-523, doi:10.1016/j.applthermaleng.2014.05.033
Loveridge F and Powrie W (2012) Pile heat exchangers: thermal behavior and interactions, ICE Geotechnical Engineering 66(2): 178-196, doi:10.1680/geng.11.00042
Murphy KD and McCartney JS (2014) Thermal borehole shear device, Geotechnical Testing Journal 37(6): 1040-1055, doi:10.1520/GTJ20140009
Ng CWW and Zhou C (2014) Cyclic behavior of an unsaturated silt at various suctions and temperatures, Géotechnique 64(9): 709-720, doi:10.1680/geot.14.P.015
Ng CWW, Mu QY and Zhou C (2017) Effects of soil structure on the shear behavior of an unsaturated loess at different suctions and temperatures, Canadian Geotechnical Journal 54(2): 270-279, doi:10.1139/cgj-2016-0272
Ocłoń P, Cisek P, Pilarczyk M and Taler D (2015) Numerical simulation of heat dissipation processes in underground power cable system situated in thermal backfill and buried in a multilayered soil, Energy Conversion and Management 95: 352-370, doi:10.1016/j.enconman.2015.01.092
PCB Heaven (2009) Peltier Elements Explained. Available from pcbheaven.com/wikipages/The_Peltier_Thermo-Element [accessed 12 March 2018]
Pei L, Ruhaak W, Stegner J, Bar K, Homuth S, Mielke P and Sass I (2015) Thermo-triax: an apparatus for testing petrophysical properties of rocks under simulated geothermal reservoir conditions, Geotechnical Testing Journal 38(1): 119-138, doi:10.1520/GTJ20140056
Pinyol NM, Alvarado M, Alonso EE and Zabala F (2018) Thermal effects in landslide mobility, Géotechnique 68(6): 528-545, doi:10.1680/jgeot.17.P.054
Sterpi D, Coletto A and Mauri L (2017) Investigation on the behaviour of a thermo-active diaphragm wall by thermo-mechanical analyses, Geomechanics for Energy and the Environment 9: 1-20, doi:10.1016/j.gete.2016.10.001
Subramanian SS, Ishikawa T and Tokoro T (2017) Stability assessment approach for soil slopes in seasonal cold regions, Engineering Geology 221: 154-169, doi:10.1016/j.enggeo.2017.03.008
Tanaka N, Graham J and Crilly T (1997) Stress-strain behavior of reconstituted illitic clay at different temperatures, Engineering Geology 47(4): 339-350, doi:10.1016/S0013-7952(96)00113-5
Tsutsumi A and Tanaka H (2012) Combined effects of strain rate and temperature on consolidation behavior of clayey soils, Soils and Foundations 52(2): 207-215, doi:10.1016/j.sandf.2012.02.001
Yavari N, Tang AM, Pereira JM and Hassen G (2016) Effect of temperature on the shear strength of soils and soil/structure interface, Canadian Geotechnical Journal 53(7): 1186-1194, doi:10.1139/cgj-2015-0355