The proposed machine has been of great interest in variable speed wind turbine generators due to the high efficiency of energy production (power) and low torque pulses And they are used in the hybrid car, also the most important advantages of the interior permanent magnet machine which made it necessary to conduct research on this machine are:
• High efficiency
• Long life and high reliability
• High power density
• High resistance to demagnetization
• Robust and simple structure
• Low manufacturing cost due to small volume
Structures with two stators or two rotors or two stators and two rotors are so popular due to receiving energy from two sides and have high usage in industry [1]. Figure 1 shows a magnetic gearbox for a hybrid car. The researched machine for use in a hybrid car is installed in such a way that its outer rotor is connected to the ring gear and its inner rotor is connected to the sun gear, which causes the required torque to be transferred to the wheels at the desired speed. Another application of this car is in wind turbines in Fig. 1, which have the ability to produce energy simultaneously from two turbines. Figure 2 shows the placement of this type of machine for use in this system and permanent magnet switched flux machines with 2-way structure, which are shown in Fig. 3, Fig. 4, Fig. 5 and Fig. 6.
Many works have been done so far that in [7], two linear permanent magnet machines with two moving parts with different windings are used to calculate the quantities of induced voltage, thrust force, power pulses, vertical force and copper losses with the help of finite element method. In [8], a new structure from the point of view of winding (winding is a complete step and the magnets are located on the stator teeth) has been proposed for the permanent magnet machine and with the conventional structure in the torque quantities. In [9], the effect of current density, number of winding turns and slot space for winding on the torque of permanent magnet machine is investigated and the relationship between the torque and the outer radius of the rotor on the four permanent magnet machines is checked with the help of the finite element method. In [10], two examples of permanent magnet machine without stator yoke and two rotors have been proposed, and the effect of the number of poles and optimization variables on torque, torque pulses and machine speed has been seen, and the torque quantities, pulses Torque, induced voltage are calculated with the help of finite element method. In [11], a permanent magnet machine without bearing with combined winding is proposed and in two different structures in terms of the number of rotor and stator poles, a comparison between the quantity torque, magnetic flux density, iron and copper losses and suspension force are performed by considering the saturation limit and with the help of the finite element method. In [12], with the help of frozen permeability method and finite element method, a quantitative comparison is made between two single-stator and two-stator structures of the permanent magnet machine by considering saturation. After the superiority of the structure of two stators, a comparison is made between this structure with an internal magnet permanent magnet machine and a synchronous reluctance motor with a high permeability core, and the quantities of torque, link flux in different currents are calculated. [13] For the permanent magnet machine for different structures, the amount of torque, suspension force, induced voltage, induced voltage harmonics and link flux are calculated with the help of the finite element method. In [14] two rotor permanent magnet switched flux machine with two designs Different types of stator winding are suggested (two types of centralized winding, parallel and series with magnets) and these two designs in terms of average torque quantities, torque pulses, flux distribution, induced voltage, link flux, torque ratio They are compared to the size of the magnet and the efficiency, and they are compared with the single stator, single rotor switched flux machine of the internal rotor type. In [15], the external rotor permanent magnet flux-switched machine with concentrated-fractional winding is proposed and the quantities of torque, output power, induced voltage, induced voltage harmonics and link flux are calculated with the help of finite element method. In [16], the new structure of permanent magnet machine with two-stator is modeled with the help of finite element method and quantities of power pulses, average power, inductance, induced voltage and induced voltage harmonics are extracted. In [17], two single-phase permanent magnet two-stator axial flux machine is investigated in two models, in the first model, the two stators are completely matched, but in the second model, they have a spatial difference of 180 electrical degrees, and the analyzes are performed. Also, in order to increase the self-starting torque, the asymmetry in the air gap is done by cutting a part of the rotor, and finally, the quantities of link flux, induced voltage, tooth torque, average torque, self-starting torque are calculated with the help of the finite element method. they become In [18], a new structure for permanent magnet machine is proposed and with the conventional structure in the quantities of linked flux, induced voltage, induced voltage harmonics, tooth torque, average torque, core losses, eddy current losses in the magnet at speed different types, distribution of flux density in different points of the magnet are compared in terms of demagnetization in the magnet and output power. In [19], two different structures of permanent magnet flux-switched machine with two moving parts, from the point of view of the teeth of the moving part (with and without teeth) - gear) is taken into account and a comparison between the two is made by the finite element method between the average quantities of force, gear force and induced voltage. In [20], the four structures of the permanent magnet two-stator and two-rotor machine (the location of the winding and magnet in the four structures are different, so that in one structure, the magnet and the armature winding are both on the stator, and in the other, the magnet is in The external stator and the winding in the internal stator, as well as the location of the stator and rotor in different structures and the number of stator and rotor teeth are also different) and from the point of view of the quantities of induced voltage, harmonics, tooth torque, efficiency which are extracted from the finite element model and compared with the internal magnet machine. In [21], the goal is to reduce the temperature throughout the machine and reduce the eddy current losses for the permanent magnet square-switched machine. For this purpose, two different types of non-magnetic materials are used in the rotor and their effects are compared with each other. And the quantities of temperature in different parts, torque, core losses are calculated by finite element method and thermal analysis. In [22], the permanent magnet machine is studied and with the help of the finite element method, the quantities of induced voltage, tooth torque are calculated. Combined winding (permanent magnet, armature winding and excitation current winding) has been done and its zero-dimensional, two-dimensional and three-dimensional models are extracted and average torque quantities, torque pulses, torque Tooth and losses are obtained by considering saturation and demagnetization. [23] The structure of three permanent magnet machines that are different in terms of magnet placement (three different structures where the magnet is placed only on the stator, on the rotor, and on both the stator and the rotor) and has 12 stator poles for the pole are studied and different quantities of average torque, torque pulses, induced voltage and tooth torque are calculated by considering decay effect, end effect and unsaturated core with the help of finite element method and analytical model. In [24], a new structure for the permanent magnet machine with one moving part and two stators is introduced, whose stator has a back yoke of the stabilizing part, and this new structure with a linear induction machine with two stators and one moving part is quantitatively Induced voltage, thrust force, tooth force, losses and flux density are compared, and the quantities are calculated with the help of finite element method. In [25], the permanent magnet machine with stacked structure is studied and a comparison is made between different structures from the point of view of winding, and the desired quantities are average torque, torque pulses, induced voltage, harmonics. and the radial force for each structure are checked separately by the finite element method. In [26], the permanent magnet linear machine with the additional iron part to the stator is checked and the quantities of tooth force, force pulses, average force, distribution of flux density, induced voltage is calculated with the help of finite element method. In [27], a new structure of permanent magnet machine is proposed. In [28], there are three structures of permanent magnet machine with combined winding (in the first two structures, there are two stators in the inner stator of the magnet and the winding of the excitation current and the winding of the primary armature, and in the outer stator of the armature winding are secondary and in the third structure there is primary armature and magnet winding in the inner stator, and magnet and secondary armature winding and excitation current winding in the outer stator) are discussed and compared with each other. In this analysis, magnet magnetization curve is seen and the change of its working point is also considered. First, the two-dimensional analysis of the structures is performed, and after that, the finite element model is extracted and compared with each other from the perspective of flux quantities, air gap, induced voltage, harmonics, torque, iron losses in relation to speed changes, in the states of weakening and strengthening the flux. are compared. It should be mentioned that the magnetic equivalent circuit is extracted in this study for three structures in order to show the regulation. In [29], a permanent magnet machine with combined winding is designed to be used in a wind turbine, and then From the extraction of the analytical model with the finite element model, the quantities of the magnetic field in the air gap caused by the excitation current and armature current, link flux, torque, efficiency, output voltage, output power are compared under different working conditions. This structure has two working modes, series and parallel, for the winding of the excitation current field so that it can supply the output voltage (series) and remove the mutual inductance (parallel).In [30], a new structure for permanent magnet machine is introduced, where the stator is located outside of the two inner rotors (two rotors, one rotor without winding and the other with magnets and armature winding) and the thermal analysis is based on the new structure and the conventional structure of the permanent magnet flux-switched machine, it is performed at different speeds, and the quantities of flux density in different parts, core losses, copper losses, and efficiency are calculated with the help of thermal model and finite element method. In [31], the optimal design of a permanent magnet linear machine is carried out for the purpose of high throwing force and low cost. In [32], a dynamic model of a permanent magnet machine with double armature winding is proposed, and the effects of changing the air gap and magnetic saturation are investigated with the finite element method. In [33], a permanent magnet machine with two stators is designed and optimized from the point of view of the type of winding, and in [34] a new magnetic circuit model for permanent magnet machine is proposed.
In this paper, 2 dimensional model used to solve the problem is a novel method for spoke type permanent magnet machines that is so fast and accurate to be very acceptable substitution method for FEA.