Antosik AK, Czech Z, Bednarczyk P (2015) Self-adhesive labels dispersible in water – preparation and measurement. Elastomery 19:18-21. doi: n.a.
Assaad E, Mateescu MA (2010) The influence of protonation ratio on properties of carboxymethyl starch excipient at various substitution degrees: Structural insight and drug release kinetics. Int J Pharmac 394:75-84. https://doi.org/10.1016/j.ijpharm.2010.04.037
Ayed EB, Magnin A, Putaux JL, Boufi S (2020) Vinyltriethoxysilane-functionalized starch nanocrystals as Pickering stabilizer in emulsion polymerization of acrylic monomers. Application in nanocomposites and pressure-sensitive adhesives. J Colloid Interface Sci 578:533-546.https://doi.org/10.1016/j.jcis.2020.05.011
Bilba K, Arsene MA (2008) Silane treatment of bagasse fiber for reinforcement of cementitious composites. Compos Part A 39:1488–1495. https://doi.org/10.1016/j.compositesa.2008.05.013
Biswas A, Willet JL, Gordon SH, Finkenstadt VL, Cheng HN (2006) Complexation and blending of starch, poly(acrylic acid), and poly(N-vinyl pyrrolidone). Carbohydr Polym 65:397-403. https://doi.org/10.1016/j.carbpol.2006.01.035
Czech Z (2003) Crosslinking of pressure sensitive adhesive based on water-borne acrylate. Polym Int 52: 347-357. https://doi.org/10.1002/pi.1151
Czech Z (2005) Synthesis of new solvent-borne acrylic pressure-sensitive adhesives with low shrinkage. Polimery (Warsaw) 50:831-838. https://doi.org/10.14314/polimery.2005.831
Czech Z, Malec A (2006) Synthesis and application of water-borne pressure-sensitive acrylic adhesives. Przemysł Chemiczny 11:1488-1494. Doi: n.a.
Gueyne J, Seguin MC (1993) Silanol condensation products, their preparation and applications. EP0295983B1
Hubbe MA, Gill RA (2016) Fillers for papermaking: A review of their properties, usage practices, and their mechanistic role. Bioresources 11:2886-2963. https://doi.org/10.15376/biores.11.1.2886-2963
Jensen ACS, Imberti S, Parker SF, Schneck E, Politi Y, Fratzl P, Bertinetti L, Habraken WJEM (2018) Hydrogen bonding in amorphous calcium carbonate and molecular reorientation induced by dehydration. J Phys Chem C 122:3591−3598. https://doi.org/10.1021/acs.jpcc.7b10459
Kaczmarska K, Grabowska B, Bobrowski A, Cukrowicz S (2018) Effects of curing conditions on the structure of sodium carboxymethylstarch/mineral matrix system: FT-IR investigation. Spectrochim Acta Part A 201:236–241. https://doi.org/10.1016/j.saa.2018.04.049
Kessel H (1985) Bestimmung der funktionellen gruppe und des durchschnittlichen substitutionsgrades von carboxymethylstärke. Starch 37:334–336. https://doi.org/10.1002/star.19850371005
Krisnandi YK, Parmanti IY, Yunarti RT, Sihombing R, Saragi IR (2018) Synthesis and characterization of zeolite NaY from kaolin Bangka Belitung with variation of synthesis composition and crystallization time. J Phys: Conf Series 1095:012043. https://doi.org/10.1088/1742-6596/1095/1/012043
Li W, Wu Y, Xu Z, Ni Q, Xing J, Tao X (2020) Blending caproylated starch with poly(acrylic acid)-g-protein-g-poly (methyl acrylate) as an adhesive material to improve the adhesion of starch to PLA fibers. Int J Adhes Adhes 102:102668. https://doi.org/10.1016/j.ijadhadh.2020.102668
Munawaroh F, Muharrami LK, Triwikantoro, Arifin Z (2018) Synthesis and characterization of precipitated CaCO3 from ankerite prepared by bubbling method, KnE Eng 2019:98–104. https://doi.org/10.18502/keg.v1i2.4435
Paul CW (2011) Pressure-sensitive adhesives (PSAs). In: da Silva LFM, Öchsner A, Adams RD (eds) Handbook of Adhesion Technology, Springer-Verlag Berlin Heidelberg, Heidelberg, pp 341-372
Silva E Silva M, Lages AS, Santana GP (2017) Physical and chemical study of lattice kaolinites and their interaction with orthophosphate. An Acad Bras Ciên 89:1391-1401. http://dx.doi.org/10.1590/0001-3765201720160519
Spychaj T, Wilpiszewska K, Zdanowicz M (2013) Medium and high substituted carboxymethyl starch: Synthesis, characterization and application. Starch 65:22-33. https://doi.org/10.1002/star.201200159
Wilpiszewska K, Antosik AK, Spychaj T (2015) Novel hydrophilic carboxymethyl starch/montmorillonite nanocomposite films. Carbohydr Polym 128:82-89. https://doi.org/10.1016/j.carbpol.2015.04.023
Wilpiszewska K, Czech Z (2018) Water-soluble pressure-sensitive adhesives containing carboxymethyl starch with improved adhesion to paper. J Polym Environ 26:1453–1458. https://doi.org/10.1007/s10924-017-1048-8
Zia-ud-Din, Chen L, Ullah I, Wang PK, Javaid AB, Hua C, Zhang M, Ahamd I, Xiong X, Wang Z (2018) Synthesis and characterization of starch-g-poly(vinyl acetate-co-butyl acrylate) bio-based adhesive for wood application. Int J Biol Macromol 114:1186-1193. https://doi.org/10.1016/j.ijbiomac.2018.03.178
Zhang Y, Cunningham MF, Dubé MA (2020) Modification of adhesive and latex properties for starch nanoparticle-based pressure sensitive adhesives. Macromol React Eng 14:1900023. https://doi.org/10.1002/mren.201900023
Zhang Y, Cunningham MF, Smeets NMB, Dubé MA (2018) Starch nanoparticle incorporation in latex-based adhesives. Eur Polym J 106:128-138. https://doi.org/10.1016/j.eurpolymj.2018.07.014
Zhao D, Wan Y (2007) The synthesis of mesoporous molecular sieves. In: Čejka J, van Bekkum H, Corma A, Schüth F (eds) Studies in Surface Science and Catalysis, Elsevier B.V., pp 241-300. https://doi.org/10.1016/S0167-2991(07)80796-8