Akesson U, Hansson J, Stigh J (2004) Characterization of microcracks in the Bohus granite, western Sweden, caused by uniaxial cyclic loading. Eng Geol 72:131–142.
Bahaaddini M, Sharrock G, Hebblewhite BK (2013) Numerical investigation of the effect of joint geometrical parameters on the mechanical properties of a non-persistent jointed rock mass under uniaxial compression. Comput Geotech 49:206–225.
Basu A (2006) Mechanical characterization of granitic rocks of Hong Kong by improved index testing procedures with reference to weathering induced microstructural changes. PhD thesis. The University of Hong Kong.
Basu A, Aydin A (2006) Predicting uniaxial compressive strength by point load test: significance of cone penetration. Rock Mech Rock Eng 39:483–490.
Basu A, Celestino TB, Bortolucci AA (2009) Evaluation of rock mechanical behaviors under uniaxial compression with reference to assessed weathering grades. Rock Mech Rock Eng 42:73-93.
Basu A, Mishra DA, Roychowdhury K (2013) Rock failure modes under uniaxial compression, Brazilian, and point load tests. Bull Eng Geol Environ 72:457–475.
Bieniawski ZT (1984) Rock mechanics design in mining and tunneling. AA Balkema, Rotterdam.
Bieniawski ZT (1975) The point load test in geotechnical practice. Eng. Geol., 9(1), 1–11.
Chadwick B, Vasudev VN, Hedge GV (2003) The Chitradurga schist belt and its adjacent plutonic rocks NW of Tungabhadra, Karnataka: a duplex in the late Archean convergent setting of the Dharwar craton. J Geol Soc India 61:611–613.
Chakrabarti C, Mallick BS, Pyne TK, Guha D (2006) A Manual of the Geology of India, Geological Survey of India, Kolkata.
Diamantis K, Gartzos E, Migiros G (2009) Study on uniaxial compressive strength, point load strength index, dynamic and physical properties of serpentinites from Central Greece: test results and empirical relations. Eng Geol 108: 199–207.
Debecker B, Vervoort A (2009) Experimental observation of fracture patterns in layered slate. Int J fract 159:51-62.
Du Y, Li T, Li W, Ren Y, Wang G, He P (2020) Experimental study of mechanical and permeability behaviors during the failure of sandstone containing two pre-existing fissures under triaxial compression. Rock Mech Rock Eng 53, 3673–3697.
Eberhardt E, Stead D, Stimpson B, Read RS (1998) Identifying crack initiation and propagation thresholds in brittle rock. Ca Geotech J 35:222–233.
Hudyma N, Avar BB, Karakouzian M (2004) Compressive strength and failure modes of lithophysae-rich Topopah Spring Tuff specimens and analog models containing cavities. Eng Geol 73:179–190.
ISRM (2014) The ISRM suggested methods for rock characterization, testing and monitoring: 2007–2014. Springer
ISRM (2007) The complete ISRM suggested methods for rock characterization, testing and monitoring: 1974–2006. In: Ulusay R, Hudson JA (eds) Suggested methods prepared by the commission of testing methods, ISRM, compilation arranged by the ISRM Turkish national group, Kozan Ofset, Ankara.
Jaeger JC, Cook NGW, Zimmerman RW (2007) Fundamentals of rock mechanics, 4th edition. Blackwell, Oxford.
Jaeger JC, Cook NGW (1979) Fundamentals of rock mechanics, 3rd edition. Chapman & Hall, London
Janeiro RP, Einstein HH (2010) Experimental study of the cracking behaviour of specimens containing inclusions (under uniaxial compression). Int. J. Fract. 164:83-102.
Jayananda M, Chardon D, Peucat JJ, Capdevila R (2006) 2.61 Gapotassic granites and crustal reworking in the western Dharwar craton, southern India: tectonic, geochronologic and geochemical constraints. Precambrian Res 150:1–26.
Khanlari GR, Heidari M, Sepahigero AA, Fereidooni D (2014) Quantification of strength anisotropy of metamorphic rocks of the Hamedan province, Iran, as determined from cylindrical punch, point load and Brazilian tests. Eng Geol 169: 80–90.
Kim KY, Zhuang L, Yang H, Kim H, Min KB (2016) Strength anisotropy of Berea sandstone: results of X-ray computed tomography, compression tests, and discrete modeling. Rock Mech Rock Eng 49:1201-1210.
Klein E, Baud P, Reuschle T, Wong TF (2001) Mechanical behavior and failure mode of Bensteim sandstone under triaxial compression. Phys Chem Earth (A) 26:21–25.
Lee H, Jeon S (2011) An experimental and numerical study of fracture coalescence in pre-cracked specimens under uniaxial compression. International Journal of Solids and Structures 48(6):979-999.
Li L, Lee PKK, Tsui Y, Tham LG, Tang CA (2003) Failure process of granite. Int J Geomeh 3:84–98.
Li D, LNY Wong (2013) Point load test on meta-sedimentary rocks and correlation to UCS and BTS. Rock Mech. Rock Eng. 46: 889–896.
Liu Q, Y Zhao, X Zhang (2019) Case study: Using the point load test to estimate rock strength of tunnels constructed by a tunnel boring machine. Bull. Eng. Geol. Environ. 78: 1727–1734.
Maji VB (2011) Understanding failure mode in uniaxial and triaxial compression for a hard brittle rock. In: Proceedings of the 12th ISRM international congress on rock mechanics. CRC Press/Balkema, Leiden; p. 723–726.
Martin CD, Chandler NA (1994) The progressive fracture of Lac du Bonnet granite. Int J Rock Mech Min Sci Geomech Abstr 31:643–659.
Masoumi H, Roshan H, Hedayat A, Hagan PC (2018) Scale-size dependency of intact rock under point-load and indirect tensile Brazilian testing. Int J Geomech, 18: 04018006.
Naqvi SM, Rogers JJW (1987) Precambrian geology of India. Oxford University press.
Peng S, Johnson AM (1972) Crack growth and faulting in cylindrical specimen of chemsford granite. Int J Rock Mech Min Sci, Geomech Abstr 9:37–86.
Russell AR, Muir Wood D (2009) Point load tests and strength measurements for brittle spheres. Int. J. Rock Mech. Min. Sci., 46(2), 272–280.
Santarelli FJ, Brown ET (1989) Failure of three sedimentary rocks in triaxial and hollow cylinder compression tests. Int J Rock Mech Min Sci, Geomech Abstr 26:401–413.
Saroglou G (2004) The anisotropic nature of selected metamorphic rocks from Greece. J S Afr Inst Min Metall 104: 217–222.
Scholz C (1968) Experimental study of the fracturing process in brittle rock. J Geophys Res 73:1447–1454.
Szwedzicki TA (2007) A hypothesis on modes of failure of rock samples tested in uniaxial compression. Technical note. Rock Mech Rock Eng 40:97–104.
Tavallali A, Vervoort A (2010) Effect of layer orientation on the failure of layered sandstone under Brazilian test conditions. Int J Rock Mech Min Sci 47:313–322.
Tien YM, Kuo MC (2001) A failure criterion for transversely isotropic rocks. Int J Rock Mech Min Sci 38: 399-412.
Tsidzi, KEN (1990) The influence of foliation on point load strength anisotropy of foliated rocks. Eng Geol, 29: 49–58.
Vishnu CS, Lahiri S, Mamtani MA (2018) The relationship between magnetic anisotropy, rock-strength anisotropy and vein emplacement in gold-bearing metabasalts of Gadag (South India). Tectonophy 722:286–298.
Vishnu CS, Mamtani MA, Basu A (2010) AMS, ultrasonic P-wave velocity and rock strength analysis in quartzites devoid of mesoscopic foliations-implications for rock mechanics studies. Tectonophy 494(3):191–200.
Xue Y, Kong F, Li S, Zhang L, Zhou B, Li G, Gong H (2020) Using Indirect Testing Methods to Quickly Acquire the Rock Strength and Rock Mass Classification in Tunnel Engineering. Int J Geomech 20:.05020001.
Yang SQ, Jiang YZ, Xu WY, Chen XQ (2008) Experimental investigation on strength and failure behaviour of pre-cracked marble under conventional triaxial compression. Int J of Solid Str 45: 4796–4819.
Yin JH., Wong RH., Chau KT., Lai DT. and Zhao, GS. 2017. Point load strength index of granitic irregular lumps: Size correction and correlation with uniaxial compressive strength. Tunn Underg Space Tech, 70: .388-399.
Zhou XP, Cheng H, Feng YF (2014) An Experimental Study of Crack Coalescence Behavior in Rock-Like Materials Containing Multiple Flaws Under Uniaxial Compression. Rock Mech Rock Eng 47:1961–1986.