[1] Barrett ME, Irish LB, Malina JF, Charbeneau RJ (1998) Characterization of Highway Runoff in Austin, Texas, Area. J Environ Eng 124(2):131–139.
https://10.1061/(asce)0733-9372(1998)124:2(131)
[2] Tennis PD, Leming ML, Akers DJ (2004) Pervious concrete pavements. PCA Serial No. 2828. Skokie, IL: Portland Cement Association.
[3] Shi X (2020) More than smart pavements: connected infrastructure paves the way for enhanced winter safety and mobility on highways. J Infrastruct Preserv Resil 1(1):1-12.
https://doi.org/10.1186/s43065-020-00014-x
[4] Wang W, Wang L, Miao Y, Cheng C, Chen S (2020) A survey on the influence of intense rainfall induced by climate warming on operation safety and service life of urban asphalt pavement. J Infrastruct Preserv Resil 1(1):1-14.
https://doi.org/10.1186/s43065-020-00003-0
[5] Wang T, Ma X, Li H, Dong Z (2021) Analysis methodology and assessment indices of vulnerability for asphalt pavement in cold regions. J Infrastruct Preserv Resil 2(11):1-14
https://doi.org/10.1186/s43065-021-00028-z
[6] Torres A, Gaedicke C, Hu J, Bejugam R, McMasters S (2018) Comparing Design Void Content with Actual Void Content of Laboratory Prepared Pervious Concrete. Mater Sci Appl 9(07):596–613.
https://doi.org/10.4236/msa.2018.97043
[7] Xie X, Zhang T, Yang Y, Lin Z, Wei J, Yu Q (2018) Maximum paste coating thickness without voids clogging of pervious concrete and its relationship to the rheological properties of cement paste. Constr Build Mater 168, 732-746.
https://doi.org/10.1016/j.conbuildmat.2018.02.128
[8] Bright Singh S, Murugan M (2020) Effect of aggregate size on properties of polypropylene and glass fibre-reinforced pervious concrete. Int J Pavement Eng 1-15.
https://doi.org/10.1080/10298436.2020.1836562
[9] Cole L, Bakheet R, Akib S (2020) Influence of Using Waste Plastic and/or Recycled Rubber as Coarse Aggregates on the Performance of Pervious Concrete. Eng 1(2):153-166.
https://doi.org/10.3390/eng1020010
[10] Zhang K, Kevern J (2021) Review of porous asphalt pavements in cold regions: the state of practice and case study repository in design, construction, and maintenance. J Infrastruct Preserv Resil, 2(1):1-17.
https://doi.org/10.1186/s43065-021-00017-2
[11] Haselbach L, Freeman R (2006) Vertical porosity distributions in pervious concrete pavement. ACI Mater J 103(6):452-458.
[12] Kevern JT, Wang K, Schaefer VR (2010) Effect of coarse aggregate on the freeze-thaw durability of pervious concrete. J Mater Civil Eng 22(5):469-475.
https://doi.org/10.1061/(ASCE)MT.1943-5533.0000049
[13] Liu H, Luo G, Wei H, Yu H (2018) Strength, permeability, and freeze-thaw durability of pervious concrete with different aggregate sizes, porosities, and water-binder ratios. Appl Sci 8(8):1217.
https://doi.org/10.3390/app8081217
[14] Montes F, Valavala S, Haselbach LM (2005) A new test method for porosity measurements of portland cement pervious concrete. J ASTM Int 2(1):1-13.
[15] Deo O, Neithalath N (2011) Compressive response of pervious concretes proportioned for desired porosities. Constr Build Mater, 25(11):4181-4189.
https://doi.org/10.1016/j.conbuildmat.2011.04.055
[16] Martin III WD, Kaye NB, Putman BJ (2014) Impact of vertical porosity distribution on the permeability of pervious concrete. Constr Build Mater 59:78-84.
https://doi.org/10.1016/j.conbuildmat.2014.02.034
[17] Yu F, Sun D, Hu M, Wang J (2019) Study on the pores characteristics and permeability simulation of pervious concrete based on 2D/3D CT images. Constr Build Mater 200:687-702.
https://doi.org/10.1016/j.conbuildmat.2018.12.135
[18] da Costa FBP, Haselbach LM, da Silva Filho LCP (2021) Pervious concrete for desired porosity: Influence of w/c ratio and a rheology-modifying admixture. Constr Build Mater 268:121084.
https://doi.org/10.1016/j.conbuildmat.2020.121084
[19] Huang B, Wu H, Shu X, Burdette EG (2010) Laboratory evaluation of permeability and strength of polymer-modified pervious concrete. Constr Build Mater 24(5):818-823.
https://doi.org/10.1016/j.conbuildmat.2009.10.025
[20] Kayhanian M, Anderson D, Harvey JT, Jones D, Muhunthan B (2012) Permeability measurement and scan imaging to assess clogging of pervious concrete pavements in parking lots. J Environ Manage 95(1):114-123.
https://doi.org/10.1016/j.jenvman.2011.09.021
[21] Xie X, Zhang T, Wang C, Yang Y, Bogush A, Khayrulina E, Huang Z, Wei J, Yu Q (2020) Mixture proportion design of pervious concrete based on the relationships between fundamental properties and skeleton structures. Cem Concr Compos 113:103693.
https://doi.org/10.1016/j.cemconcomp.2020.103693
[22] Haselbach LM, Valavala S, Montes F (2006) Permeability predictions for sand-clogged Portland cement pervious concrete pavement systems. J Environ Manage 81(1):42-49.
https://doi.org/10.1016/j.jenvman.2005.09.019
[23] Pieralisi R, Cavalaro SHP, Aguado A (2017) Advanced numerical assessment of the permeability of pervious concrete. Cem Concr Res 102:149-160.
https://doi.org/10.1016/j.cemconres.2017.09.009
[24] Hatanaka S, Kamalova Z, Harada M (2019) Construction of a nonlinear permeability model of pervious concrete and drainage simulation of heavy rain in a residential area. Results Mater 3:100033.
https://doi.org/10.1016/j.rinma.2019.100033
[25] Zhang Y, Li H, Abdelhady A, Yang J (2020) Comparative laboratory measurement of pervious concrete permeability using constant-head and falling-head permeameter methods. Constr Build Mater 263:120614.
https://doi.org/10.1016/j.conbuildmat.2020.120614
[26] Ong GP, Jagadeesh A, Su YM (2020) Effect of pore network characteristics on non-Darcy permeability of pervious concrete mixture. Constr Build Mater 259:119859.
https://doi.org/10.1016/j.conbuildmat.2020.119859
[27] Shan J, Feng S, Li F, Wu S (2021) Lateral permeability of pervious asphalt mixtures and the influence of clogging. Constr Build Mater 273:121988.
https://doi.org/10.1016/j.conbuildmat.2020.121988
[28] Chen Y, Wang K, Wang X, Zhou W (2013) Strength, fracture and fatigue of pervious concrete. Constr Build Mater 42:97-104.
https://doi.org/10.1016/j.conbuildmat.2013.01.006
[29] Zhong R, Wille K (2016) Compression response of normal and high strength pervious concrete. Constr Build Mater 109:177-187.
https://doi.org/10.1016/j.conbuildmat.2016.01.051
[30] Chen T, Gao X (2020) Use of carbonation curing to improve mechanical strength and durability of pervious concrete. ACS Sustain Chem Eng 8(9):3872-3884.
https://doi.org/10.1021/acssuschemeng.9b07348
[31] López-Carrasquillo V, Hwang S (2017) Comparative assessment of pervious concrete mixtures containing fly ash and nanomaterials for compressive strength, physical durability, permeability, water quality performance and production cost. Constr Build Mater 139, 148-158.
https://doi.org/10.1016/j.conbuildmat.2017.02.052
[32] Adil G, Kevern JT, Mann D (2020) Influence of silica fume on mechanical and durability of pervious concrete. Constr Build Mater 247:118453.
https://doi.org/10.1016/j.conbuildmat.2020.118453
[33] Liu T, Wang Z, Zou D, Zhou A, Du J (2019) Strength enhancement of recycled aggregate pervious concrete using a cement paste redistribution method. Cem Concr Res 122:72-82.
https://doi.org/10.1016/j.cemconres.2019.05.004
[34] Wang S, Zhang G, Wang B, Wu M (2020) Mechanical strengths and durability properties of pervious concretes with blended steel slag and natural aggregate. J Clean Prod 271:122590.
https://doi.org/10.1016/j.jclepro.2020.122590
[35] Shen P, Lu JX, Zheng H, Liu S, Poon CS (2021) Conceptual design and performance evaluation of high strength pervious concrete. Constr Build Mater 269:121342.
https://doi.org/10.1016/j.conbuildmat.2020.121342
[36] GB 175-2007 (2007) Common Portland cement. General Administration of Quality Supervision, Inspection and Quarantine, China (in Chinese).
[37] Li LG, Ouyang Y, Ng PL, Zeng KL, Kwan AKH (2021) Influences of fiber length and water film thickness on fresh properties of basalt fiber-reinforced mortar. J Zhejiang Univ-Sci A.
https://doi.org/10.1631/jzus.A2000401
[38] Wu Q, An X, Liu C (2014) Effect of polycarboxylate-type superplasticizer on the paste fluidity based on the water film thickness of flocs. Sci China Technol Sci 57(8):1522-1531.
https://doi.org/10.1007/s11431-014-5594-1
[39] CJJ/T 135-2009 (2009) Technical specification for pervious cement concrete pavement, Ministry of Housing and Urban-Rural Development, China (in Chinese).
[40] Li LG, Feng JJ, Zhu J, Chu SH, Kwan AKH (2021) Pervious concrete: Effects of porosity on permeability and strength. Mag Concr Res 73(2):69-79.
https://doi.org/10.1680/jmacr.19.00194
[41] Chandrappa AK, Biligiri KP (2016) Comprehensive investigation of permeability characteristics of pervious concrete: A hydrodynamic approach. Constr Build Mater 123:627-637.
https://doi.org/10.1016/j.conbuildmat.2016.07.035
[42] Li LG, Kwan AKH (2014) Packing density of concrete mix under dry and wet conditions. Powder Technol 253:514-521.
https://doi.org/10.1016/j.powtec.2013.12.020
[43] Li LG, Ouyang Y, Zhuo ZY, Kwan AKH (2021) Adding ceramic polishing waste as filler to reduce paste volume and improve carbonation and water resistances of mortar. Adv Bridge Eng 2:3.
https://doi.org/10.1186/s43251-020-00019-2
[44] Chen GM, Lin ZH, Li LG, He JL, Kwan AKH (2021) Compressive behaviour of concrete incorporating clay brick fines added by paste replacement method. J Mater Civil Eng.
https://doi.org/10.1061/(ASCE)MT.1943-5533.0003752
[45] Li LG, Huang ZH, Zhu J, Kwan AKH, Chen HY (2017) Synergistic effects of micro-silica and nano-silica on strength and microstructure of mortar. Constr Build Mater 140:229-238.
https://dx.doi.org/10.1016/j.conbuildmat.2017.02.115
[46] Li LG, Xiao BF, Fang ZQ, Xiong Z, Chu SH, Kwan AKH (2021) Feasibility of glass/basalt fiber reinforced seawater coral sand mortar for 3D printing. Addit Manuf 37:101684.
https://doi.org/10.1016/j.addma.2020.101684
[47] Li LG, Zheng JY, Ng PL, Kwan AKH (2021) Synergistic cementing efficiencies of nano-silica and micro-silica in carbonation resistance and sorptivity of concrete. J Build Eng 33:101862.
https://doi.org/10.1016/j.jobe.2020.101862
[48] Li LG, Lin CJ, Chen GM, Kwan AKH, Jiang T (2017) Effects of packing on compressive behaviour of recycled aggregate concrete. Constr Build Mater 157:757-777.
http://doi.org/10.1016/j.conbuildmat.2017.09.097
[49] Li LG, Huang ZH, Tan YP, Kwan AKH, Chen HY (2019) Recycling of marble dust as paste replacement for improving strength, microstructure and eco-friendliness of mortar. J Clean Prod 210:55-65.
http://doi.org/10.1016/j.jclepro.2018.10.332
[50] Li LG, Zhuo HX, Zhu J, Kwan AKH (2019) Packing density of mortar containing polypropylene, carbon or basalt fibres under dry and wet conditions. Powder Technol 342:433-440.
http://doi.org/10.1016/j.powtec.2018.10.005