[1] Ekmekci B, Tekkaya AE, Erden A (2007) A semi- empirical approach for residual stresses in electric discharge machining (EDM). International Journal of Machine Tools and Manufacture 47; 1214-1228. https://doi.org/ 10.1016/j.ijmachtools.2005.07.020
[2] Kunieda M, Lauwers B, Rajurkar KP, Schumacher BM (2005) Advancing EDM through fundamental insight into the process. CIRP Annals Manufacturing Technology 54:64-87. https://doi.org/10.1016/s0007-8506(07)60020-1
[3] Zhang G, Guo J, Ming W, Huang Y, Shao X, Zhang Z (2014) Study of the machining process of nano-electrical discharge machining based on combined atomistic-continuum modelling method. Applied Surface Science 290:359-367. https://doi.org/ 10.1016/j.apsusc.2013.11.084
[4] Chaudhury P, Samantaray S (2017) Role of Carbon Nano Tubes in Surface Modification on Electrical Discharge Machining -A Review. Materials Today: Proceedings 4:4079–4088. https://doi.org/ 10.1016/j.matpr.2017.02.311
[5] Yunus KM, Sudhakar RP, Pabla BS (2020) Powder mixed electrical discharge machining (PM-EDM): A methodological review. Materials Today Proceedings https://doi.org/ 10.1016/j.matpr.2020.10.122
[6] Zhang Y, Liu Y, Shen Y, Ji R, Li Z, Zheng C (2014) Investigation on the Influence of the Dielectrics on the Material Removal Characteristics of EDM. Journal of Materials Processing Technology 214:1052–1061 https://doi.org/10.1016/j.jmatprotec.2013.12.012
[7] Kumar A, Mandal A, Dixit A. R, Kumar Das A (2018) Performance Evaluation of Al2O3 Nano PowderMixed Dielectric for Electric Discharge Machining of Inconel 825. Materials and Manufacturing Processes 33:1-26. https://doi.org/10.1080/10426914.2017.1376081
[8] Kuldeep O, Garg RK, Singh RK (2011) Experimental investigation and modeling of PMEDM process with chromium powder suspended dielectric. International Journal of Applied Science and Engineering 9(2):65-81.
[9] Jawahar M, Sridhar Reddy Ch, Srinivas Ch (2019) A review of performance optimization and current research in PMEDM. Materials today 19(2):742-747. https://doi.org/ 10.1016/j.matpr.2019.08.122.
[10] Tan PC, Yeo SH, Tan YV (2008) Effects of nano-sized powder additives in micro-electrical discharge machining. International Journal of Precision Engineering and Manufacturing 9(3): 22–26.
[11] Kumar H (2014) Development of mirror like surface characteristics using nano powder mixed electric discharge machining (NPMEDM). International Journal of Advanced Manufacturing Technology 76:105–113. https://doi. org/10.1007/s00170-014-5965-6.
[12] Kolli M, Kumar A (2017) Surfactant and graphite powder–assisted electrical discharge Machining of titanium alloy. Proceedings of the Institution of Mechanical Engineers Part B: Journal of Engineering Manufacture 231:641-657. https://doi.org/ 10.1177/0954405415579019
[13] Shabgard M, Khosrozadeh B (2017) Investigation of carbon nanotube added dielectric on the surface characteristics and machining performance of Ti–6Al–4V alloy in EDM process. Journal of Manufacturing Processes 25:212–219. https://doi.org/ 10.1016/j.jmapro.2016.11.016
[14] Mohal S, Kumar H (2017) Study on the Multiwalled Carbon Nano tube Mixed EDM of AlSiCp Metal Matrix Composite. Materials Today: Proceedings 4:3987–3993. Https://doi.org/ 10.1016/j.matpr.2017.02.299
[15] Assarzadeh S; Ghoreishi M (2013) A dual response surface desirability approach to process modeling and optimization of Al2O3 powder-mixed electrical discharge machining (PMEDM) parameters. International Journal of Advanced Manufacturing Technology 64:1459–1477. doi : 10 . 1007 / s00170 - 012-4115-2
[16] Furutani K, Sato H, Suzuki M (2009) Influence of Electrical Conditions on Performance of Electrical Discharge Machining with Powder Suspended in Working Oil for Titanium Carbide Deposition Process. International Journal Of Advanced Manufacturing Technology 40 (11):1093- 1101. https://doi.org/ 10.1007/s00170-008-1420-x
[17] Peças P, Henriques E (2008) Effect of the powder concentration and dielectric flow in the surface morphology in electrical discharge machining with powder-mixed dielectric (PMD-EDM). International Journal Of Advanced Manufacturing Technology 37:1120–1132. https://doi.org/ 10.1007/s00170-007-1061-5
[18]. SinghAK, Kumar S, Singh VP (2015) Effect of the addition of conductive powder in dielectric on the surface properties of super alloy super co 605 by EDM process. International Journal Of Advanced Manufacturing Technology 77:99–106. https://doi.org/10.1007/s00170-014-6433-z
[19] Prihandana GS, Mahardika M, Hamdi M, Wong YS Mitsui K (2011) Accuracy improvement in nanographite powder-suspended dielectric fluid for micro-electrical discharge machining processes International Journal Of Advanced Manufacturing Technology 56:143–149. https://doi.org/ 10.1007/s00170-011-3152-6
[20] Bhattacharya A, Batish A, Singh G Singla VK (2012) Optimal parameter settings for rough and finish machining of die steels in powder-mixed EDM. International Journal Of Advanced Manufacturing Technology 61:537–548. https://doi.org/ 10.1007/s00170-011-3716-5
[21] Bhattacharya A, Batish A, Kumar N (2013) Surface characterization and material migration during surface modification of die steels with silicon graphite and tungsten powder in EDM process. Journal of Mechanical Science and Technology 27:133–140. https://doi.org/10.1007/s12206-012-0883-8
[22] Hosni NAJ, Lajis MA, Idris MR (2018) Modeling and Optimization of Chromium Powder Mixed EDM Parameter Effect Over the Surface Characteristics by Response Surface Methodology Approach. International Journal of Engineering Materials and Manufacture 3(2):78-86. https://doi.org/ 10.26776/IJEMM.03.02.2018.02
[23] Guua YH, Hocheng H, Choua CY, Denga CS (2003) Effect of electrical discharge machining on surface characteristics and machining damage of AISI D2 tool steel. Materials Science and Engineering 358:37-43. https://doi.org/ 10.1016/S0921-5093(03)00272-7
[24] Prabhu S, Vinayagam BK (2011) AFM surface investigation of Inconel 825 with multi wall carbon nano tube in electrical discharge machining process using Taguchi analysis. Materials Science Archives of Civil and Mechanical Engineering 11(1):149–170. https://doi.org/ 10.1016/S1644-9665(12)60180-0
[25] Prabhu S, Vinayagam BK (2013) AFM nano analysis of inconel 825 with single wall carbon nano tube in die sinking EDM process using taguchi analysis. Arabian Journal for Science and Engineering 38:1599–1613. https://doi.org/ 10.1007/s13369-012-0348-5
[26] Sari MM, Noordin MY, Brusa E (2013) Role of multi-wall carbon nanotubes on the main parameters of the electrical discharge machining (EDM) process. International Journal Of Advanced Manufacturing Technology 68:1095–102.https://doi.org/ 10.1007/s00170-013-4901-5
[27] Mai C, Hocheng H, Huang S (2011) Advantages of carbon nano tubes in electrical discharge machining. International Journal of Advance Manufacturing Technology 59:111-117. https://doi.org/ 10.1007/s00170-011-3476-2
[28] Kumar H (2015) Development of mirror like surface characteristics using nano powder mixed electric discharge machining (NPMEDM). International Journal Of Advanced Manufacturing Technology 76(1-4):105–113. https://doi.org/ 10.1007/s00170-014-5965-6
[29] Kumar A, Mandal A, Dixit A R, Kumar Das A, Kumar S, Ranjan R (2019) Comparison in the performance of EDM and NPMEDM using Al2O3 nanopowder as an impurity in DI water dielectric. The International Journal of Advanced Manufacturing Technology 100:1327–1339. https://doi.org/10.1007/s00170-018-c-z.
[30] Saravanakumar A, Santarao K, Nandin G (2018) Influence of Alumina Nano Powder Mixed Dielectric Fluid In Electric Spark Machining Of AISI D3 Steel. International Journal of Mechanical and Production Engineering Research and Development 8(2):1257-1264. 10.24247/ijmperdapr2018165
[31] Kavadea M V, Mohiteb SS, Unaunec D R (2019) Application of metal powder to improve metal removal rate in Electric Discharge Machining. Materials Today: Proceedings 16:398–404. https://doi.org/ 10.1016/j.matpr.2019.05.107
[32] Abhishek A, Sunil Sh (2015) Effect Of Chromium Powder Mixed Dielectric on Performance Characteristics of AISI D2 Die Steel Using EDM. International Journal of Research in Engineering And Technology 4(1):232-246.
[33] Fattahi H: Pak A (2018) Investigation of Ultrasonic Assisted Electro Discharge Machining with Al2O3 TiO and ZnO Nano-Powder. Amirkabir Journal of Mechanical Enineering 50(3):177-180. https://doi.org/ 10.22060/mej.2017.11875.5205
[34] Hernandez Battez A, Gonzalez R, Viescaetal JL (2018) CuO ZrO2 and ZnO nanoparticles as anti-wear additive in oil lubricants. Wear 265(3-4):422–428. Https://doi.org/ 10.1016/j.wear.2007.11.013
[35] Joshi A Y, Joshi A Y (2019) A systematic review on powder mixed electrical discharge machining. Heliyon 5: 1-12. https://doi.org/10.1016/ j.heliyon.2019.e02963.
[36] Choudhary KK (2012) Analysis of temperature-dependent electrical resistivity of ZnO nano-structures. Journal of Physics and Chemistry of Solids 73:460–464. https://doi.org/ 10.1016/j.jpcs.2011.11.020
[37] Olorunyolemi T, Birnboim A, Carmel Y ; Jr OW ; Lloyd I K (2002) Thermal Conductivity of Zinc Oxide: From Green to Sintered State. Journal of the American Ceramic Society 85(5):1249–53. https://doi.org/ 10.1111/j.1151-2916.2002.tb00253.x
[38] Khoshhesab Z M, Sarfaraz M ; Asadabad M A (2011) Preparation of ZnO Nanostructures by Chemical Precipitation Method synthesis and Reactivity in Inorganic Metal-Organic and Nano-Metal. Chemistry 41(7):814-819 https://doi.org/10.1080/15533174.2011.591308
[39] Akhtar M J, Ahamed M, Kumar S, Khan MA M, Ahmad J, SAlrokayan A (2012) Zinc oxide nanoparticles selectively induce apoptosis in human cancer cells through reactive oxygen species. International Journal of Nanomedicine 7:845-857. https://doi.org/10.2147/IJN.S29129
[40] Ji R, Liu Y, Diao R, Xu C, Li X, Yonghong Liu Cai B, Zhang Y (2014) Influence of Electrical Resistivity and Machining Parameters on Electrical Discharge Machining Performance of Engineering Ceramics. PLoS ONE 9(11):1-9. https://doi.org/10.1371/journal.pone.0110775
[41] Gu L, Zhu Y, He G, Farhadi A, Zhao W (2019) Coupled numerical simulation of arc plasma channel evolution and discharge crater formation in arc discharge machining. International Journal of Heat and Mass Transfer 135:674-684. https://doi.org/ 10.1016/j.ijheatmasstransfer.2019.02.022
[42] Guu YH, Mai CC, Hocheng H (2008) Applications of carbon nanotubes in nontraditional machining and microscopy In: Mishra AK editor Applications of carbon nanotubes. Nova Science Publishers 111–26.
[43] Khan AA, Ndaliman MB, Zain ZM, Jamaludin MF, Patthi U, (2012) Surface modification using electric discharge machining (EDM) with powder addition. Applied Mechanics and Materials 110–116:725–33 https://doi.org/ 10.4028/www.scientific.net/AMM.110-116.725