Cell culture
BMSC and MC3T3-E1 cells were procured from iCell Bioscience Inc. (No. MIC-iCell-s018 and No. iCell-m031). Cryovials containing these cells were immersed in a 37℃ water bath and agitated to expedite the thawing process. Post-thawing, cells were aliquoted into either the primary mesenchymal stem cell culture medium (iCell, Shanghai, China) or a complete growth medium, ensuring homogeneous integration. Subsequently, mixture undergoes centrifugation at 1000 rpm for a duration ranging from 3 to 5 min; supernatant was then aspirated, leaving the cells to be resuspended. Cellular suspension was thereafter transferred into culture flasks pre-equilibrated with the corresponding culture medium or complete growth medium. Flasks were subsequently incubated at 37℃ with 5% CO2 for cell cultivation.
Cell processing
DMSO was utilized to formulate a suspension of GW4869. BMSCs were subjected to treatment with GW4869 at concentrations of 5 and 10 µM (HY-19363, MCE, Shanghai, China) or with miR-122-5p mimic/NC via lentivirus overexpression, followed by collection of exosomes secreted by BMSCs. After 48 hours of co-culture with MC3T3-E1 cells, the exosomes were collected. In a separate experimental series, Lipofectamine 2000 (11668019, Invitrogen, California, USA) was initially employed to transfect miR-122-5p mimic/NC into MC3T3-E1 cells, which were subsequently transfected with OE-SPRY2/NC (overexpression plasmid) 48 h later. Cells were harvested after another 48 h of culture.
Exosome extraction
Cells were placed into sterile, enzyme-free 15 mL centrifuge tubes, followed by centrifugation at 4℃ with a force of 2000×g for 30 min. Those samples were then passed via a 0.22 µm membrane and transferred to new centrifuge tubes for resting on ice. An equal volume to cell volume of Total Exosome Isolation Reagent (4478359, Invitrogen, California, USA) was added to the samples, which were then thoroughly mixed by pipetting. Then mixture was rotated at a temperature between 2 ~ 8℃ for 30 min to ensure uniform blending. Subsequently, centrifugation was performed at 25℃ with a force of 10000×g for 10 min. The supernatant was discarded, and the pellet was resuspended within PBS to obtain exosome sample.
Identification of exosomes
Exosome samples from various groups were applied onto carbon-supported film-coated copper grids, where excess liquid was absorbed after 3 to 5 min. Subsequently, a 2% PBS (Servicebio, Wuhan, China) was applied, and once dried, the grids were examined under a transmission electron microscope (HITACHI, Japan). Those samples, diluted with 1X PBS buffer, were placed into a cleaned sample chamber for Nanoparticle Tracking Analysis (NTA) with the ZetaView PMX 110 apparatus (Particle Metrix, Germany) to assess exosomes.
Dual-luciferase assay
Upon the application of dual-luciferase assay kit (RG008, Beyotime, Shanghai, China), the experiment was conducted. Linear fragments of the pGL6-miR vector were digested with HindIII and BamHI restriction endonucleases (ER0051, Invitrogen, CA, USA), followed by a 2-h incubation in a water bath, and then retrieved with the kit. SPRY2 gene (ELK biotechnology, Wuhan, China) was amplified via PCR and underwent a recombination reaction with the vector at 37℃ for 30 min. High-efficiency DH5a competent cells (EC001, ELK biotechnology, Wuhan, China) were employed for transformation, with monoclonal selection for sequencing analysis conducted after one day to isolate the correct monoclonal colonies. miR-122-5p mimic/NC (Guangzhou, China), pGL6-SPRY2 (/pGL6) & pRL-TK plasmids, and Lipofectamine 2000 (11668019, Invitrogen, CA, USA) were each diluted in Opti-MEM and incubated at 25℃ for 5 min. After combining the diluted solutions, the transfection mixture was incubated at 25℃ for 20 min. The mixture was then added to the cells and incubated at 37℃ with 5% CO2 for 24 h for transfection. Following transfection, those cells were lysed thoroughly, and 100 µL of the Renilla luciferase assay reagent (prepared at a ratio of 1:100) was added to measure relative light units. Those PCR primer sequences for SPRY2 were detailed in Supplementary Table 1, while the miR-122-5p mimic/NC sequences were presented in Supplementary Table 2.
Phalloidin and PKH26 staining
Exosome suspension was incorporated into a 2 µM PKH26 working solution (PKH26PCL, Sigma, Shanghai, China) and cultured at 25℃ for 5 min. Excess dye was removed by filtration through a 0.22 µm filter, and the mixture was subsequently added to the cells under observation. Those cells were subsequently treated with 4% paraformaldehyde for 20 min. The fixed cell smears were then removed and placed onto slides, encircled with a histological pen to prevent the loss of incubation medium during subsequent incubation steps. Red phalloidin-TRITC (40734ES75, Yeasen, Shanghai, China) was diluted 1:300 in a 1% BSA solution (4240GR250, Biofroxx, Guangzhou, China) to create the working solution. Following PBS rinsing, DAPI (D8417-1MG, Sigma, Shanghai, China) was applied for nuclear staining and cultured in the dark at 25℃ for 20 to 30 min. Finally, the slides were sealed using anti-fluorescence quenching mounting medium (V900155-25G, Sigma, Shanghai, China) before being examined and imaged under a microscope.
qRT-PCR analysis
Total cellular RNA was isolated with TRIzol (EP013, ELK Biotechnology, Wuhan, China). Synthesis of the first-strand cDNA was facilitated by the EntiLink™ 1st Strand cDNA Synthesis Super Mix (EQ031, ELK Biotechnology, Wuhan, China). qPCR was performed with the EnTurbo™ SYBR Green PCR SuperMix kit (EQ001, ELK Biotechnology, Wuhan, China). Reaction protocol entailed an initial denaturation phase at 90℃ for 30 s, followed by 40 rounds consisting of 90℃ for 10 s, 58℃ for 30 s, and 72℃ for 30 s. For the shake of miR-122-5p quantification, U6 was deemed as an endogenous reference gene, whereas GAPDH assumes this role in other instances. Specific primer sequences were delineated in Table 1.
Table 1
Name
|
5’-3’ sequences
|
GAPDH
|
F: TGAAGGGTGGAGCCAAAAG
|
R: AGTCTTCTGGGTGGCAGTGAT
|
RUNX2
|
F: CGCCACCACTCACTACCACAC
|
R: TGGATTTAATAGCGTGCTGCC
|
ALP
|
F: TGACTACCACTCGGGTGAACC
|
R: TGATATGCGATGTCCTTGCAG
|
OSX
|
F: TGTCTATAAGCCCAAGGCGG
|
R: TCCTGACAGTTGGGGCAGTC
|
OCN
|
F: TTCTGCTCACTCTGCTGACCC
|
R: CTGATAGCTCGTCACAAGCAGG
|
OPN
|
F: TCTGAGGGACTAACTACGACCAT
|
R: TGGAAGAGTTTCTTGCTTAAAGTC
|
U6
|
F: CTCGCTTCGGCAGCACAT
|
R: AACGCTTCACGAATTTGCGT
|
miR-122-5p
|
F: TCAGGTGGAGTGTGACAATGG
|
R: CTCAACTGGTGTCGTGGAGTC
|
Western Blot
Cells were lysed, with the lysate solution (AS1004, ASPEN), yielding a total protein extract. The protein content was determined with the BCA Protein Assay Kit (AS1086, ASPEN). SDS-PAGE gels were formulated, with each well loaded with 20 µg of protein, followed by electrophoresis and membrane transfer. Primary antibodies (diluted to 1:1000) were incubated overnight at 4℃, followed by secondary antibodies (diluted to 1:10000) were incubated at 25℃ for 30 min. Subsequently, freshly prepared ECL luminescent reagent (A:B = 1:1; AS1059, ASPEN) was added, and the gel was scanned and archived. AlphaEaseFC software was employed to analyze the optical density values.
Primary antibodies utilized in this experiment included rabbit antibodies targeting GAPDH (1:10000; ab181602, abcam, Shanghai, China), RUNX2 (20700-1-AP, Proteintech, Wuhan, China), ALP (18507-1-AP, Proteintech, Wuhan, China), OSX (ab209484, abcam, Shanghai, China), OCN (ab93876, abcam, Shanghai, China), OPN (ab63856, abcam, Shanghai, China), and SPRY2 (ab85670, abcam, Shanghai, China). Secondary antibody was an HRP-conjugated rabbit anti-goat antibody (AS1108, ASPEN).
ARS staining
Cell specimens were treated with a 4% paraformaldehyde solution (80096618, Sinopharm Chemical Reagent Co., Ltd, Shanghai, China) for 10 to 20 min, followed by another rinse with PBS. Subsequently, specimens were stained with ARS staining solution (G1038, Servicebio Wuhan, China) for 5 to 10 min. After air-drying the slides, they were clarified with xylene (10023418, Sinopharm Chemical Reagent CO., Ltd, Shanghai, China) for 5 min, and subsequently mounted with neutral gum (G8590, Solarbio, Beijing, China). Those slides were examined and photographed under an inverted microscope (OLYMPUS, Japan).
ALP staining
Cell samples were treated with a 4% paraformaldehyde solution (80096618, Sinopharm Chemical Reagent CO., Ltd, Shanghai, China) for a period ranging from 10 to 20 min, followed by another wash with PBS. Subsequently, working solution (C3206, Beyotime, Shanghai, China) was applied, and those samples were incubated at 37℃ in a dark environment for 30 to 60 min, followed by a rinse with distilled water to terminate the reaction. Samples were then treated with Azure B solution for 3 min, followed by staining with hematoxylin solution (H9627-25G, Sigma, Shanghai, China) for a duration of 3 to 10 min. Differentiation was carried out with 1% hydrochloric acid (10011018, Sinopharm Chemical Reagent CO., Ltd, Shanghai, China), and the samples were re-stained with 1% ammonia water (10002018, Sinopharm Chemical Reagent CO., Ltd, Shanghai, China) for the blueing processing, concluding with mounting with glycerin gelatin (10010618; 10010328, Sinopharm Chemical Reagent CO., Ltd, Shanghai, China).
Statistic analysis
All data in this study are reported as mean ± SD with n = 3. Results of the experiment were analyzed and graphed with GraphPad Prism 8.0. For comparing multiple groups, meet the criteria for normal distribution, we used a one-way analysis of variance with Tukey’s post hoc test for data that followed a normal distribution; when the normal distribution was not met, the Friedman test was utilized. A statistical difference was determined to be true when p < 0.05.