[1]
|
SAMES WJ, LIST F A, PANNALA S, DEHOFF R R, BABU S S. The metallurgy and processing science of metal additive manufacturing [J]. International Materials Reviews, 2016, 61:5, 315-360: 1-46.
|
[2]
|
WANG P, ZHOU H, ZHANG L, CHEN H, ZHU X, LEI H, FANG D. In situ X-ray micro-computed tomography study of the damage evolution of prefabricated through-holes in SLM-Printed AlSi10Mg alloy under tension [J]. Journal of Alloys and Compounds, 2020, 821, 1-8.
|
[3]
|
ROMANO S, ABEL A. Quality control of AlSi10Mg produced by SLM: Metallography versus CT scans for critical defect size assessment [J]. Journal of Additive Manufacturing, 2019, 394-405.
|
[4]
|
ARFAN MAJEED, YINGFENG Zhang, JINGXIANG Lv, TAO Peng, ZAHID Atta, ALTAF AHMED. Investigation of T4 and T6 heat treatment influences on relative density and porosity of AlSi10Mg alloy components manufactured by SLM [J]. Computers & Industrial Engineering, 139, 2020, 1-16.
|
[5]
|
KUGAEVSKIIS, PIZHENKOV E, GAMBERGA. The effectiveness of additive SLM-technologies in the manufacture of cutting tools [J]. Materials Today: Proceedings, 2019, 19, 1977-81:1-5.
|
[6]
|
HADADZADEHA, AMIRKHIZB S, SAJAD SHAKERIN, KELLY J, LI J, MOHAMMADIM. Microstructural investigation and mechanical behavior of a two-material component fabricated through selective laser melting of AlSi10Mg on an Al- Cu-Ni-Fe-Mg cast alloy substrate [J]. Journal of Additive manufacturing, 2020, 31, 1-36.
|
[7]
|
GIANNI NICOLETTO. Influence of rough as-built surfaces on smooth and Notched fatigue behavior of L-PBF AlSi10Mg [J]. Journal of Additive manufacturing, 2020, 34, 1-12.
|
[8]
|
RAMBABU P, ESWARA PRASAD N, KUTUMBARAO VV, WANHILL RJH. Aluminium Alloys for Aerospace Applications [M]. Aerospace Materials and Technologies: Vol.1 –Aerospace Materials, Springer - IIM Book Series, Springer Nature Publications, Singapore, 2017: 29-52.
|
[9]
|
ESWARA PRASAD N, GOKHALES AA, WANHILL RJH. Aluminium - Lithium Alloys [M]. Aerospace Materials and Technologies: Vol.1 – Aerospace Materials, Springer - IIM Book Series, Springer Nature Publications, Singapore, 2017: 53-72.
|
[10]
|
SINGHRK, SINGH AK, ESWARA PRASAD N. Texture and Mechanical Property Anisotropy in an Al-Mg-Si-Cu Alloy [J]. Materials Science and Engineering A, Vol. A, 277, 2000 :114 – 122.
|
[11]
|
ESWARA PRASAD N, VOGT D, BIDLINGMAIER T, WANNER A, ARZT E. High Temperature Low Cycle Fatigue Behaviour of an Aluminium Alloy (Al-12Si CuMgNi) [J]. Materials Science and Engineering A, Vol. A276, 2000: 283 – 287.
|
[12]
|
ESWARA PRASAD N, VOGT D,BIDLINGMAIER T, WANNER A, ARZT E. Effect of Prior Fatigue Exposure on the Creep Behaviour of an Aluminium Alloy (Al-12Si-CuMgNi) [J]. Zeitschrift fur Metallkunde, Vol. 91, 2000:190 – 195.
|
[13]
|
ESWARA PRASAD N, VOGT D, BIDLINGMAIER T, WANNER A, ARZT E. Low Cycle Fatigue and Creep – Fatigue Interaction in a Short Fibre-Reinforced Aluminium Alloy Composite [J]. Materials Science and Technology, Vol. 26, 2010: 1363 – 1372.
|
[14]
|
CHVS MURTHY, ANANT SAGAR DB, ESWARA PRASAD N. A Technical Report on “The Effect of Heat Treatment on Microstructure and Mechanical Properties of Nickel Base Cast Superalloy Supercast 247 A [J]. RCMA Technical Report No. RCMA (Mat.) / 01 / 2013 (Restricted): 181-185.
|
[15]
|
AMIT KUMAR, GOBARDHAN LAL, MAHESH CHANDRA, ESHWARA PRASAD N. Recent Development in Ellipsometry [C]// Proc National Seminar on Functional and Engineering Materials (FEM-2016), DESIDOC, New Delhi, 2016.
|
[16]
|
GIBSON I, DAVID W ROSEN, BRENT STUCKER. Additive Manufacturing Technologies Rapid Prototyping to Direct Digital Manufacturing [M]. Springer Publications, 2010.
|
[17]
|
MUHAMMAD AZAM, MIRZA JAHANZAIB, JUNAID ALI ABBASI, MUSHARAF ABBAS, AHMAD WASIM, SALMAN HUSSAINS. Parametric analysis of recast layer formation in wire-cut EDM of HSLA steel [J].International Journal of Advanced Manufacturing technologies, 87, 2016: 713-722.
|
[18]
|
JIN YUAN, KESHENG WANG, TAO YU, MINGLUN FANG. Reliable multi-objective optimization of high-speed WEDM process based on Gaussian process regression [J]. International journal of machine tools and manufacture, 2008, 48: 47-60.
|
[19]
|
KH HO, NEWMANST, RAHIMIFARD S, ALLEN R D. State of the art in wire electrical discharge machining (WEDM) [J]. International journal of machine tools & manufacture, 2004, 44, 1247-1259.
|
[20]
|
Xiaoyu WU, Shujuan LI, Zhen JIA, Bin XIN, Xincheng YIN. Using WECM to remove the recast layer and reduce the surface roughness of WEDM surface [J]. Journal of Materials Processing Technology, 2019, 268: 140-148.
|
[21]
|
Zhen ZHANG, Hao HUANG, Wuyi MING, Zhong XU, YU Huang, Guojun ZHANG. Study on machining characteristics of WEDM with ultrasonic vibration and magnetic field assisted techniques [J]. Journal of Materials Processing Technology, 2016, 234: 342-352.
|
[22]
|
MAHER I, ADSARHANA, MARASHIH. Effect of Electrical Discharge Energy on White Layer Thickness of WEDM [J]. Comprehensive Materials Finishing, 2017, 1: 231-266.
|
[23]
|
HAMDYA SABRINA MOHIDIN YAHYA, TARIQ ABBAS, NOR AISHAH SAIDINA AMIN. Optimization of hydrogen production via toluene steam reforming over NieCo supported modified-activated carbon using ANN coupled GA and RSM [J]. International Journal of Hydrogen Energy, 2020: 1-20.
|
[24]
|
SANDEEP DESHWAL, ASHWANI KUMAR, DEEPAK CHHABRA. Exercising hybrid statistical tools GA-RSM, GA-ANN and GA-ANFIS to optimize FDM process parameters for tensile strength improvement [J].CIRP Journal of Manufacturing Science and Technology, 2020: 1-11.
|
[25]
|
VENKATESH PRABHUM, KARTHIKEYAN R. Comparative studies on modelling and optimization of hydrodynamic parameters on inverse fluidized bed reactor using ANN-GA and RSM [J]. Alexandria Engineering Journal, 2018, 57, 3019-32:1-14.
|
[26]
|
PUVIYARASAN M, SENTHIL KUMAR VS. An Experimental Investigation for Multi-Response Optimization of Friction Stir Process Parameters During Fabrication of AA6061/B4Cp Composites [J]. Arabian Journal of Science and Engineering, 2015, 40, 1733–1741.
|
[27]
|
TANGUDU BHARAT KUMAR, APURBARANJAN PANDA, GAURAV KUMAR SHARMA, ARUNKISHOR JOHAR, SOUGATA KUMAR KAR, DHARMENDARBOOLCHANDANI. Taguchi DoE and ANOVA: A systematic perspective for performance optimization of cross-coupled channel length modulation OTA [J]. 2020, 116, 153070: 1-10.
|
[28]
|
HABARGHOOEI, HARABI, SHSEYEDEIN, BMIRZAKHANI. Modeling of Steady State Hot Flow Behavior of API-X70 Microalloyed Steel using Genetic Algorithm and Design of Experiments [J]. Applied Soft Computing Journal, 2017, 52, 471-77: 1-27.
|
[29]
|
RAVINDRA BABUP, SYAM SUNDER K, SIVA PRASAD T, RAJU AVS, ESWARA PRASAD N. Optimisation of Burnishing Parameters and Evaluation of Surface Characteristics, Microstructure and Micro Hardness in Brass [C]. International Manufacturing Science and Engineering, MSEC – ASME, Notre Dama, Indiana, USA, 2012: 503-520.
|
[30]
|
BABU PR, ANKAMMA RAO K, ESWARA PRASAD N. Burnishing of Engineering Materials [M]. Process Optimisation (DOE) & Maps, LAP LAMBERT Academic Publishing GmbH, Saarbrucken, Germany, 2012.
|
[31]
|
RAVINDRA BABU P, ANKAMMA RAO K, SIVA PRASAD T, RAJU AVS, ESWARA PRASADN. Optimisation of Burnishing Parameters by DOE and Surface Roughness, Microstructure and Micro Hardness Characteristics of AA6061 Aluminium Alloy in T6 Condition [J]. International Journal of Engineering Research and Applications, Vol. 2, 2012: 1139-1146.
|
[32]
|
RAVINDRA BABU P, ANKAMMA K, SIVA PRASAD T, RAJU AVS, ESWARA PRASADN. Optimisation of Burnishing Parameters and Determination of Select Surface Characteristics in Engineering Materials [J]. Academy Proceedings of Engineering Sciences, The Indian Academy of Science, Vol. 37, 2012: 503 – 520.
|
[33]
|
ESWARA PRASAD N. Aluminium Alloy Ak 6 (Stampings) [M].JSS 9630-16:2013, MSSC, MoD, GoI, New Delhi, 2013:
|
[34]
|
MUSTAFA AYDIN, SAMET USLU, BAHATTIN ÇELIK M. Performance and emission prediction of a compression ignition engine fuelled with biodiesel-diesel blends: A combined application of ANN and RSM based optimization [J]. Fuel, 2020, 269, 117472: 1-10.
|
[35]
|
SHAHBAZ M, TAQVI SA, LOY ACM, INAYAT A, UDDIN F, BOKHARI A. Artificial neural network approach for the steam gasification of palm oil waste using bottom ash and CaO [J]. Renewable Energy, 2019; 132: 243-54:1-46.
|
[36]
|
JHA P, KANA EBG, SCHMIDT S CAN NASRUDIN NA, JEWARATNAM J, HOSSAIN A, GANESON PB. Performance comparison of feed forward neural network training algorithms in modelling microwave pyrolysis of oil palm fibre for hydrogen and biochar production [J]. Asia Pac J Chem Eng 2019; 15 (1):e2388: 1-16.
|
[37]
|
SHAHBAZ M, TAQVI SA, LOY ACM, INAYAT A, UDDIN F, BOKHARI A. Artificial neural network approach for the steam gasification of palm oil waste using bottom ash and CaO [J]. Renewable Energy, 2019,132:243-54: 1-46.
|
[38]
|
TALEBIAN-KIAKALAIEH A, AMIN NAS, ZAREI A, NOSHADI I. Transesterification of waste cooking oil by heteropoly acid (HPA) catalyst: optimization and kinetic model [J]. Appl Energy, 2013,102:283-292.
|
[39]
|
KASMURI NH, KAMARUDIN SK, ABDULLAH SRS, HASAN HA, SOM AM. Integrated advanced nonlinear neural network simulink control system for production of bio-methanol from sugar cane bagasse via pyrolysis [J]. Energy, 2019, 168:261-272.
|
[40]
|
NASRUDIN NA, JEWARATNAM J, HOSSAIN A, GANESON PB. Performance comparison of feedforward neural network training algorithms in modelling microwave pyrolysis of oil palm fibre for hydrogen and biochar production [J]. Asia Pac J Chem Eng 2019; 15(1):e2388: 1-16.
|
[41]
|
Shin Y, Kim Z, Yu J, Kim G, Hwang S. Development of NOx reduction system utilizing artificial neural network (ANN) and genetic algorithm (GA) [J]. J Clean Prod 2019; 232:1418-29.
|
[42]
|
PRAKASH MARAN LJ, SIVAKUMAR V, THIRUGNANASAMBANDHAM K, SRIDHAR R. Artificial neural network and response surface methodology modeling in mass transfer parameters predictions during osmotic dehydration of Carica papaya [J]. Alex. Eng. J., 2013: 507–516.
|
[43]
|
B Jiang, F Zhang, Y Sun, X Zhou, J Dong, L Zhang. Modeling and Optimization for curing of polymer flooding using an artificial neural network and a genetic algorithm [J]. J. Taiwan Int. Chem. Eng., 2014, 881: 1-8.
|
[44]
|
MCGEOUGH JA. Electro Discharge Machining in Advanced Methods of Machining [M]. Springer: Dordrecht, 1988.
|
[45]
|
Hassan El-Hofy, Advanced Machining Processes [M], McGraw-Hill, 2005.
|
[46]
|
ChunxiaWUET, Xiaoyu WU, Hang ZHAO, Bin XU. Effect of sub-millimetre morphologies on the hydrophobicity of a copper surface prepared by WEDM [J]. Surface & Coatings Technology, 2020, 385, 125455:1-9.
|
[47]
|
Yan WANG, Zong-Xue LI, Shun-Wen YAO, Cheng-Zen WU. Analysis of discharge channel characteristics based on plasma flow and heat transfer in USV-MF complex assisted WEDM-LS [J]. International Journal of Heat and Mass Transfer, 2019, 150, 1-13.
|