1.Bikas, H., Stavropoulos, P., and Chryssolouris, G., 2016. “Additive manufacturing methods and modelling approaches: a critical review”. The International Journal of Advanced Manufacturing Technology, 83(1-4), pp. 389–405.
2.Lipton, J. I., Cutler, M., Nigl, F., Cohen, D., and Lipson, H., 2015. “Additive manufac- turing for the food industry”. Trends in food science & technology, 43(1), pp. 114–123.
3.Tan, H. W., An, J., Chua, C. K., and Tran, T., 2019. “Metallic nanoparticle inks for 3d printing of electronics”. Advanced Electronic Materials, 5(5), p. 1800831.
4.Murr, L. E., 2016. “Frontiers of 3d printing/additive manufacturing: from human organs to aircraft fabrication”. Journal of Materials Science & Technology, 32(10), pp. 987– 995.
5.Talagani, M., DorMohammadi, S., Dutton, R., Godines, C., Baid, H., Abdi, F., Kunc, V., Compton, B., Simunovic, S., Duty, C., et al., 2015. “Numerical simulation of big area additive manufacturing (3d printing) of a full size car”. Sampe Journal, 51(4), pp. 27–36.
6.Pivsa-Art, W., Chaiyasat, A., Pivsa-Art, S., Yamane, H., and Ohara, H., 2013. “Prepa- ration of polymer blends between poly (lactic acid) and poly (butylene adipate-co- terephthalate) and biodegradable polymers as compatibilizers”. Energy Procedia, 34, pp. 549–554.
7.Davis, J. R., 2004. Tensile testing. ASM international.
8.Wang, L., and Gardner, D. J., 2017. “Effect of fused layer modeling (flm) processing parameters on impact strength of cellular polypropylene”. Polymer, 113, pp. 74–80.
9.Tymrak, B., Kreiger, M., and Pearce, J. M., 2014. “Mechanical properties of compo- nents fabricated with open-source 3-d printers under realistic environmental conditions”. Materials & Design, 58, pp. 242–246.
10.Bledzki, A. K., Jaszkiewicz, A., and Scherzer, D., 2009. “Mechanical properties of pla composites with man-made cellulose and abaca fibres”. Composites Part A: Applied science and manufacturing, 40(4), pp. 404–412.
11.Tanikella, N. G., Wittbrodt, B., and Pearce, J. M., 2017. “Tensile strength of commercial polymer materials for fused filament fabrication 3d printing”. Additive Manufacturing, 15, pp. 40–47.
12.Liu, X., Zhang, M., Li, S., Si, L., Peng, J., and Hu, Y., 2017. “Mechanical property parametric appraisal of fused deposition modeling parts based on the gray taguchi method”. The International Journal of Advanced Manufacturing Technology, 89(5), pp. 2387–2397.
13.Pei, E., Lanzotti, A., Grasso, M., Staiano, G., and Martorelli, M., 2015. “The impact of process parameters on mechanical properties of parts fabricated in pla with an open- source 3-d printer”. Rapid Prototyping Journal.
14.Gunst, R. F., and Mason, R. L., 2009. “Fractional factorial design”. Wiley Interdisci- plinary Reviews: Computational Statistics, 1(2), pp. 234–244.
15.Montgomery, D. C., 2017. Design and analysis of experiments. John wiley & sons.