Choi, D., et al. (1991). Image analysis to measure strain in wood and paper. Wood Science and Technology 25(4): 251-262.
Chui, Y. (2002). Application of ribbed-plate theory of predict vibrational serviceability of timber floor systems. The Proceedings of 7 th World Conference on Timber Engineering WCTE, Vol 4: 87-93.
Dahl, K. and K. Malo (2009). Planar strain measurements on wood specimens. Experimental mechanics 49(4): 575-586.
Dahl, K. B. and K. Malo (2009). Linear shear properties of spruce softwood. Wood Science and Technology 43(5-6): 499-525.
Dahl, K. B. and K. Malo (2009). Nonlinear shear properties of spruce softwood: experimental results. Wood Science and Technology 43(7-8): 539-558.
EN 338:2009 (2009). Structural Timber - Strength Classes. European Committee for Standardization, Brussels, Belgium.
EN 408:2012 (2012). Timber structures-structural timber and glued laminated timber- determination of some physical and mechanical properties perpendicular to the grain. European Committee for Standardization, Brussels, Belgium.
EN 1995-1-1 (2004). Eurocode 5-Design of Timber Structures-Part 1-1: General-Common Rules and Rules for Buildings. European Committee for Standardization, Brussels, Belgium.
Foschi, R. O. (1982). Structural analysis of wood floor systems. Journal of the Structural Division 108(7): 1557-1574.
Franke, S., et al. (2007). Strain analysis of wood components by close range photogrammetry. Materials and structures 40(1): 37-46.
Garcia, D. and J.-J. Orteu (2001). 3D deformation measurement using stereo-correlation applied to experimental mechanics. Proceedings of the 10th International Symposium Deformation Measurements.
Gharavi, N. and Zhang, H., 2018. Study on the Impact of Size and Position of the Shear Field in Determining the Shear Modulus of Glulam Beam Using Photogrammetry Approach. World Academy of Science, Engineering and Technology, International Journal of Structural and Construction Engineering, 12(3), pp.218-222. doi.org/10.5281/zenodo.1315953
Gharavi N, Zhang H, Xie Y., 2017. Evaluation of the end effect impact on the torsion test for determining the shear modulus of a timber beam through a photogrammetry approach. World Academy of Science, Engineering and Technology, International Journal of Mechanical and Mechatronics Engineering, 11(3):677–680. doi.org/10.5281/zenodo.1129778
Gharavi, N., Zhang, H., Xie, Y. and He, T. (2018). End effect on determining shear modulus of timber beams in torsion test, Construction and Building Materials, 164:442-450.
Guindos, P. and J. Ortiz (2013). Low cost photogrammetry as a tool for stiffness analysis and finite element validation of timber with knots in bending, Biosystems Engineering, 114(2): 86-96.
Gupta, R., et al. (2002). Experimental evaluation of the torsion test for determining shear strength of structural lumber. Journal of testing and evaluation 30 (4): 283-290.
Gupta, R., Siller, Tobias (2005). Shear strength of structural composite lumber using torsion tests. Journal of testing and evaluation 33 (2): 110-117.
Hartley, R. and A. Zisserman (2003). Multiple view geometry in computer vision, Cambridge university press.
Hindman, D., et al. (2005a). Torsional rigidity of rectangular wood composite materials. Wood and fiber science 37 (2): 283-291.
Hindman, D., et al. (2005b). Torsional rigidity of wood composite I-joists. Wood and fiber science 37 (2): 292-303.
Jiang, L., et al. (2004). Finite-element model for wood-based floors with lateral reinforcements. Journal of Structural Engineering 130(7): 1097-1107.
Khokhar, A., et al. (2010). The shear strength, and failure modes, of timber joists obtained from the torsion test method. Proceedings of the 11th World Conference of Timber Engineering, 20-24th June, Riva del Garda, Italy.
Khokhar, A. M. (2011). The Evaluation of Shear Properties of Timber Beams Using Torsion Test Method. PhD Thesis, Edinburgh Napier University, Edinburgh, UK.
Maas, H.-G. and U. Hampel (2006). Photogrammetric techniques in civil engineering material testing and structure monitoring. Photogrammetric Engineering & Remote Sensing 72(1): 39-45.
MVTech Software HALCON GmbH (2019). The software for Machine Vision Applications. http:// www.mvtech.com/halcon/.
Steger, C., et al. (2008). Machine vision algorithms and applications. Handbook of machine vision, Wiley-VCH, Weinheim.
Xavier, J., et al. (2012). Stereovision measurements on evaluating the modulus of elasticity of wood by compression tests parallel to the grain. Construction and Building Materials 26(1): 207-215.
Zhang, H., et al. (2011). Evaluation of shear constant of a timber beam using a photogrammetric approach. Proceedings of the Thirteenth International Conference on Civil, Structural and Environmental Engineering Computing. Crete, Greece.
Zhang, H., et al. (2012). Evaluation of shear constant of timber glulam composite with photogrammetric approach. Proceedings of the Fourteenth International Conference on Computing in Civil and Building Engineering, Moscow, Russia.