[1] J. Yan, L. Eidensten, Status and Perspective of Externally Fired Gas Turbines, J. Prop. Power 16 (2000) 572-576.
[2] D. W. Richerson, Evolution in the U.S. of Ceramic Technology for Turbine Engines, Am. Ceram. Soc. Bull. 64 (1985) 282–286.
[3] A. S. Bahrani, Joining of Ceramics, Int. J. Joining Mater. 4 (1992) 558-562.
[4] J. Park, T. Phongpreecha, J. Nicholas, Y. Qi, Enhanced liquid metal wetting on oxide surfaces via patterned particles, Acta Mater. 199 (2020) 551-560.
[5] Z. Fan, Y. Zhao, Q. Tan, N. Mo, M. Zhang, M. Lu, H. Huang, Nanostructured Al2O3-YAG-ZrO2 ternary eutectic components prepared by laser engineered net shaping, Acta Mater. 170 (2019) 24-37.
[6] H.C. Jung, Y. H. Park, J. S. Park, T. Hinoki, A. Kohyama, R&D of joining technology for SiC components with channel, J. Nucl. Mater. 386-388 (2009) 847-851.
[7] B.V. Cockeram, Flexural strength and shear strength of silicon carbide to silicon carbide joints fabricated by a molybdenum diffusion bonding technique, J. Am. Ceram. Soc. 88 (2005) 1892-1899.
[8] H. Dong, S. Li, Y. Teng, W. Ma, Joining of SiC ceramic-based materials with ternary carbide Ti3SiC2, Mater. Sci. Eng. B 176 (2011) 60-64.
[9] H. Chen, L. Li, R. Kemps, B. Michielsen, M. Jacobs, F. Snijkers, V. Middelkoop, Reactive air brazing for sealing mixed ionic electronic conducting hollow fibre membranes, Acta Mater. 88 (2015) 74-82.
[10] J. Kim, K. Weil, Effects of Brazing Time and Temperature on the Microstructure and Mechanical Properties of Aluminum Air Brazed Joints, J. Am. Ceram. Soc. 90 (2007) 3830-3837.
[11] S. Mishra1, A. Sharma, D. H. Jung, J. P. Jung, Recent Advances in Active Metal Brazing of Ceramics and Process, Met. Mater. Int. 26 (2020) 1087-1098.
[12] J. Shi, L. Zhang, X. Pan, X. Tian, J. Feng, Microstructure evolution and mechanical property of ZrC-SiC/Ti6Al4V joints brazed using Ti-15Cu-15Ni filler, J. Eur. Ceram. Soc. 38 (2018) 1237-1245.
[13] Y. Liu, G. Wang, W. Cao, H. Xu, Z. Huang, D. Zhu, C. Tan, Brazing ZrB2-SiC ceramics to Ti6Al4V alloy with TiCu-based amorphous filler, J. Manuf. Process. 30 (2017) 516-522.
[14] M. Liu, C. Liu, J. Zhang, R. Tao, Q. Zhang, Q. Qi, Microstructure evolution and mechanical properties of BN-Si3N4 and AlON joints brazed with Ag-Cu-Ti filler alloy, J. Eur. Ceram. Soc. 38 (2018) 1265-1270.
[15] D. Fan, J. Huang, Y. Wang, S. Chen, X. Zhao, Active brazing of carbon fiber reinforced SiC composite and 304 stainless steel with Ti-Zr-Be, Mater. Sci. Eng. A 617 (2014) 66-72.
[16] Y. Mao, D. Mombello, C. Baroni, Wettability of Ni-Cr filler on SiC ceramic and interfacial reactions for the SiC/Ni–51Cr system, Scr. Mater. 64 (2011) 1087-1090.
[17] H. Xiong, B. Pan, W. Mao, Y. Cheng, Interfacial reactions and joining characteristics of a Cu-Pd-V system filler alloy with Cf/SiC composite, Ceram. Int. 40 (2014) 7857-7863.
[18] A. Kumar, H. Barda, L. Klinger, M. Finnis, V. Lordi, E. Rabkin, D. Srolovitz, Anomalous diffusion along metal/ceramic interfaces, Nat. Commun. 9 (2018) 5251.
[19] J. Perdew, K. Burke, M. Ernzerhof, Generalized gradient approximation made simple, Phys Rev Lett 77 (1996) 3865-3868.
[20] J. Park, T. Phongpreecha, J. Nicholas, Y. Qi, Enhanced liquid metal wetting on oxide surfaces via patterned particles, Acta Mater. 199 (2020) 551-560.
[21] T. Wang, L. Li, M. Pallaka, H. Das, S. Whalen, A. Soulami, P. Upadhyay, K. Kappagantula, Mechanical and microstructural characterization of AZ31 magnesium‑carbon fiber reinforced polymer joint obtained by friction stir interlocking technique, Mater. Design 198 (2021) 109305.
[22] X. Zhang, Y. Shi, A dissolution model of base metal in liquid brazing filler metal during high temperature brazing, Scripta Mater. 50 (2004) 1003-1006.
[23] C. Xiao, W. Jiang, Y. Yu, M. Song, S. Tu, J. Gong, Influence of borides dissolution during the homogenization treatment on the mechanical properties and fracture behavior of austenitic stainless steel brazed joints, Mat. Sci. Eng. A-Struct. 782 (2020) 139200.
[24] Z. Wang, J. Ouyang, Y. Wang, Z. Liu, Y. Ma, L. Xie, Nucleation and epitaxial growth of highly textured Al2O3-ZrO2 nanoeutectic rapidly solidified from oxyacetylene flame remelting, Ceram. Int. 44 (2018) 22027-22031.