Materials
Primary antibody of ASC (sc-365611), caspase-1(sc-56036), b-catenin (sc-59737) and p-STAT3 (sc-81523) were purchase from Santa Cruz Biotechnology (Santa Cruz, CA, USA). Primary antibody of NLPR3 (ab214185), pro-caspase-1 (ab179515), GFAP (ab48050), Iba-1 antibody used for FACS (ab178846) and secondary antibody Alexa Fluor 555 goat anti rabbit (ab150074) were purchased from Abcam (Cambridge, MA, USA). Primary antibody of Foxo3a (720128), p-GSK3b Ser9 (MA5-14873), UCP2 (PA5-80203), NeuN (PA5-78693) and Alexa Fluor-conjugated 488 secondary antibody used for FACS (A-11001) were purchased from Thermo Fisher Scientific (Waltham, MA USA). Primary antibody of GSK3b (22104-1-AP), TCF4 (22337-1-AP) and STAT3 (10253-2-AP) were purchased from Proteintech (Wuhan, Hubei, China). Primary antibody of b-actin (E021020), Histone H3 (E021130), HSP60 (A200659) and secondary antibody HRP-labelled Goat anti Mouse (E030110) and HRP-labeled Goat anti Rabbit (E030120) were purchased from Earthox (Millbrae, CA, USA). LY294002 was from PeproTech (1543664, Rocky Hill, NJ, USA). PKF115584 was from Novartis (Basel, Switzerland), WP1066 (S2796) and geninpin (S2412) was from Selleck Chemicals (Houston, Texas, USA). Iba-1 antibody used for immunofluorescence (019-19741) was purchased from Wako Chemicals (USA) Chemicals for the preparation of cell-sorting medium, p-Foxo3a antibody (PA5-37578) and Alexa Fluor-conjugated 488/555 secondary antibody (A21202, A31570) were from Gibco Life Technology Invitrogen (Grand Island, NY, USA). 2,3,5-triphenyltetrazolium chloride (T8877) was from Sigma-Aldrich (St. Louis, Missouri, USA). TUNEL apoptosis detection kit (11772457001) was purchased from Roche-Sigma (USA). The ROS assay kit (BB-470532) was purchased from BestBio (Shanghai, China). The quantitative PCR (RR820A and RR047A) was purchased from TaKaRa Bio (Kusatsu, Japanese). The ELISA kit for IL-1β (88-7013) and IL-18 (88-50618) were purchased from Thermo Fisher Scientific (Waltham, MA USA). The mitochondria extraction kit (BB-470532) was purchased from BestBio (Shanghai, China).
Animals
The wild type C57BL/6 mice (#000664), FVB/N-Tg(GFAP-eGFP)14Mes/J (#003257) and B6.Cg-Tg(Thy1-YFP)HJrs/J (#003782) transgenic mice were all purchased from the Jackson Laboratory (Bar Harbor, ME, USA). The animals were raised in standard housing conditions (22 ± 1℃; light/dark cycle of 12/12h), with water and food available ad libitum. All experiments were performed in accordance with the US National Institutes of Health Guide for the Care and Use of Laboratory Animals (NIH Publication No. 8023) and its 1978 revision, and all experimental protocols were approved by the Institutional Animal Care and Use Committee of China Medical University, No. [2020]102.
Middle cerebral artery occlusion (MCAO)
MCAO was used to model ischaemic stroke in mice. The male C57BL/6 mice, FVB/N-Tg(GFAP-eGFP)14Mes/J mice or B6.Cg-Tg(Thy1-YFP)HJrs/J transgenic mice (aged 10-12 weeks; weight of 25-35 g) were anesthetised with ketamine (80 mg/kg, i.p.) and xylazine (10 mg/kg, i.p.) and placed on their backs to expose the neck area. A 1.5 cm incision was made in the middle of neck. The right common artery (CCA) was exposed. The external arteries (ECA) and internal carotid arteries (ICA) were isolated from CCA. The distal ECA was tied off and the CCA was clipped by a bulldog clamp. The ECA was opened by arteriotomy and a 5-0 nylon monofilament (181022, LingQiao, Ningbo, Zhejiang, China) was inserted and gently advanced upwards to the ICA. The insertion was stopped when resistance was felt. After 60 min of occlusion, the monofilament was withdrawn to allow for reperfusion. The mice were dislocated executed to collect tissues, after building MCAO models with reperfusion 5 or 28 days. In sham groups, the carotid arteries were exposed and the skin was sutured. Body temperature of mice was maintained and mice were individually housed after full recovery from anaesthesia48.
Experimental design and drug administration
The wild type or transgenic mice were randomly segregated into sham plus normal solution (NS) group (control), sham plus lithium chloride group (LiCl), MCAO plus NS group (MCAO) and MCAO plus LiCl group. 30 minutes before the surgery of MCAO, some mice in MCAO groups were randomly chosen to be intraperitoneal injected with 12.5 mg/kg/day LY294002 (AKT inhibitor), 0.2 mg/kg/day PKF115584 (antagonist of β-catenin/TCF4 complex), 30 mg/kg/day WP1066 (STAT3 inhibitor) or 2.5 mg/kg/day geninpin (UCP2 inhibitor). After 30 minutes, mice with or without injected inhibitors were subjected to MCAO or treated with sham; 30 min after surgery 1 mmol/kg/day LiCl or normal saline (NS) were randomly intraperitoneally injected. After 60 minutes of ischaemia, the middle cerebral artery was reperfused, The injection of all reagents was repeated once a day for 5 days. Subsequently, 6 mice form each group were sacrificed by cervical dislocation for histology and biochemistry. Remaining mice were used for behavioural tests; detailed experimental design is shown in Supplementary figure 1.
Immunofluorescence (IF)
To identify the levels of NLRP3, caspase-1, GSDMD in three nerve cells (neurones, astrocytes and microglia) in ischaemic penumbra area of cerebral cortex. The anaesthetised mice were myocardially perfused with 4% paraformaldehyde (PFA) for 15 minutes. The collected brains were fixed by immersion in 4% paraformaldehyde and cut into 60 μm slices. The slices were permeabilised by incubation for 1 hour with donkey serum. Primary antibodies against NLRP3, caspase-1 or GSDMD were used at 1:200 dilution, against glial fibrillary acidic protein (GFAP), NeuN or Iba1 was used at 1:200 dilution. And nuclei were stained with marker 4’, 6’-diamidino-2-phenylindole (DAPI) at 1:1000 dilution. The incubation with the primary antibodies were overnight at 4 °C and then donkey anti-mouse or anti-rabbit Alexa Fluor 488/555 conjugated secondary antibodies were incubated for 2 hours at room temperature. Images were captured using a confocal scanning microscope (DMi8, Leica, Wetzlar, Germany)49.
Co-immunoprecipitation (Co-IP)
We used technologies of co-immunoprecipitation and subsequent western blotting to check the conjunction level between TCF4 and β-catenin. For immunoprecipitation of TCF4, lysates of mice cerebral cortex (500 μg) were incubated with 20 μg of b-catenin antibody for overnight at 4 °C. Then, 200 μl of washed protein G-agarose bead slurry was added, and the mixture was incubated for another 2 hours at 4 °C. The agarose beads were washed three times with cold phosphate buffer solution (PBS) and collected by pulsed centrifugation (5 seconds in a microcentrifuge at 14,000×g), the supernatant was drained off, and the beads were boiled for 5 minutes. Thereafter, the supernatant was collected by pulsed centrifugation. Then, the protein content was determined by the Bradford method50 using bovine serum albumin (BSA) as the standard again. 100 μg immunoprecipitates were subjected to 10% sodium dodecyl sulfate (SDS)-polyacrylamide gel electrophoresis (PAGE) and followed the next measurements of western blotting49.
Western blotting
Protein expressions of NLRP3, pro-caspase-1, caspase-1, GSDMD, p-GSK3β Ser9, GSK3β, β-catenin, TCF4, p-STAT3, STAT3, UCP2, HSP60, β-actin and Histone H3 were analysed with Western blot performed 5 days after MCAO or sham surgeries. The samples of ischaemic ipsilateral cortex containing 100 μg of protein were added 10% SDS-polyacrylamide gel electrophoresis. After electrophoretic separation the gels were transferred to polyvinylidene fluoride (PVDF) membranes, the membranes were blocked by 5 % skimmed milk powder for 1 hour, and incubated overnight with the primary antibodies, specific to: NLRP3 at 1:1000 dilution, pro-caspase-1 at 1:1000 dilution, caspase-1 at 1:1000 dilution, GSDMD at 1:1000 dilution, p-GSK3β Ser9 at 1:1000 dilution, GSK3β at 1:3000 dilution, ASC at 1:1000 dilution, β-catenin at 1:1000 dilution, p-Foxo3a at 1:1000 dilution, Foxo3a at 1:1000 dilution, TCF4 at 1:1000 dilution, STAT3 at 1:3000 dilution, p-STAT3 at 1:1000 dilution, UCP2 at 1:1000 dilution, HSP60 at 1:3000 dilution, β-actin at 1:3000 dilution and Histone H3 at 1:3000 dilution. After washing, specific binding was detected by horseradish peroxidase-conjugated secondary antibodies. Staining was visualised by electrochemiluminescence (ECL) detection reagents and were analyzed with an Electrophoresis Gel Imaging Analysis System (MF-ChemiBIS 3.2, DNR Bio-Imaging Systems, Israel). Band density was measured with Window AlphaEaseTM FC 32-bit software51.
Real-time PCR
To measure the mRNA of UCP2, the RNA of cerebral cortex was extracted by Trizol reagent (Invitrogen, Carlsbad, CA, USA). Total RNA was reverse transcribed to cDNA by using a reverse transcription reagent kit (Takara, Otsu, Shiga, Japan) in a Robo-cycler thermocycler. Real-time PCR was performed with the LightCycler 480 SYBR Green I Master kit and the products were detected using an a LightCyler 480 instrument. The sequences of Real-time PCR primers used for mRNA quantification were as follows: 5′-TAGTGCGCACCGCAGCC-3′ and 5′-AGCTCATCTG-GCGCTGCAG-3′ for mouse UCP2 and 5′-TGGTGCCAAAAGGGTCATCTCC-3′ and 5′-GCCAGCCCCAGCATCAAAGGTG-3′ for mouse GAPDH. Relative genomic expression was calculated by the 2−ΔΔCt method52,53.
The proteins extraction of cytoplasm and nucleus
The cytoplasm or nuclear proteins were extracted by using the protein extraction kit, according to the manufacturer’s protocol. The collected cortex was cut into small pieces and placed in new pre-cooling microcentrifuge tubes. Then, 200 μl mixture solution of cytoplasmic extraction reagent A and B was added, and the tissues were grinded into homogenate. All sample tubes were placed in an ice-bath and rest for 10 minutes. 10 μl cytoplasmic extraction reagent B was added again and the sample was vortexed and centrifugated at 15,000×g, 4 °C for 5 minutes. After centrifugation, the cytoplasmic extract in supernatant was immediately transferred to a new pre-cooled tube, and the sediment was suspended with 50 μl nuclear extraction reagent. The sediment was vortexed for 30 seconds. Then, the sample tubes were put back into the ice bath and vortexed for 30 seconds every 2 minutes, keeping 30 minutes. Centrifuging the sample tubes at 15,000×g, 4 °C for 10 min, the supernatant was obtained as nuclear extract.
Mitochondria isolation
Mitochondria isolation and fractionation was conducted by using the mitochondria extraction kit, according to the manufacturer’s protocol. Fresh cerebral cortex separated from mice brain were homogenised with a glass homogeniser in cold lysis buffer. Then, the homogenates were centrifuged at 800×g, 4 °C for 5 min. After centrifugation, the supernatant was slowly transferred to a new pre-cooled tube, which pre-added with 0.5 ml extraction reagent A. To centrifuge the sample tubes at 15,000×g, 4 °C for 10 min, the supernatant was obtained as cytoplasm extract. The sediment was suspended with 200 ml wash buffer, then centrifuged at 15,000×g, 4 °C for 10 min again. To dispose the supernatant, the sediment was obtained as mitochondria and resuspended with 100 μl storage buffer and kept under -80 °C.
ROS detection
To assay the ROS level, a commercial ROS assay kit was used and operated as the protocols. To conduct the experiment, cerebral cortex of mice was homogenised with 1 ml buffer reagent A by using a glass homogeniser. The homogenates were centrifuged at 15,000×g, 4 °C for 10 min. 190 μl supernatant of tissue homogenates and 10 μl fluorescence dye 2′,7′-dichlorodihydrofluorescin diacetate (DCFH-DA) were co-incubated in 96 well plate for 30 minutes at 37 °C. Finally, the fluorescence intensity of each well was measured using a fluorescence microplate reader (Infinite M200 Pro, Hombrechtikon, Swiss). For fluorescence detection, the excitation wavelength was at 488 nm, and the emission peak was examined at 525 nm.
ELISA assays
Cytokine levels of IL-1b and IL-18 in cortex were determined in duplicate following ELISA assay instructions provided by the manufacturers. The optical density (OD) of each microwell was measured at 450 nm using a microplate reader. The minimum detection limits for mouse IL-1b and mouse IL-18 were 31.2 pg/ml and 8 pg/ml, respectively.
Sorting neural cells through fluorescence activated cell sorter (FACS)
To measure the protein expressions of NLRP3 inflammasome and GSDMD, B6.Cg-Tg(Thy1-YFP)HJrs/J transgenic mice were used for isolating neurones, FVB/N-Tg(GFAPGFP)14Mes/J mice were used for isolating astrocytes, wild type mice were used for sorting microglia by using Iba-1 primary antibody and the associated Alexa Fluor 488 secondary antibody. A single-cell suspension from the cortex was prepared. The cortices from three mice were pooled for one sample. Wavelengths of 488 nm and 530/30 nm were used for GFP or YFP excitation and emission, respectively. The labelled cells were sorted and collected using the BD FACSAria Cell Sorting System (35 psi sheath pressure, FACSDiva software S/W 2.2.1; BD Biosciences, San Jose´, CA)45.
TUNEL measurements
The aneasthetised mice were perfused tarnscardially with 4% paraformaldehyde (PFA) for 15 minutes. The brain tissue was fixed by immersion in 4% paraformaldehyde and cut into 60 μm slices. Apoptosis in ischaemic penumbra area of cerebral cortex was detected via TUNEL assay kit, as the manufacturer’s protocol. Then, the slices were stained with the neuron marker NeuN at 1:200 dilution followed by incubation with DAPI solution at 1:1000. Images were captured with a confocal scanning microscope (DMi8, Leica, Wetzlar, Germany). The apoptotic cells were calculated as a percentage of the TUNEL-positive cells in the NeuN-positive cells49.
Infarct volume measurement
Mice were executed and each brain was cut into coronal slices (2 mm thick) with a brain-cutting matrix. The slices were stained with 1% 2,3,5-triphenyltetrazolium chloride (TTC) at 37 °C for 10 min in the dark. Normal tissues were stained (red) and infarct tissues were not stained (white). The slices were mounted to a dry black paper and photographed with a video microscopy (Chensheng Optical, Shenzhen, China). The percentage of the infarct volume in the whole brain was calculated and represented as the ischaemic extent.
Magnetic resonance imaging (MRI)
We performed in vivo MRI experiments on Signa 3.0T HDxt system (GE Healthcare, Fairfield, Connecticut, USA). Mice were anaesthetised with ketamine (80 mg/kg, i.p.) and xylazine (10 mg/kg, i.p.) and put on an animal scanning bed. T2 weighted (T2 wt) images were collected by using a fast-spin-echo (FSE) T2-weighted sequence with the following parameters: echo time/repetition time = 85.46/ 4620 ms, field of view = 40 mm × 40 mm, 10 slices with 1.5 mm slice thickness, in-plane resolution of 512 × 512 pixel, and an imaging time of 12 minutes54.
Behavioural tests
Mice were subjected to behavioural tests as shown in supplementary figure 1, the test sequences were randomly assigned to avoid interference from different test. Behavioural tests were recorded, stored, and analyzed by using the SMART™ tracking software program (Panlab, SL, Barcelona, Spain). The apparatus was cleaned with 25% ethanol solution after each test.
Neurological scores (NST)
To assess neurobehavioral deficits of MCAO mice, the 21 points Garcia Score were used. Neurological outcomes of mice were assessed by a blinded observer at 7 days, 14 days, 21 days and 28 days after building MCAO. The 21 points Garcia Score is a sensorimotor assessment system consisting of seven tests with scores of 0-3 for each test. These seven tests included: (i) spontaneous activity, (ii) side stroking, (iii) vibris touch, (iv) limb symmetry, (v) climbing, (vi) lateral turning, and (vii) forelimb walking55.
Rotating rod test (RRT)
Each mouse was placed on a rotating bar, which was set to a rotation speed of up to 20 rpm during the test. The time spent on the rotating bar was recorded as the latent period. The latency before falling was recorded using a stop-watch, with a maximum of 90 seconds. Time of staying on rotating rod was used to assess motor balance ability56.
Pole test (PT)
Each mouse was paced head-upward on the top of a vertical rough-surfaced pole (diameter 1 cm; height 55 cm). The turn downward from the top of pole (T-turn time) and the descend to the floor (T-LA) time was recorded57.
Open field test (OFT)
The mice were pre-trained to familiar with the environment. Mice were trained at 26 and 27 days after MCAO operation. At 28 days, formal test was performed. Both in training and testing phase, each mouse was placed in an open field box (40 cm × 40 cm white floor with black plastic walls 30 cm in height) and allowed to explored for 6 minutes. Total travel distance was recorded (mm) and used to assess the capacity of mobility46.
8 arms maze test
The maze was composed of a central platform (32 cm in diameter) from which radiated eight identical arms (50 cm long and 12 cm wide). The entrance to each arm of the maze was controlled by sliding doors that could be controlled manually by an experimenter. Each arm was terminated by a small well in which food rewards were delivered. The food rewards were single feed pallets. Mice were habituated for 2 days. During habituation, single feed pellets were placed in the small well located at the terminal ends of each arm. At the beginning of each habituation trial, mice were placed in the central platform of 8-arm maze and explored for 15 seconds. Then, all doors opened to allow mice to freely explore the maze. Mice that took all baits within a 10 minutes trial by the last day of habituation were advanced to the training phase. During training, single feed pellets were placed in terminal well of four arms (arms 2, 3, 6 and 7 in clockwise fashion). The baited arms and never-baited arms were kept constant throughout the whole training and testing phase. Working memory error (WME) is defined as re-entering the baiting arm, and reference memory error (RME) is defined as entering the non-baiting arm for the first time. If the WME frequency is zero within five consecutive training trials and the RME is one time or less, the training is considered successful. The mice were trained at 21 days after MCAO operations. Mice with or without MCAO treatments were training for 7 days and performed formal testing at 27 to 28 days after building MCAO model. WME and RME were calculated58.
Sucrose preference test (SPT)
The sucrose preference test was performed 27 days after MCAO. After the deprivation of food and water for 12 hours, mice were provided with two pre-weighted bottles, including one bottle that contained 2.5 % sucrose solution and a second bottle filled with water, for 2 hours. The percentage preference was calculated according to the following formula: sucrose intake percentage % = [sucrose intake / (sucrose + water intake)] plus 100 %]59.
Tail Suspension Test (TST)
Mice were suspended by their tails at 20 cm from ground for 6 minutes. The time of immobility was recorded46.
Statistics and Reproducibility
For statistical analysis we used one-way analysis of variance (ANOVA) followed by a Tukey’s or Dunnett’s post hoc multiple comparison test for unequal replications using GraphPad Prism 8 software (GraphPad Software Inc., La Jolla, CA) and SPSS 24 software (International Business Machines Corp., NY, USA). The differences among multiple groups were analyzed by two-way ANOVA followed by a Tukey post hoc multiple comparison test. All statistical data in the text are presented as the mean ± SD, the value of significance was set at p < 0.05.