[1] S. Azim, S. Gangopadhyay, S.S. Mahapatra, R. Mittal, R.K. Singh, Role of PVD coating on wear and surface integrity during environment-friendly micro-drilling of Ni-based superalloy, Journal of Cleaner Production 272 (2020) 122741, https://doi.org/10.1016/j.jclepro.2020.122741.
[2] M.S. Zoei, M.H. Sadeghi, M. Salehi, Effect of grinding parameters on the wear resistance and residual stress of HVOF-deposited WC-10Co-4Cr coating, Surface & Coatings Technology 307 (2016) 886-891, https://doi.org/10.1016/j.surfcoat.2016.09.067
[3] K.-D. Bouzakis, P. Charalampous, T. Kotsanis, G. Skordaris, E. Bouzakis, B. Denkena, B. Breidenstein, J.C. Aurich, M. Zimmermann, T. Herrmann, R. M’saoubi, Effect of HM substrates’ cutting edge roundness manufactured by laser machining and micro-blasting on the coated tools’ cutting performance, CIRP Journal of Manufacturing Science and Technology 18 (2017) 188-197, https://doi.org/10.1016/j.cirpj.2017.02.003.
[4] E.E. Yunata, T. Aizawa, K. Tamaoki, M. Kasugi, Plasma polishing and finishing of cvd-diamond coated WC (Co) dies for dry stamping, Procedia Engineering 207 (2017) 2197-2202, https://doi.org/10.1016/j.proeng.2017.10.981.
[5] Y. Qin, H. Zhao, C. Li, J. Lu, J. He, Effect of heat treatment on the microstructure and corrosion behaviors of reactive plasma sprayed TiCN coatings, Surface and Coatings Technology 398 (2020) 126086, https://doi.org/10.1016/j.surfcoat.2020.126086.
[6] R. Giti, S. Haghdoost, E. Ansarifard, Effect of different coloring techniques and surface treatment methods on the surface roughness of monolithic zirconia, Dental Research Journal 17 (2020) 152-161, https://doi.org/10.4103/1735-3327.280893.
[7] A. Jacoba, S. Gangopadhyay, A. Satapathy, S.Mantry, B.B. Jhab.. “Influences of micro sandblasting as surface treatment technique on properties and performance of the AlTiN coated tools, Journal of Manufacturing Processes 29 (2017) 407-418, https://doi.org/10.1016/j.jmapro.2017.08.013.
[8] K.-D. Bouzakis, F. Klocke, G. Skordaris, E. Bouzakis, S. Gerardis, G. Katirtzoglou, S. Makrimallakis, Influence of dry micro-blasting grain quality on wear behaviour of TiAlN coated tools, Wear 271 (2011) 783-791, https://doi.org/10.1016/j.wear.2011.03.010.
[9] K.-D. Bouzakis, G. Skordaris, E. Bouzakis, A. Tsouknidas, S. Makrimallakis, S. Gerardis, G. Katirtzoglou, Optimization of wet micro-blasting on PVD films with various grain materials for improving the coated tools’ cutting performance, CIRP Annals - Manufacturing Technology 60 (2011) 587-590, https://doi.org/10.1016/j.cirp.2011.03.012.
[10] S.B. Abusuilik, K. Inoue, Effects of intermediate surface treatments on corrosion resistance of cathodic arc PVD hard coatings, Surface and Coatings Technology 237 (2013) 421-428, https://doi.org/10.1016/j.surfcoat.2013.09.026.
[11] S.B. Abusuilik, Pre-, intermediate, and post-treatment of hard coatings to improve their performance for forming and cutting tools, Surface and Coatings Technology 284 (2015) 384-395, https://doi.org/10.1016/j.surfcoat.2015.07.003.
[12] C. Petrogalli, L. Montesano, A. Pola, M. Gelfi, A. Ghidini, G.M. LaVecchiaa, Improvement of Fatigue Resistance of a Tool Steel by Surface Treatments, Procedia Engineering 109 (2015) 154-161, https://doi.org/10.1016/j.proeng.2015.06.227.
[13] S. Tanaka, T. Shirochi, H. Nishizawa, K. Metoki, H. Miura, H. Hara, T. Takahashi, Micro-blasting effect on fracture resistance of PVD-AlTiN coated cemented carbide cutting tools, Surface and Coatings Technology 308 (2016) 337-340, https://doi.org/10.1016/j.surfcoat.2016.07.094.
[14] C. Puneet, K. Valleti, A.V. Gopal, Influence of surface preparation on the tool life of cathodic arc PVD coated twist drills, Journal of Manufacturing Processes 27 (2017) 233-240, https://doi.org/10.1016/j.jmapro.2017.05.011.
[15] C. Liu, Z. Liu, B. Wang, Modification of surface morphology to enhance tribological properties for CVD coated cutting tools through wet micro blasting post-process, Ceramics International 44 (2018) 3430-3439, https://doi.org/10.1016/j.ceramint.2017.11.142.
[16] T. Shen, L. Zhu, Z. Liu, Effect of micro-blasting on the tribological properties of TiN/MT-TiCN/Al2O3 /TiCNO coatings deposited by CVD, International Journal of Refractory Metals and Hard Materials 88 (2020) 105205, https://doi.org/10.1016/j.ijrmhm.2020.105205.
[17] R. Mundotia, D.C. Kothari, A. Kale, U. Mhatre, K. Date, N. Thorat, T. Ghorudea, Effect of ion bombardment and micro sandblasting on the wear resistance properties of hard TiN coatings, Materials Today: Proceedings 26 (2020) 603-612, https://doi.org/10.1016/j.matpr.2019.12.171.
[18] L. Faksa, W. Daves, W. Ecker, T. Klünsner, M. Tkadletz, C. Czettl, Effect of shot peening on residual stresses and crack closure in CVD coated hard metal cutting inserts, International Journal of Refractory Metals and Hard Materials 82 (2019) 174-182, https://doi.org/10.1016/j.ijrmhm.2019.04.008.
[19] D.P. Gruber, D. Kiefer, R. Rössler, F. Beckmann, M. Tkadletz, T. Klünsner, C. Czettl, J. Keckes, and J. Gibmeier, 20 Hz synchrotron X-ray diffraction analysis in laser-pulsed WC-Co hard metal reveals oscillatory stresses and reversible composite plastificationm, International Journal of Refractory Metals and Hard Materials, 82 (2019) 121-128. https://doi.org/10.1016/j.ijrmhm.2019.04.004.
[20] Thakur, R.K., and K.K. Singh, Experimental investigation and optimization of abrasive water jet machining parameter on multi-walled carbon nanotube doped epoxy/carbon laminate, Measurement 164 (2020) 108093 https://doi.org/10.1016/j.measurement.2020.108093.
[21] Bouzakis, K.-D., S. Makrimallakis, G. Katirtzoglou, G. Skordaris, S. Gerardis, E. Bouzakis, T. Leyendecker, S. Bolz, and W. Koelkerc, Adaption of graded Cr/CrN-interlayer thickness to cemented carbide substrates' roughness for improving the adhesion of HPPMS PVD films and the cutting performance, Surface and Coatings Technology 205 (2010) 1564–1570. https://doi.org/10.1016/j.surfcoat.2010.09.010.
[22] R. Melentiev, F. Fang, Investigation of erosion temperature in micro-blasting, Wear 420-421 (2019) 123-132. https://doi.org/10.1016/j.wear.2018.12.073.