[1] Inzana JA, Olvera D, Fuller SM, et al. 3D printing of composite calcium phosphate and collagen scaffolds for bone regeneration. Biomaterials 2014, 35: 4026–4034.
[2] Sun C, Tian X, Wang L. Effect of Particle Size Gradation on the Performance of Glass-Ceramic 3D Printing Process. Ceram Int 2016, 43: 578–584.
[3] Butscher A, Bohner M, Roth C, et al. Printability of calcium phosphate powders for three-dimensional printing of tissue engineering scaffolds. Acta Biomater 2012, 8: 373–385.
[4] Pighinelli L, Kucharska M. Chitosan-hydroxyapatite composites. Carbohydr Polym 2013, 93: 256–262.
[5] Madrid APM, Vrech SM, Sanchez MA, et al. Advances in additive manufacturing for bone tissue engineering scaffolds. Mater Sci Eng C 2019, 100: 631–644.
[6] Kumar A, Mandal S, Barui S, et al. Low temperature additive manufacturing of three dimensional scaffolds for bone-tissue engineering applications: Processing related challenges and property assessment. Mater Sci Eng R Reports 2016, 103: 1–39.
[7] Castilho M, Gouveia B, Pires I, et al. The role of shell/core saturation level on the accuracy and mechanical characteristics of porous calcium phosphate models produced by 3Dprinting. Rapid Prototyp J 2015, 21: 43–55.
[8] Khalyfa A, Vogt S, Weisser J, et al. Development of a new calcium phosphate powder-binder system for the 3D printing of patient specific implants. J Mater Sci Mater Med 2007, 18: 909–916.
[9] Lee M, Dunn JCY, Wu BM. Scaffold fabrication by indirect three-dimensional printing. Biomaterials 2005, 26: 4281–4289.
[10] Leukers B, Gulkan H, Irsen S, et al. Biocompatibility of ceramic scaffolds for bone replacement made by 3D printing. Materwiss Werksttech 2005, 36: 781–787.
[11] Seyed Shirazi SF, Gharekhani S, Mehrali M, et al. A review on powder-based additive manufacturing for tissue engineering: selective laser sintering and inkjet 3D printing. Sci Technol Adv Mater 2015, 16: 033502.
[12] Trombetta R, Inzana JA, Schwarz EM, et al. 3D Printing of Calcium Phosphate Ceramics for Bone Tissue Engineering and Drug Delivery. Ann Biomed Eng 2017, 45: 23–44.
[13] Chai W, Wei Q, Yang M, et al. The printability of three water based polymeric binders and their effects on the properties of 3D printed hydroxyapatite bone scaffold. Ceram Int 2019, 46: 6663–6671.
[14] Díaz-Moreno CA, Lin Y, Hurtado-Macias A, et al. Binder jetting additive manufacturing of aluminum nitride components. Ceram Int 2019, 45: 13620–13627.
[15] Du W, Ren X, Ma C, et al. Binder Jetting Additive Manufacturing of Ceramics: A Literature Review. Int Mech Eng Congr 2018.
[16] Fu Z, Schlier L, Travitzky Net al. Three-dimensional printing of SiSiC lattice truss structures. Mater Sci Eng A 2013, 560: 851–856.
[17] Yin X, Travitzky N, Greil P. Near-Net-Shape Fabrication of Ti3AlC2 -Based Composites. Int J Appl Ceram Technol 2007, 190: 184–190.
[18] Nan B, Yin X, Zhang L, et al. Three-Dimensional Printing of Ti3SiC2 -Based Ceramics. J Am Ceram Soc 2011, 94: 969–972.
[19] Melcher R, Travitzky N, Zollfrank C, et al. 3D printing of Al2O3/Cu-O interpenetrating phase composite. J Mater Sci 2011, 46: 1203–1210.
[20] Winkel A, Meszaros R, Reinsch S, et al. Sintering of 3D-Printed Glass/HAp Composites. J Am Ceram Soc 2012, 95: 3387–3393.
[21] Suwanprateeb J, Sanngam R, Panyathanmaporn T. Influence of raw powder preparation routes on properties of hydroxyapatite fabricated by 3D printing technique. Mater Sci Eng C 2010, 30: 610–617.
[22] Suwanprateeb J, Sanngam R, Suwanpreuk W. Fabrication of bioactive hydroxyapatite / bis-GMA based composite via three dimensional printing. J Mater Sci Mater Med 2008, 19: 2637–2645.
[23] Suwanprateeb J, Thammarakcharoen F, Hobang N. Enhancement of mechanical properties of 3D printed hydroxyapatite by combined low and high molecular weight polycaprolactone sequential infiltration. J Mater Sci Mater Med 2016, 27: 171.
[24] Li X, Yuan Y, Liu L, et al. 3D printing of hydroxyapatite / tricalcium phosphate scaffold with hierarchical porous structure for bone regeneration. Bio-Design Manuf 2019, 3: 15–29.
[25] Kumar A, Nune KC, Misra RDK. Biological functionality of extracellular matrix-ornamented three-dimensional printed hydroxyapatite scaffolds. J Biomed Mater Res Part A 2016, 104: 1343–1351.
[26] Goncalves EM, Oliveira FJ, Silva RF, et al. Three-dimensional printed PCL-hydroxyapatite scaffolds filled with CNTs for bone cell growth stimulation. J Biomed Mater Res Part B 2015, 104: 1210–9.
[27] Suwanprateeb J, Sanngam R, Suvannapruk W, et al. Mechanical and in vitro performance of apatite – wollastonite glass ceramic reinforced hydroxyapatite composite fabricated by 3D-printing. J Mater Sci Mater Med 2009, 20: 1281–1289.
[28] Spath S, Drescher P, Seitz H. Impact of Particle Size of Ceramic Granule Blends on Mechanical Strength and Porosity of 3D Printed Scaffolds. Materials (Basel) 2015, 8: 4720–4732.
[29] Zhang H, Mao X, Du Z, et al. Three dimensional printed macroporous polylactic acid / hydroxyapatite composite scaffolds for promoting bone formation in a critical-size rat calvarial defect model. Sci Technol Adv Mater 2016, 17: 136–148.
[30] Wang YE, Li XP, Li CC, et al. Binder droplet impact mechanism on a hydroxyapatite microsphere surface in 3D printing of bone scaffolds. J Mater Sci 2015, 50: 5014–5023.
[31] Cox SC, Thornby JA, Gibbons GJ, et al. 3D printing of porous hydroxyapatite scaffolds intended for use in bone tissue engineering applications. Mater Sci Eng C 2015, 47: 237–247.
[32] Suwanprateeb J, Thammarakcharoen F, Wasoontararat K, et al. Influence of printing parameters on the transformation efficiency of 3D-printed plaster of paris to hydroxyapatite and its properties. Rapid Prototyp J 2012, 18: 490–499.
[33] Vasireddi R, Basu B. Conceptual design of three-dimensional scaffolds of powder-based materials for bone tissue engineering applications. Rapid Prototyp J 2015, 21: 716–724.
[34] Lv X, Ye F, Cheng L, et al. Binder jetting of ceramics : Powders , binders , printing parameters, equipment, and post-treatment, Ceram Int 2019, 45: 12609–12624.
[35] Bai Y, Wagner G, Williams CB. Effect of Particle Size Distribution on Powder Packing and Sintering in Binder Jetting Additive Manufacturing of Metals. J Manuf Sci Eng 2017, 139: 081019.
[36] Luo Y, Teng Z, Wang X, et al. Development of carboxymethyl chitosan hydrogel beads in alcohol-aqueous binary solvent for nutrient delivery applications. Food Hydrocoll 2013, 31: 332–339.
[37] DIN EN 725-8. Advanced technical ceramics – methods of test for ceramic powders – part 8: determination of tapped bulk density. 2006.
[38] DIN EN 725-9. Advanced technical ceramics – methods of test for ceramic powders – part 9: determination of untapped bulk density. 2006.
[39] Spierings AB, Levy G. Comparison of Density of Stainless Steel 316L parts produced with Selective Laser Melting using Different Powder Grades. SFF Symp 2009, 1–12.
[40] Zocca A, Gomes CM, Mühler T, et al. Powder-bed stabilization for powder-based additive manufacturing. Adv Mech Eng 2014, 6: 491581.
[41] Castilho M, Rodrigues J, Pires I, et al. Fabrication of individual alginate-TCP scaffolds for bone tissue engineering by means of powder printing. Biofabrication 2015, 7: 015004.
[42] Richerson D. Modern Ceramic Engineering: Properties, Processing, and Use in Design. CRC Press, 3rd editition, 2005.
[43] Spierings AB, Herres N, Levy G. Influence of the particle size distribution on surface quality and mechanical properties in additive manufactured stainless steel parts. Solid Free Fabr 2011, 17: 195–202.
[44] Tan JH, Wong WLE, Dalgarno KW. An overview of powder granulometry on feedstock and part performance in the selective laser melting process. Addit Manuf 2017, 18: 228–255.
[45] Teodorescu M, Bercea M. Poly(vinylpyrrolidone) – A Versatile Polymer for Biomedical and Beyond Medical Applications. Polym – Plast Technol Eng 2015, 54: 923–943.
[46] Fernandes TJ, Mavropoulos E, Campos GB, et al. PVP Addition during Hydroxyapatite Synthesis: Effect on Albumin Adsorption. Key Eng Mater 2011, 493–494: 757–762.
[47] Zhou P, Qi H, Zhu Z, et al. Development of SiC/PVB Composite Powders for Selective Laser Sintering Additive Manufacturing of SiC. Materials (Basel) 2018, 11: 2012.
[48] Hayama M, Yamamoto KI, Kohori F, et al. Nanoscopic behavior of polyvinylpyrrolidone particles on polysulfone/polyvinylpyrrolidone film. Biomaterials 2004, 25: 1019–1028.
[49] Liu J. BINDER COMPOSITION. U.S. patent 0189405, Dec. 2002.
[50] Xue W, Bandyopadhyay A, Bose S. Polycaprolactone coated porous tricalcium phosphate scaffolds for controlled release of protein for tissue engineering. J Biomed Mater Res - Part B Appl Biomater 2009, 91: 831–838.
[51] Wei Q, Wang Y, Li X, et al. Study the bonding mechanism of binders on hydroxyapatite surface and mechanical properties for 3DP fabrication bone scaffolds. J Mech Behav Biomed Mater 2016, 57: 190–200.
[52] Jacob G, Brown CU, Donmez MA. The influence of spreading metal powders with different particle size distributions on the powder bed density in laser-based powder bed fusion processes. Natl Inst Stand Technol 2018.
[53] Zhao X, Yim CH, Du N, et al. Crosslinked Chitosan Networks as Binders for Silicon/Graphite Composite Electrodes in Li-Ion Batteries. J Electrochem Soc 2018, 165: A1110–A1121.
[54] Okada T, Nobunaga Y, Konishi T, et al. Preparation of chitosan-hydroxyapatite composite mono-fiber using coagulation method and their mechanical properties. Carbohydr Polym 2014, 175: 355–360.
[55] Chavanne P, Stevanovic S, Wüthrich A, et al. 3D printed chitosan / hydroxyapatite scaffolds for potential use in regenerative medicine. Biomed Tech 2013, 58.