[1] Xu, Z., Shi, X., Zhai, W., Yao, J., Song, S., & Zhang, Q. (2014). Preparation and tribological properties of TiAl matrix composites reinforced by multilayer graphene. Carbon, 67, 168-177.
[2] Paul, M. C., Sobon, G., Sotor, J., Abramski, K. M., Jagiello, J., Kozinski, R., . . . Pal, M. (2013). A graphene-based mode-locked nano-engineered zirconia–yttria–aluminosilicate glass-based erbium-doped fiber laser. 23(3), 035110.
[3] Hu, Y., Wang, H., & Cong, W. (2019). Laser Deposition-Additive Manufacturing of Graphene Oxide Reinforced IN718 Alloys: Effects on Surface Quality, Microstructure, and Mechanical Properties. In ASME 2019 14th International Manufacturing Science and Engineering Conference. American Society of Mechanical Engineers Digital Collection.
[4] Tubio, C. R., Rama, A., Gómez, M., del Río, F., Guitián, F., & Gil, A. (2018). 3D-printed graphene-Al2O3 composites with complex mesoscale architecture. Ceramics International, 44(5), 5760-5767.
[5] Yannopoulos, S. N., Siokou, A., Nasikas, N. K., Dracopoulos, V., Ravani, F., & Papatheodorou, G. N. (2012). CO2‐Laser‐Induced Growth of Epitaxial Graphene on 6H‐SiC (0001). Advanced Functional Materials, 22(1), 113-120.
[6] Fan, Y., Wang, L., Li, J., Li, J., Sun, S., Chen, F., . . . Jiang, W. (2010). Preparation and electrical properties of graphene nanosheet/Al2O3 composites. Carbon, 48(6), 1743-1749.
[7] Liu, X., Fan, Y. C., Li, J. L., Wang, L. J., & Jiang, W. (2015). Preparation and mechanical properties of graphene nanosheet reinforced alumina composites. Advanced Engineering Materials, 17(1), 28-35.
[8] Ragulya, A. (2008). Consolidation of ceramic nanopowders. Advances in Applied Ceramics, 107(3), 118-134.
[9] Bonifacio, C. S., Holland, T. B., & van Benthem, K. (2013). Evidence of surface cleaning during electric field assisted sintering. Scripta Materialia, 69(11-12), 769-772.
[10] Luton, M., Jayanth, C., Disko, M., Matras, S., & Vallone, J. (1988). Cryomilling of nano-phase dispersion strengthened aluminum. MRS Online Proceedings Library Archive, 132.
[11] Huang, B., Perez, R., & Lavernia, E. (1998). Grain growth of nanocrystalline Fe–Al alloys produced by cryomilling in liquid argon and nitrogen. Materials Science Engineering: A, 255(1-2), 124-132.
[12] Singh, V., Joung, D., Zhai, L., Das, S., Khondaker, S. I., & Seal, S. (2011). Graphene based materials: past, present and future. Progress in Materials Science, 56(8), 1178-1271.
[13] Yazdani, B., Xia, Y., Ahmad, I., & Zhu, Y. (2015). Graphene and carbon nanotube (GNT)-reinforced alumina nanocomposites. Journal of the European Ceramic Society, 35(1), 179-186.
[14] Compton, O. C., & Nguyen, S. T. (2010). Graphene oxide, highly reduced graphene oxide, and graphene: versatile building blocks for carbon‐based materials. small, 6(6), 711-723.
[15] Liu, P., & Zhang, Y. (2011). A theoretical analysis of frictional and defect characteristics of graphene probed by a capped single-walled carbon nanotube. Carbon, 49(11), 3687-3697.
[16] Hu, Z., Tong, G., Lin, D., Nian, Q., Shao, J., Hu, Y., . . . Cheng, G. J. (2016). Laser sintered graphene nickel nanocomposites. Journal of Materials Processing Technology, 231, 143-150.
[17] Hu, Z., Wang, D., Chen, C., Wang, X., Chen, X., & Nian, Q. (2019). Bulk titanium–graphene nanocomposites fabricated by selective laser melting. Journal of Materials Research, 34(10), 1744-1753.
[18] Hu, Z., Chen, F., Xu, J., Ma, Z., Guo, H., Chen, C., . . . Zhang, M. (2018). Fabricating graphene-titanium composites by laser sintering PVA bonding graphene titanium coating: Microstructure and mechanical properties. Composites Part B: Engineering, 134, 133-140.
[19] Prabhakaran, S., Kumar, H. P., Kalainathan, S., Vasudevan, V. K., Shukla, P., & Lin, D. (2019). Laser shock peening modified surface texturing, microstructure and mechanical properties of graphene dispersion strengthened aluminium nanocomposites. Surfaces Interfaces 14, 127-137.
[20] Feng, H., Cheng, R., Zhao, X., Duan, X., & Li, J. (2013). A low-temperature method to produce highly reduced graphene oxide. Nature communications, 4(1), 1-8.
[21] Marcano, D. C., Kosynkin, D. V., Berlin, J. M., Sinitskii, A., Sun, Z., Slesarev, A., . . . Tour, J. M. (2010). Improved synthesis of graphene oxide. ACS nano, 4(8), 4806-4814.
[22] Huang, L., Geng, L., & Peng, H. (2015). Microstructurally inhomogeneous composites: is a homogeneous reinforcement distribution optimal? Progress in Materials Science, 71, 93-168.
[23] Hu, Z., Tong, G., Nian, Q., Xu, R., Saei, M., Chen, F., . . . Xu, J. (2016). Laser sintered single layer graphene oxide reinforced titanium matrix nanocomposites. Composites Part B: Engineering, 93, 352-359.
[24] Boniecki, M., Gołębiewski, P., Wesołowski, W., Woluntarski, M., Piątkowska, A., Romaniec, M., . . . Krzyżak, K. (2017). Alumina/zirconia composites toughened by the addition of graphene flakes. Ceramics International, 43(13), 10066-10070.
[25] Lin, D., Liu, C. R., & Cheng, G. J. (2014). Single-layer graphene oxide reinforced metal matrix composites by laser sintering: Microstructure and mechanical property enhancement. Acta Materialia, 80, 183-193.
[26] Huang, X., Yin, R., Qian, L., Zhao, W., Liu, H., Liu, C., . . . Guo, Z. (2019). Processing conditions dependent tunable negative permittivity in reduced graphene oxide-alumina nanocomposites. Ceramics International, 45(14), 17784-17792.
[27] Farshidianfar, M. H., Khajepour, A., & Gerlich, A. P. (2016). Effect of real-time cooling rate on microstructure in laser additive manufacturing. Journal of Materials Processing Technology, 231, 468-478.
[28] Zhang, X., Song, F., Wei, Z., Yang, W., & Dai, Z. (2017). Microstructural and mechanical characterization of in-situ TiC/Ti titanium matrix composites fabricated by graphene/Ti sintering reaction. Materials Science and Engineering: A, 705, 153-159.
[29] Fouilland-Paille, L., Ettaqi, S., Benayoun, S., & Hantzpergue, J. (1997). Structural and mechanical characterization of Ti/TiC cermet coatings synthesized by laser melting. Surface and Coatings Technology, 88(1-3), 204-211.
[30] Taylor, J., Dinsdale, A., Hilleit, M., & Selleby, M. (1992). A Critical assessment of tnermodynamic and phase diagram data for the Al-O system. Calphad, 16(2), 173-179.
[31] Lakiza, S. M., & Lopato, L. M. (1997). Stable and metastable phase relations in the system alumina–zirconia–yttria. Journal of the American Ceramic Society, 80(4), 893-902.
[32] Pei, S., & Cheng, H.-M. (2012). The reduction of graphene oxide. Carbon, 50(9), 3210-3228.
[33] Wu, W. (2010). Dissolution precipitation mechanism of TiC/Ti composite layer produced by laser cladding. Materials Science and Technology, 26(3), 367-370.
[34] Man, H., Zhang, S., Cheng, F., & Yue, T. (2001). Microstructure and formation mechanism of in situ synthesized TiC/Ti surface MMC on Ti-6Al-4V by laser cladding. Scripta Materialia, 44(12), 2801.
[35] Barnett, M., Keshavarz, Z., Beer, A., & Atwell, D. (2004). Influence of grain size on the compressive deformation of wrought Mg–3Al–1Zn. Acta materialia, 52(17), 5093-5103.