[1] C. Liao, W. Huang, and J. Wu, “Hydrogen production from semiconductor-based photocatalysis via water splitting,” Catalysts, vol. 2, no. 4, pp. 490–516, 2012.
[2] Y. AlIssa, SM Hamidi, A. Shahnazi, M. Nabid, One dimensional efficient photocatalyst based on plasmonic grating, Opt. Quantum electronics, 53:355, 2021.
[3] M. A. Fox and M. T. Dulay, “Heterogeneous photocatalysis,” Chem. Rev., vol. 93, no. 1, pp. 341–357, 1993.
[4] J. Schneider, M. Matsuoka, M. Takeuchi, J. Zhang, Y. Horiuchi, M. Anpo, and W. Bahnemann, “Understanding TiO2 photocatalysis: mechanisms and materials,” Chem. Rev., vol. 114, no. 19, pp. 9919–9986, 2014.
[5] L. Sang, Y. Zhao, and C. Burda, “TiO2 nanoparticles as functional building blocks,” Chem. Rev., vol. 114, no. 19, pp. 9283–9318, 2014.
[6] S. Konstas, I. Konstantinou, D. Petrakis, and T. Albanis, “Development of SrTiO3 photocatalysts with visible light response using amino acids as dopant sources for the degradation of organic pollutants in aqueous systems,” Catalysts, vol. 8, no. 11, p. 528, 2018.
[7] J. Shen, S. Wang, D. Wang, X. Shi, J. Zhang, F. Han, H. Li, “Composite Sr2 TiO4/SrTiO3 (La, Cr) heterojunction based photocatalyst for hydrogen production under visible light irradiation,” J. Mater. Chem. A, vol. 1, no. 27, pp. 7905–7912, 2013.
[8] T. Alammar, I. Hamm, M. Wark, and A.-V. Mudring, “Low-temperature route to metal titanate perovskite nanoparticles for photocatalytic applications,” Appl. Catal. B Environ., vol. 178, pp. 20–28, 2015.
[9] K. Van Benthem, C. Elsässer, and R. H. French, “Bulk electronic structure of SrTiO3: Experiment and theory,” J. Appl. Phys., vol. 90, no. 12, pp. 6156–6164, 2001.
[10] Y. Yamada and Y. Kanemitsu, “Band-to-band photoluminescence in SrTiO3,” Phys. Rev. B, vol. 82, no. 12, p. 121103, 2010.
[11] Z. Jiang, T. Xiao, V. áL Kuznetsov, and P. áP Edwards, “Turning carbon dioxide into fuel,” Philos. Trans. R. Soc. A Math. Phys. Eng. Sci., vol. 368, no. 1923, pp. 3343–3364, 2010.
[12] R. Konta, T. Ishii, H. Kato, and A. Kudo, “Photocatalytic activities of noble metal ion doped SrTiO3 under visible light irradiation,” J. Phys. Chem. B, vol. 108, no. 26, pp. 8992–8995, 2004.
[13] T. Puangpetch, S. Chavadej, and T. Sreethawong, “Hydrogen production over Au-loaded mesoporous-assembled SrTiO3 nanocrystal photocatalyst: effects of molecular structure and chemical properties of hole scavengers,” Energy Convers. Manag., vol. 52, no. 5, pp. 2256–2261, 2011.
[14] T. Xian, L. Di, X. Sun, J. Ma, Y. Zhou, and X. Wei, “Photocatalytic degradation of dyes over Au decorated SrTiO3 nanoparticles under simulated sunlight and visible light irradiation,” J. Ceram. Soc. Japan, vol. 126, no. 5, pp. 354–359, 2018.
[15] L. Ma, T. Sun, H. Cai, Z.-Q. Zhou, J. Sun, and M. Lu, “Enhancing photocatalysis in SrTiO3 by using Ag nanoparticles: A two-step excitation model for surface plasmon-enhanced photocatalysis,” J. Chem. Phys., vol. 143, no. 8, p. 84706, 2015.
[16] X. Ma, Y. Dai, M. Li, and B. Huang, “Oxygen vacancies at the Au/SrTiO3 (001) interface: stabilities, electronic properties and effect on photocatalysis,” Phys. Chem. Chem. Phys., vol. 19, no. 1, pp. 774–781, 2017.
[17] D. Saadetnejad and R. Yıldırım, “Photocatalytic hydrogen production by water splitting over Au/Al-SrTiO3,” Int. J. Hydrogen Energy, vol. 43, no. 2, pp. 1116–1122, 2018.
[18] K. Wahab, T. Odedairo, J. Labis, M. Hedhili, A. Delavar, and H. Idriss, “Comparing Pt/SrTiO3 to Rh/SrTiO 3 for hydrogen photocatalytic production from ethanol,” Appl. Petrochemical Res., vol. 3, no. 3, pp. 83–89, 2013.
[19] Q. Zhang, Y. Huang, L. Xu, J. Cao, W. Ho, and S. C. Lee, “Visible-light-active plasmonic Ag–SrTiO3 nanocomposites for the degradation of NO in air with high selectivity,” ACS Appl. Mater. Interfaces, vol. 8, no. 6, pp. 4165–4174, 2016.
[20] Y. Fan, Y. Liu, H. Cui, W. Wang, Q. Shang, X. Shi, G. Cui, and B. Tang, “Photocatalytic Overall Water Splitting by SrTiO3 with Surface Oxygen Vacancies,” Nanomaterials, vol. 10, no. 12, p. 2572, 2020.
[21] N. Zhou, V. López-Puente, Q. Wang, L. Polavarapu, I. Pastoriza-Santos, and Q.-H. Xu, “Plasmon-enhanced light harvesting: applications in enhanced photocatalysis, photodynamic therapy and photovoltaics,” Rsc Adv., vol. 5, no. 37, pp. 29076–29097, 2015.
[22] P. Wang, B. Huang, Y. Dai, and M.-H. Whangbo, “Plasmonic photocatalysts: harvesting visible light with noble metal nanoparticles,” Phys. Chem. Chem. Phys., vol. 14, no. 28, pp. 9813–9825, 2012.
[23] P. Zhang, T. Wang, and J. Gong, “Mechanistic understanding of the plasmonic enhancement for solar water splitting,” Adv. Mater., vol. 27, no. 36, pp. 5328–5342, 2015.
[24] M. Valenti, M. P. Jonsson, G. Biskos, A. Schmidt-Ott, and W. A. Smith, “Plasmonic nanoparticle-semiconductor composites for efficient solar water splitting,” J. Mater. Chem. A, vol. 4, no. 46, pp. 17891–17912, 2016.
[25] R. Khan, W. Chuan, A. Yousuf, K. Chowdhury, and K. Cheng, “Schottky barrier and surface plasmonic resonance phenomena towards the photocatalytic reaction: study of their mechanisms to enhance photocatalytic activity,” Catal. Sci. Technol., vol. 5, no. 5, pp. 2522–2531, 2015.
[26] X. Zhang, Y. L. Chen, R.-S. Liu, and D. P. Tsai, “Plasmonic photocatalysis,” Reports Prog. Phys., vol. 76, no. 4, p. 46401, 2013.
[27] H. Liu, T. Wang, H. Zhang, G. Liu, P. Li, L. Liu, D. Hao, J. Ren, K. Chang, X. Meng, H. Wangc and J. Ye, “Room-temperature driven and visible light enhanced dehydrogenation reactions catalysed by basic Au/SrTiO3,” J. Mater. Chem. A, vol. 4, no. 5, pp. 1941–1946, 2016.
[28] E. T. Soares, M. A. Lansarin, and C. C. Moro, “A study of process variables for the photocatalytic degradation of rhodamine B,” Brazilian J. Chem. Eng., vol. 24, no. 1, pp. 29–36, 2007.
[29] M. Boroski, C. Rodrigues, C. Garcia, C. Sampaio, J. Nozaki, and N. Hioka, “Combined electrocoagulation and TiO2 photoassisted treatment applied to wastewater effluents from pharmaceutical and cosmetic industries,” J. Hazard. Mater., vol. 162, no. 1, pp. 448–454, 2009.
[30] J. Xie, Y. He, X. Li, M. Duan, J. Tang, Y. Wang, M. Chamas and H. Wang, “Adjustable band position of strontium titanate by doping-free solvents effect and its correlation with photodegradation performance” J. Mater. Sci. Mater. Electron., vol. 28, no. 20, pp. 14981–14987, 2017.
[31] J. Xie, C. Yang, Y. He, and H. Wang, “Effect of pH on the phase transformation of strontium titanium materials and their photocatalytic property,” J. Mater. Sci. Mater. Electron., vol. 29, no. 22, pp. 19344–19352, 2018.
[32] S. Konstas, I. Konstantinou, D. Petrakis, and T. Albanis, “Synthesis, characterization of g-C3N4/SrTiO3 heterojunctions and photocatalytic activity for organic pollutants degradation,” Catalysts, vol. 8, no. 11, p. 554, 2018.