[1] O. Paul and M. Adel, “Erosion Mechanisms of API X42 and AISI 1018 Steel Materials at Normal Impact Angle,” Int. J. Eng. Sci. Innov. Technol., vol. 3, no. 5, pp. 402–407, 2014.
[2] C. D. Reséndiz-Calderon et al., “Micro-Abrasion Wear Resistance of Borided 316L Stainless Steel and AISI 1018 Steel,” J. Mater. Eng. Perform., vol. 26, no. 11, pp. 5599–5609, 2017.
[3] P. Kuppuraj et al., “Mechanical and Metallurgical Behaviours of Nitrided Aircraft Shaft,” Int. J. Sci. Eng. Res., vol. 6, no. 9, pp. 1182–1185, 2015.
[4] M. Bodude, O. Adigun, and A. Ibrahim, “Microstructure and Mechanical Characterization of Austempered AISI 1018 Steel,” FUOYE J. Eng. Technol., vol. 5, no. 1, pp. 102–105, 2020.
[5] N. M. Ismail, N. A. A. Khatif, M. A. K. A. Kecik, and M. A. H. Shaharudin, “The effect of heat treatment on the hardness and impact properties of medium carbon steel,” IOP Conf. Ser. Mater. Sci. Eng., vol. 114, no. 1, pp. 0–9, 2016.
[6] G. Singh, “A review on effect of heat treatment on the properties of mild steel,” in Materials Today: Proceedings, 2020, vol. 37, no. Part 2, pp. 2266–2268.
[7] M. Syaiful Anwar, Muzi, Saefudin, and E. Mabruri, “Effect of heat treatment process on hardness and hot corrosion resistance of Fe-25Ni-18Cr-1Mo-2 W-1Nb-Cast austenitic stainless steel,” in Materials Today: Proceedings, 2020, vol. 44, pp. 3434–3438.
[8] Y. Zhao et al., “Influence of microstructure on the corrosion behavior of super 13Cr martensitic stainless steel under heat treatment,” Mater. Charact., vol. 175, p. 111066, May 2021.
[9] C. Su, D. Li, T. Ying, L. Zhou, L. Li, and X. Zeng, “Effect of Nd content and heat treatment on the thermal conductivity of Mg-Nd alloys,” J. Alloys Compd., vol. 685, pp. 114–121, Nov. 2016.
[10] M. Y. Hassaan, F. M. Ebrahim, A. G. Mostafa, and M. M. El-Desoky, “Effect of sulfur addition and heat treatment on electrical conductivity of barium vanadate glasses containing iron,” Mater. Chem. Phys., vol. 129, no. 1–2, pp. 380–384, Sep. 2011.
[11] K. Li et al., “Microstructure evolution of eutectic Si in Al-7Si binary alloy by heat treatment and its effect on enhancing thermal conductivity,” J. Mater. Res. Technol., vol. 9, no. 4, pp. 8780–8786, Jul. 2020.
[12] M. Balonis, G. Sant, and O. B. Isgor, “Mitigating steel corrosion in reinforced concrete using functional coatings, corrosion inhibitors, and atomistic simulations,” Cem. Concr. Compos., no. CECO 3117, 2018.
[13] A. El Jaouhari et al., “Electrosynthesis of zinc phosphate-polypyrrole coatings for improved corrosion resistance of steel,” Surfaces and Interfaces, vol. 15, pp. 224–231, 2019.
[14] J. Huang, C. Lou, D. Xu, X. Lu, Z. Xin, and C. Zhou, “Cardanol-based polybenzoxazine superhydrophobic coating with improved corrosion resistance on mild steel,” Prog. Org. Coatings, no. June, p. 105191, 2019.
[15] C. H. Hsu and K. T. Lin, “Effects of copper and austempering on corrosion behavior of ductile iron in 3.5 Pct sodium chloride,” Metall. Mater. Trans. A Phys. Metall. Mater. Sci., vol. 45, no. 3, pp. 1517–1523, 2014.
[16] H. Krawiec, V. Vignal, J. Lelito, A. Krystianiak, and P. Ozga, “In-situ monitoring of the corrosion behaviour of austempered ductile iron (ADI) under cyclic salt spray exposure,” Corros. Sci., vol. 185, p. 109437, 2021.
[17] O. J. Akinribide, S. O. Akinwamide, O. O. Ajibola, B. A. Obadele, S. O. oluwagbenga Olusunle, and P. A. Olubambi, “Corrosion behavior of ductile and austempered ductile cast iron in 0.01M and 0.05M NaCl Environments.,” Procedia Manuf., vol. 30, pp. 167–172, 2019.
[18] I. Fernandez and C. G. Berrocal, “Mechanical Properties of 30 Year-Old Naturally Corroded Steel Reinforcing Bars,” Int. J. Concr. Struct. Mater., vol. 13, no. 1, p. 19 pages, 2019.
[19] Y. Hou, D. Lei, S. Li, W. Yang, and C. Q. Li, “Experimental Investigation on Corrosion Effect on Mechanical Properties of Buried Metal Pipes,” Int. J. Corros., vol. 2016, p. 13 pages, 2016.
[20] AZoM, “AISI 1018 Mild / Low Carbon Steel,” azom.com, pp. 1–4, 2012.
[21] Key to Metals, “Classification of Carbon and Low-Alloy Steels,” 1999. [Online]. Available: http://www.keytometals.com/Articles/Art62.htm. [Accessed: 19-Jul-2019].
[22] M. Nganbe, T. I. Khan, and L. B. and Glenesk, “High wear resistant HVOF coatings for use in the oil and sands industry,” Symp. Mater. Technol. Mech. Eng., no. January 2006, 2006.
[23] AISI 1018, “Mild/Low Carbon Steel,” Am. Iron Steel Inst. (AISI), Massachusetts Ave. NW, Washington, DC 20001, https//www.steel.org, pp. 1–4, 2015.
[24] A. Keramatian, A. Bahrami, A. H. Darougheh, and S. Zare, “Root cause analysis of an unexpected brittle failure in a carbon steel slab,” Eng. Fail. Anal., vol. 122, p. 105205, 2021.
[25] E. Liu, Q. Li, S. Naseem, X. Huang, and W. Huang, “Effect of Isothermal Transformation Times below Ms and Tempering on Strength and Toughness of Low-Temperature Bainite in 0.53 C Bainitic Steel,” Materials , vol. 13, no. 10. 2020.
[26] H. Guo, X. Feng, A. Zhao, Q. Li, and J. Ma, “Influence of Prior Martensite on Bainite Transformation, Microstructures, and Mechanical Properties in Ultra-Fine Bainitic Steel,” Materials , vol. 12, no. 3. 2019.
[27] J. Zhao, J. Li, H. Ji, and T. Wang, “Effect of Austenitising Temperature on Mechanical Properties of Nanostructured Bainitic Steel,” Materials , vol. 10, no. 8. 2017.
[28] M. Franceschi et al., “Effect of Different Austempering Heat Treatments on Corrosion Properties of High Silicon Steel,” Mater. (Basel, Switzerland), vol. 14, no. 2, p. 288, Jan. 2021.
[29] D. Bai, F. Liu, H. Zhang, and J. Liu, “Corrosion behavior and passivation protection mechanism on different zone of high-nitrogen steel weld,” Mater. Lett., vol. 300, pp. 130–194, 2021.
[30] S. Seethammaraju and M. Rangarajan, “Corrosion of stainless steels in acidic, neutral and alkaline saline media: Electrochemical and microscopic analysis,” IOP Conf. Ser. Mater. Sci. Eng., vol. 577, p. 12188, 2019.