Tactile sensors are instrumental for developing the next generation of biologically inspired robotic prostheses with tactile feedback. Despite significant advancements made in current sensing technology, several limitations still exist including the reduced sensing sensitivity under high pressure, lack of compliance of the planar sensor with working surfaces and the demand for sophisticated manufacturing processes. In this study, we investigate the feasibility of using the 3D printing technology for the rapid and simple fabrication of a new conformal tactile sensor with an improved linear sensing range. The auxetic structure is integrated with a biomimetic inter-locked papilla feature which allows to detect multi-directional stimuli. Using the proposed design, the linear sensing range is extended to 0.5MPa and responsive to normal and shear forces with the sensitivities of 2.42KPa^(-1)and 2.20N^(-1) respectively. The proposed tactile sensor was printed on the fingertip of a prosthetic robotic hand to perform the sensorimotor control, or on the proximal femur head and lumbar vertebra for monitoring the bone-on-bone load. The results have shown promising application prospects of the proposed tactile sensor.