1. Patwardhan AG, Havey RM, Ghanayem AJ, Diener H, Meade KP, Dunlap B, Hodges SD: Load-carrying capacity of the human cervical spine in compression is increased under a follower load. Spine 2000, 25(12):1548-1554.
2. Panjabi MM, Cholewicki J, Nibu K, Grauer J, Babat LB, Dvorak J: Critical load of the human cervical spine: an in vitro experimental study. Clinical biomechanics 1998, 13(1):11-17.
3. Ng H-W, Teo E-C: Influence of preload magnitudes and orientation angles on the cervical biomechanics: a finite element study. Clinical Spine Surgery 2005, 18(1):72-79.
4. Finn MA, Brodke DS, Daubs M, Patel A, Bachus KN: Local and global subaxial cervical spine biomechanics after single-level fusion or cervical arthroplasty. European spine journal 2009, 18(10):1520-1527.
5. Finn MA, Samuelson MM, Bishop F, Bachus KN, Brodke DS: Two-level noncontiguous versus three-level anterior cervical discectomy and fusion: a biomechanical comparison. Spine 2011, 36(6):448-453.
6. Du C-F, Cai X-Y, Sun M-S: The Biomechanical Response of Cervical Spine under Different Follower Loads. In: 2019 IEEE International Conference on Mechatronics and Automation (ICMA): 2019. IEEE: 360-364
7. Snyder JT, Tzermiadianos MN, Ghanayem AJ, Voronov LI, Rinella A, Dooris A, Carandang G, Renner SM, Havey RM, Patwardhan AG: Effect of uncovertebral joint excision on the motion response of the cervical spine after total disc replacement. Spine 2007, 32(26):2965-2969.
8. Patwardhan AG, Havey RM, Meade KP, Lee B, Dunlap B: A follower load increases the load-carrying capacity of the lumbar spine in compression. Spine 1999, 24(10):1003-1009.
9. Goel VK, Panjabi MM, Patwardhan AG, Dooris AP, Serhan H: Test protocols for evaluation of spinal implants. JBJS 2006, 88(suppl_2):103-109.
10. Shirazi-Adl A: Analysis of large compression loads on lumbar spine in flexion and in torsion using a novel wrapping element. Journal of biomechanics 2006, 39(2):267-275.
11. Rohlmann A, Neller S, Claes L, Bergmann G, Wilke H-J: Influence of a follower load on intradiscal pressure and intersegmental rotation of the lumbar spine. Spine 2001, 26(24):E557-E561.
12. Cripton P: The effects of physiologic compressive preload on the in vitro flexibility of the lower cervical spine. Proceedings of the Cervical Spine Research Society Charleston, SC, 2000 2000.
13. Bell KM, Yan Y, Hartman RA, Lee JY: Influence of follower load application on moment-rotation parameters and intradiscal pressure in the cervical spine. Journal of biomechanics 2018, 76:167-172.
14. Puttlitz CM, Rousseau MA, Xu Z, Hu S, Tay BK, Lotz JC: Intervertebral disc replacement maintains cervical spine kinetics. Spine 2004, 29(24):2809-2814.
15. Barrey C, Rousseau M-a, Persohn S, Campana S, Perrin G, Skalli W: Relevance of using a compressive preload in the cervical spine: an experimental and numerical simulating investigation. European Journal of Orthopaedic Surgery & Traumatology 2015, 25(1):155-165.
16. Adams MA, Hutton W: The effect of posture on the role of the apophysial joints in resisting intervertebral compressive forces. The Journal of bone and joint surgery British volume 1980, 62(3):358-362.
17. Shirazi-Adl A, Drouin G: Load-bearing role of facets in a lumbar segment under sagittal plane loadings. Journal of biomechanics 1987, 20(6):601-613.
18. Schendel MJ, Wood KB, Buttermann GR, Lewis JJ, Ogilvie JW: Experimental measurement of ligament force, facet force, and segment motion in the human lumbar spine. Journal of biomechanics 1993, 26(4-5):427-438.
19. Goel V, Winterbottom J, Weinstein JN, Kim Y: Load sharing among spinal elements of a motion segment in extension and lateral bending. Journal of biomechanical engineering 1987, 109(4):291-297.
20. Chang U-K, Kim DH, Lee MC, Willenberg R, Kim S-H, Lim J: Changes in adjacent-level disc pressure and facet joint force after cervical arthroplasty compared with cervical discectomy and fusion. Journal of Neurosurgery: Spine 2007, 7(1):33-39.
21. Kuo C-S, Hu H-T, Lin R-M, Huang K-Y, Lin P-C, Zhong Z-C, Hseih M-L: Biomechanical analysis of the lumbar spine on facet joint force and intradiscal pressure-a finite element study. BMC musculoskeletal disorders 2010, 11(1):151.
22. Du C-F, Yang N, Guo J-C, Huang Y-P, Zhang C: Biomechanical response of lumbar facet joints under follower preload: a finite element study. BMC musculoskeletal disorders 2016, 17(1):126.
23. Cai X Y, Sang D, Yuchi C X, et al. Using finite element analysis to determine effects of the motion loading method on facet joint forces after cervical disc degeneration[J]. Computers in biology and medicine, 2019: 103519.
24. Wilke HJ, Neef P, Caimi M, Hoogland T, Claes LE: New in vivo measurements of pressures in the intervertebral disc in daily life. Spine 1999, 24(8):755-762.
25. Sis HL, Mannen EM, Wong BM, Cadel ES, Bouxsein ML, Anderson DE, Friis EA: Effect of follower load on motion and stiffness of the human thoracic spine with intact rib cage. Journal of biomechanics 2016, 49(14):3252-3259.
26. Anderson DE, Mannen EM, Sis HL, Wong BM, Cadel ES, Friis EA, Bouxsein ML: Effects of follower load and rib cage on intervertebral disc pressure and sagittal plane curvature in static tests of cadaveric thoracic spines. Journal of biomechanics 2016, 49(7):1078-1084.
27. Hattori S: Cervical intradiscal pressure in movements and traction of the cervical spine. Z Orthop 1981, 119:568-569.
28. Yuchi C-X, Sun G, Chen C, Liu G, Zhao D, Yang H, Xu B, Deng S, Ma X, Du C-F: Comparison of the Biomechanical Changes After Percutaneous Full-Endoscopic Anterior Cervical Discectomy versus Posterior Cervical Foraminotomy at C5-C6: A Finite Element-Based Study. World neurosurgery 2019.
29. Markolf KL, Morris JM: The structural components of the intervertebral disc: a study of their contributions to the ability of the disc to withstand compressive forces. JBJS 1974, 56(4):675-687.
30. Goel VK, Clausen JD: Prediction of load sharing among spinal components of a C5-C6 motion segment using the finite element approach. Spine 1998, 23(6):684-691.
31. Yu C-C, Liu P, Huang D-G, Jiang Y-H, Feng H, Hao D-J: A new cervical artificial disc prosthesis based on physiological curvature of end plate: a finite element analysis. The Spine Journal 2016, 16(11):1384-1391.
32. Womack W, Woldtvedt D, Puttlitz C: Lower cervical spine facet cartilage thickness mapping. Osteoarthritis and cartilage 2008, 16(9):1018-1023.
33. Schwab F, Lafage V, Boyce R, Skalli W, Farcy J-P: Gravity line analysis in adult volunteers: age-related correlation with spinal parameters, pelvic parameters, and foot position. Spine 2006, 31(25):E959-E967.
34. Mo Z, Li Q, Jia Z, Yang J, Wong DW-C, Fan Y: Biomechanical consideration of prosthesis selection in hybrid surgery for bi-level cervical disc degenerative diseases. European spine journal 2017, 26(4):1181-1190.
35. Wang Z, Zhao H, Liu J-m, Tan L-w, Liu P, Zhao J-h: Resection or degeneration of uncovertebral joints altered the segmental kinematics and load-sharing pattern of subaxial cervical spine: A biomechanical investigation using a C2–T1 finite element model. Journal of biomechanics 2016, 49(13):2854-2862.
36. Shirazi-Adl A, Ahmed AM, Shrivastava SC: Mechanical response of a lumbar motion segment in axial torque alone and combined with compression. Spine 1986, 11(9):914-927.
37. Yoganandan N, Kumaresan S, Pintar FA: Geometric and mechanical properties of human cervical spine ligaments. Journal of biomechanical engineering 2000, 122(6):623-629.
38. Du C-F, Guo J-C, Huang Y-P, Fan Y-B: A new method for determining the effect of follower load on the range of motions in the lumbar spine. In: World Congress on Medical Physics and Biomedical Engineering, June 7-12, 2015, Toronto, Canada: 2015. Springer: 326-329.
39. Kallemeyn N, Gandhi A, Kode S, Shivanna K, Smucker J, Grosland N: Validation of a C2–C7 cervical spine finite element model using specimen-specific flexibility data. Medical engineering & physics 2010, 32(5):482-489.
40. Wheeldon JA, Pintar FA, Knowles S, Yoganandan N: Experimental flexion/extension data corridors for validation of finite element models of the young, normal cervical spine. Journal of biomechanics 2006, 39(2):375-380.
41. Panjabi MM, Crisco JJ, Vasavada A, Oda T, Cholewicki J, Nibu K, Shin E: Mechanical properties of the human cervical spine as shown by three-dimensional load–displacement curves. Spine 2001, 26(24):2692-2700.
42. Traynelis VC, Donaher PA, Roach RM, Kojimoto H, Goel VK: Biomechanical comparison of anterior Caspar plate and three-level posterior fixation techniques in a human cadaveric model. Journal of neurosurgery 1993, 79(1):96-103.
43. Yoganandan N, Pintar FA, Stemper BD, Wolfla CE, Shender BS, Paskoff G: Level-dependent coronal and axial moment-rotation corridors of degeneration-free cervical spines in lateral flexion. JBJS 2007, 89(5):1066-1074.
44. Yoganandan N, Stemper BD, Pintar FA, Baisden JL, Shender BS, Paskoff G: Normative segment-specific axial and coronal angulation corridors of subaxial cervical column in axial rotation. Spine 2008, 33(5):490-496.
45. Lee S-H, Im Y-J, Kim K-T, Kim Y-H, Park W-M, Kim K: Comparison of cervical spine biomechanics after fixed-and mobile-core artificial disc replacement: a finite element analysis. Spine 2011, 36(9):700-708.
46. Pelker RR, Duranceau JS, Panjabi MM: Cervical spine stabilization. A three-dimensional, biomechanical evaluation of rotational stability, strength, and failure mechanisms. Spine 1991, 16(2):117-122.
47. Moroney SP, Schultz AB, Miller JA, Andersson GB: Load-displacement properties of lower cervical spine motion segments. Journal of biomechanics 1988, 21(9):769-779.
48. Cripton PA, Bruehlmann SB, Orr TE, Oxland TR, Nolte L-P: In vitro axial preload application during spine flexibility testing: towards reduced apparatus-related artefacts. Journal of biomechanics 2000, 33(12):1559-1568.
49. Kim K, Kim YH, Lee S: Investigation of optimal follower load path generated by trunk muscle coordination. Journal of biomechanics 2011, 44(8):1614-1617.
50. Pospiech J, Stolke D, Wilke HJ, Claes LE: Intradiscal pressure recordings in the cervical spine. Neurosurgery 1999, 44(2):379-384.