[1] Mattli M, Matli P, Shakoor A and Amer Mohamed A 2019 Structural and Mechanical Properties of Amorphous Si3N4 Nanoparticles Reinforced Al Matrix Composites Prepared by Microwave Sintering Ceramics 2 126–34.DOI:10.3390/ceramics2010012
[2] Ozkaya S and Canakci A 2016 Effect of the B4C content and the milling time on the synthesis, consolidation and mechanical properties of AlCuMg-B4C nanocomposites synthesized by mechanical milling Powder Technol. 297 8–16.DOI:10.1016/j.powtec.2016.04.004
[3] Reddy P S, Kesavan R and Vijaya Ramnath B 2018 Investigation of Mechanical Properties of Aluminium 6061-Silicon Carbide, Boron Carbide Metal Matrix Composite Silicon 10 495–502.DOI:10.1007/s12633-016-9479-8
[4] Sijo M T and Jayadevan K R 2016 Analysis of Stir Cast Aluminium Silicon Carbide Metal Matrix Composite: A Comprehensive Review Procedia Technol. 24 379–85.DOI:10.1016/j.protcy.2016.05.052
[5] Ağaoğulları D 2019 Effects of ZrC content and mechanical alloying on the microstructural and mechanical properties of hypoeutectic Al-7 wt.% Si composites prepared by spark plasma sintering Ceram. Int. 45 13257–68.DOI:https://doi.org/10.1016/j.ceramint.2019.04.013
[6] Shinde D M, Sahoo P and Davim J P 2020 Tribological characterization of particulate-reinforced aluminum metal matrix nanocomposites: A review Adv. Compos. Lett. 29 2633366X2092140.DOI:10.1177/2633366x20921403
[7] Zhu X, Zhao Y G, Wu M, Wang H Y and Jiang Q C 2016 Fabrication of 2014 aluminum matrix composites reinforced with untreated and carboxyl-functionalized carbon nanotubes J. Alloys Compd. 674 145–52.DOI:10.1016/j.jallcom.2016.03.036
[8] Dey D, Bhowmik A and Biswas A 2020 Effect of SiC Content on Mechanical and Tribological Properties of Al2024-SiC Composites Silicon.DOI:10.1007/s12633-020-00757-y
[9] Manohar G, Dey A, Pandey K M and Maity S R 2018 Fabrication of metal matrix composites by powder metallurgy: A review AIP Conference Proceedings vol 195210.1063/1.5032003 (American Institute of Physics Inc.).DOI:10.1063/1.5032003
[10] Mattli M R, Shakoor A, Matli P R and Mohamed A M A 2019 Microstructure and compressive behavior of Al–Y2O3 nanocomposites prepared by microwave-assisted mechanical alloying Metals (Basel). 9 1–9.DOI:10.3390/met9040414
[11] Saravana Kumar M, Pruncu C I, Harikrishnan P, Rashia Begum S and Vasumathi M 2021 Experimental Investigation of In-homogeneity in Particle Distribution During the Processing of Metal Matrix Composites Silicon.DOI:10.1007/s12633-020-00886-4
[12] Stalin B, Sudha G T and Ravichandran M 2018 Investigations on Characterization and Properties of Al-MoO3 Composites Synthesized Using Powder Metallurgy Technique Silicon 10 2663–70.DOI:10.1007/s12633-018-9803-6
[13] Melaibari A, Fathy A, Mansouri M and Eltaher M A 2019 Experimental and numerical investigation on strengthening mechanisms of nanostructured Al-SiC composites J. Alloys Compd. 774 1123–32.DOI:10.1016/j.jallcom.2018.10.007
[14] Alizadeh M, Paydar M H and Sharifian Jazi F 2013 Structural evaluation and mechanical properties of nanostructured Al/B 4C composite fabricated by ARB process Compos. Part B Eng. 44 339–43.DOI:10.1016/j.compositesb.2012.04.069
[15] Sudha G T, Stalin B and Ravichandran M 2019 Optimization of powder metallurgy parameters to obtain low corrosion rate and high compressive strength in Al-{MoO}3 composites using {SN} ratio and {ANOVA} analysis Mater. Res. Express 6 96520.DOI:10.1088/2053-1591/ab2cef
[16] Prasad Reddy A, Vamsi Krishna P and Rao R N 2019 Tribological Behaviour of Al6061–2SiC-xGr Hybrid Metal Matrix Nanocomposites Fabricated through Ultrasonically Assisted Stir Casting Technique Silicon 11 2853–71.DOI:10.1007/s12633-019-0072-9
[17] Surya M S and Prasanthi G 2021 Effect of SiC Weight Percentage on Tribological Characteristics of Al7075/SiC Composites Silicon.DOI:10.1007/s12633-020-00885-5
[18] Prakash J, Gopalakannan S and Chakravarthy V K 2021 Mechanical Characterization Studies of Aluminium Alloy 7075 Based Nanocomposites Silicon.DOI:10.1007/s12633-021-00979-8
[19] Manohar G, Pandey K M and Ranjan Maity S 2020 Effect of compaction pressure on mechanical properties of AA7075/B4C/graphite hybrid composite fabricated by powder metallurgy techniques Mater. Today Proc.DOI:10.1016/j.matpr.2020.05.194
[20] Manohar G, Maity S R and Pandey K M 2021 Effect of Sintering Temperatures on Mechanical Properties of AA7075/B4C/Graphite Hybrid Composite Fabricated by Powder Metallurgy Techniques Recent Advances in Mechanical Engineering ed K M Pandey, R D Misra, P K Patowari and U S Dixit (Singapore: Springer Singapore) pp 343–50
[21] Venkatesh V S S and Deoghare A B 2021 Effect of Sintering Mechanisms on the Mechanical Behaviour of SiC and Kaoline Reinforced Hybrid Aluminium Metal Matrix Composite Fabricated through Powder Metallurgy Technique Silicon.DOI:10.1007/s12633-021-01333-8
[22] Anselmi-Tamburini U 2019 Spark Plasma Sintering Ref. Modul. Mater. Sci. Mater. Eng. d 1–17.DOI:10.1016/b978-0-12-803581-8.11730-8
[23] Akinwamide S O, Lesufi M, Akinribide O J, Mpolo P and Olubambi P A 2020 Evaluation of microstructural and nanomechanical performance of spark plasma sintered TiFe-SiC reinforced aluminium matrix composites J. Mater. Res. Technol. 9 12137–48.DOI:10.1016/j.jmrt.2020.08.068
[24] Manohar G, Pandey K M and Maity S R 2021 Effect of sintering mechanisms on mechanical properties of AA7075/B4C composite fabricated by powder metallurgy techniques Ceram. Int. 47 15147–54.DOI:10.1016/j.ceramint.2021.02.073
[25] Vanmeensel K, Laptev A, Hennicke J, Vleugels J and Van Der Biest O 2005 Modelling of the temperature distribution during field assisted sintering Acta Mater. 53 4379–88.DOI:10.1016/j.actamat.2005.05.042
[26] Manohar G, Pandey K M and Maity S R 2020 Aluminium (AA7075) Metal Matrix Composite Reinforced with B 4 C Nano Particles and Effect of Individual Alloying Elements in Al Fabricated by Powder Metallurgy Techniques. J. Phys. Conf. Ser. 1451 012024.DOI:10.1088/1742-6596/1451/1/012024
[27] Guan D, He X, Zhang R and Qu X 2017 Microstructure and tensile properties of in situ polymer-derived particles reinforced steel matrix composites produced by powder metallurgy method Mater. Sci. Eng. A 705 231–8.DOI:10.1016/j.msea.2017.07.084
[28] Manohar G, Maity S R and Pandey K M 2021 Microstructural and Mechanical Properties of Microwave Sintered AA7075/Graphite/SiC Hybrid Composite Fabricated by Powder Metallurgy Techniques Silicon.DOI:10.1007/s12633-021-01299-7
[29] Ashwath P and Anthony Xavior M 2014 The effect of ball milling & reinforcement percentage on sintered samples of aluminium alloy metal matrix composites Procedia Eng. 97 1027–32.DOI:10.1016/j.proeng.2014.12.380
[30] Bhattacharya M and Basak T 2016 A review on the susceptor assisted microwave processing of materials Energy 97 306–38.DOI:10.1016/j.energy.2015.11.034
[31] Lee W-C, Liu K-S and Lin I-N 2001 Microwave sintering Pb(Zr0.52Ti0.48)O3 piezoelectric ceramics Ferroelectrics 262 293–8.DOI:10.1080/00150190108225165
[32] Mishra R R and Sharma A K 2016 Microwave-material interaction phenomena: Heating mechanisms, challenges and opportunities in material processing Compos. Part A Appl. Sci. Manuf. 81 78–97.DOI:10.1016/j.compositesa.2015.10.035
[33] Sivasankaran S, Sivaprasad K, Narayanasamy R and Satyanarayana P V. 2011 X-ray peak broadening analysis of AA 6061100-x-x wt.% Al 2O3 nanocomposite prepared by mechanical alloying Mater. Charact. 62 661–72.DOI:10.1016/j.matchar.2011.04.017
[34] Sivasankaran S, Sivaprasad K, Narayanasamy R and Iyer V K 2010 Synthesis, structure and sinterability of 6061 AA100-x-x wt.% TiO2 composites prepared by high-energy ball milling J. Alloys Compd. 491 712–21.DOI:10.1016/j.jallcom.2009.11.051
[35] Cabeza M, Feijoo I, Merino P, Pena G, Pérez M C, Cruz S and Rey P 2017 Effect of high energy ball milling on the morphology, microstructure and properties of nano-sized TiC particle-reinforced 6005A aluminium alloy matrix composite Powder Technol. 321 31–43.DOI:10.1016/j.powtec.2017.07.089
[36] Manohar G, Pandey K M and Maity S R 2021 Effect of microwave sintering on the microstructure and mechanical properties of AA7075/B4C/ZrC hybrid nano composite fabricated by powder metallurgy techniques Ceram. Int.DOI:10.1016/J.CERAMINT.2021.08.156
[37] Ashwath P and Xavior M A 2018 Effect of ceramic reinforcements on microwave sintered metal matrix composites Mater. Manuf. Process. 33 7–12.DOI:10.1080/10426914.2016.1244851
[38] Lu L, Lai M O and Zhang S 1997 Diffusion in mechanical alloying J. Mater. Process. Technol. 67 100–4.DOI:10.1016/S0924-0136(96)02826-9
[39] Alihosseini H, Dehghani K and Kamali J 2017 Microstructure characterization, mechanical properties, compressibility and sintering behavior of Al-B4C nanocomposite powders Adv. Powder Technol. 28 2126–34.DOI:10.1016/j.apt.2017.05.019
[40] Ruszkiewicz B J, Grimm T, Ragai I, Mears L and Roth J T 2017 A Review of Electrically-Assisted Manufacturing with Emphasis on Modeling and Understanding of the Electroplastic Effect J. Manuf. Sci. Eng. Trans. ASME 139.DOI:10.1115/1.4036716
[41] Rahmani K and Majzoobi G H 2020 The effect of particle size on microstructure, relative density and indentation load of Mg-B4C composites fabricated at different loading rates J. Compos. Mater. 54 2297–311.DOI:10.1177/0021998319896009
[42] Viala J C, Bouix J, Gonzalez G and Esnouf C 1997 Chemical reactivity of aluminium with boron carbide J. Mater. Sci. 32 4559–73.DOI:10.1023/A:1018625402103
[43] Liu R, Wu C, Zhang J, Luo G, Shen Q and Zhang L 2018 Microstructure and mechanical behaviors of the ultrafine grained AA7075/B4C composites synthesized via one-step consolidation J. Alloys Compd. 748 737–44.DOI:https://doi.org/10.1016/j.jallcom.2018.03.152
[44] Prakash C, Singh S, Sharma S, Garg H, Singh J, Kumar H and Singh G 2020 Fabrication of aluminium carbon nano tube silicon carbide particles based hybrid nano-composite by spark plasma sintering Mater. Today Proc. 21 1637–42.DOI:10.1016/j.matpr.2019.11.273
[45] Zheng R, Chen J, Zhang Y, Ameyama K and Ma C 2014 Fabrication and characterization of hybrid structured Al alloy matrix composites reinforced by high volume fraction of B4C particles Mater. Sci. Eng. A 601 20–8.DOI:10.1016/j.msea.2014.02.032
[46] Lai J, Zhang Z and Chen X G 2013 Precipitation strengthening of Al-B4C metal matrix composites alloyed with Sc and Zr J. Alloys Compd. 552 227–35.DOI:10.1016/j.jallcom.2012.10.096
[47] Zhang Z and Chen D L 2006 Consideration of Orowan strengthening effect in particulate-reinforced metal matrix nanocomposites: A model for predicting their yield strength Scr. Mater. 54 1321–6.DOI:10.1016/j.scriptamat.2005.12.017
[48] Akinwekomi A D 2019 Microstructural characterisation and corrosion behaviour of microwave-sintered magnesium alloy AZ61/fly ash microspheres syntactic foams Heliyon 5 e01531.DOI:10.1016/j.heliyon.2019.e01531
[49] Keyson D, Volanti D P, Cavalcante L S, Simões A Z, Souza I A, Vasconcelos J S, Varela J A and Longo E 2007 Domestic microwave oven adapted for fast heat treatment of Ba0.5Sr0.5(Ti0.8Sn0.2)O3 powders J. Mater. Process. Technol. 189 316–9.DOI:10.1016/j.jmatprotec.2007.02.001
[50] Reddy M P, Shakoor R A, Parande G, Manakari V, Ubaid F, Mohamed A M A and Gupta M 2017 Enhanced performance of nano-sized SiC reinforced Al metal matrix nanocomposites synthesized through microwave sintering and hot extrusion techniques Prog. Nat. Sci. Mater. Int.27 606–14.DOI:https://doi.org/10.1016/j.pnsc.2017.08.015