[1] Ravindranadh Bobbili, V. Madhu, A.K. Gogia, Modelling and analysis of material removal rate and surface roughness in wire-cut EDM of armour materials, Int. J. Engineering Science and Technology.
[2] Ergun Ekici, Ali Riza Motorcu and Abdil Kus¸ Evaluation of surface roughness and material removal rate in the wire electrical discharge machining of Al/B4C composites via the Taguchi method, Journal of Composite Materials, 2015, 0 (0) 1– 12.
[3] Sanjeev Kumar Garg, Alakesh Manna, Ajai Jain, Experimental investigation of spark gap and material removal rate of Al/ZrO2(P)‑MMC machined with wire EDM, J Braz. Soc. Mech. Sci. Eng., 2015.
[4] A. Pramanik, Electrical discharge machining of MMCs reinforced with very small particles, Materials and Manufacturing Processes, 2015.
[5] A. Pramanik and G. Littlefair, Wire EDM Mechanism of MMCs with the Variation of Reinforced Particle Size, Materials and Manufacturing Processes, 2015.
[6] A. Ramamurthy, R. Sivaramakrishnan, T. Muthuramalingam and S. Venugopal, Performance Analysis of Wire Electrodes on Machining Ti-6Al-4V Alloy using Electrical Discharge Machining Process, Machining Science and Technology An International Journal, 2015, 19:577– 592.
[7] S. Suresh Kumar, M. Uthayakumar, S. Thirumalai Kumaran, P. Parameswaran, E. Mohandas, G. Kempulraj, B.S. Ramesh Babu, S.A. Natarajan, Parametric optimization of wire electrical discharge machining on aluminium based composites through grey relational analysis, Journal of Manufacturing Processes, 2015, JMP-377; No. of Pages 7.
[8] Kamlesh Joshi, Gaurav Sharma, Ganesh Dongre, Suhas Sitaram Joshi, Numerical Modelling of Wire-EDM for Predicting Erosion Rate of Silicon, J. Inst. Eng. India Ser. C, 2016.
[9] J.F. Liu, Y.B. Guo, T.M. Butler, M.L. Weaver, Crystallography, compositions, and properties of white layer by wire electrical discharge machining of nitinol shape memory alloy, Materials and Design, 109 (2016) 1– 9.
[10] Nilesh G. Patila, P.K. Brahmankarb, D.G. Thakur, On the effects of wire electrode and ceramic volume fraction in wire electrical discharge machining of ceramic particulate reinforced aluminium matrix composites, 18th CIRP Conference on Electro Physical and Chemical Machining (ISEM XVIII), Procedia CIRP 42 ( 2016 ) 286 – 291.
[11] Nilesh G. Patila, and P.K. Brahmankar, Semi-empirical modeling of surface roughness in wire electro-discharge machining of ceramic particulate reinforced Al matrix composites, Procedia CIRP, 2016, 42, 280 – 285.
[12] A. Pramanik, and A.K. Basak, Degradation of wire electrode during electrical discharge Machining of metal matrix composites, Wear, 2016.
[13] S Rajeswari, et.al., Growth and investigations of 3rd order NLO properties of novel semi organic tartaric acid lithium sulfate single crystal for photonics application, Optical and Quantum Electronics 52 (8), (2020) 1-10.
[14] Abhijit Dey and Krishna Murari Pandey, Wire electrical discharge machining characteristics of AA6061/ cenosphere as-cast aluminium matrix composites, Materials and Manufacturing Processes, 2017, ISSN:1042-6914 (Print) 1532-2475.
[15] A. S. S. Balan and Abimannan Giridharan, A progress review in wire electrical discharge machining process, International Journal of Automotive and Mechanical Engineering, 2017, Volume 14, Issue 2 pp. 4097-4124.
[16] P. M. Gopal, K. Soorya Prakash, S. Jayaraj, WEDM of Mg/CRT/BN Composites: Effect of Materials and Machining Parameters, Journal of Materials and Manufacturing Processes, 2017, Volume 33, 2018 - Issue 1, Pages 77-84.
[17] Ashish Goyal, Investigation of Material removal rate and Surface roughness during Wire Electrical discharge machining (WEDM) machining of Inconel 625 super alloy by cryogenic treated tool electrode, Journal of King Saud University – Science, 2017.
[18] Gurupavan H R, Devegowda T M, Ravindra H V, Ugrasen G, Estimation of Machining Performances in WEDM of Aluminium based Metal Matrix Composite Material using ANN, Materials Today: Proceedings 4 (2017), pp10035–10038.
[19] Harmesh Kumar, Alakesh Manna, Rajesh Kumar, Modeling of Process Parameters for Surface Roughness and Analysis of Machined Surface in WEDM of Al/SiC-MMC, Trans Indian Inst Met, 2017.
[20] Geetha Palani, et.al., Growth and characterization of semi organic nonlinear optical l- Valine Ferric Chloride single crystal by solution growth technique Current Applied Physics Volume 15, Issue 3, (2015), Pages 201-207.
[21] Jay M. Pujara, Dr. K.D. Kothari, Dr. A.V. Gohil, Process Parameter Optimization for MRR and Surface Roughness during Machining LM6 Aluminum MMC on WEDM, Advanced Engineering Forum, 2017, ISSN: 2234-991X, Vol. 20, pp 42-50.
[22] G Palani et.al., Growth, characterization and antibacterial activity of LHCdBr single crystal, Materials Research Innovations, (2020) 1-7
[23] Himanshu Bisaria and Pragya Shandilya, Experimental investigation on wire electric discharge machining (WEDM) of Nimonic C-263 superalloy, Materials and Manufacturing Processes, 2018, ISSN: 1042-6914 (Print) 1532-2475.
[24] A. Deya, V.R. Reddy Bandi, K.M.Pandey, Wire electrical discharge machining characteristics of AA6061/cenosphere aluminium matrix composites using RSM, Materials Today: Proceedings 5 (2018) 1278–1285.
[25] T T Satheesh Kumar, R Subramanian, C Velmurugan, K Somasundara Vinoth, Experimental investigations on wire electrical discharge machining characteristics of Aluminum hybrid composites, Indian Journal of Engineering and Materials Sciences, August 2018, Vol. 25, pp. 281-290.
[26] Eswara Krishna Mussada, Choo Chee Hua and Ayyagari Kameswari Prasada Rao, Surface hardenability studies of the die steel machined by WEDM, Materials and Manufacturing Processes, 2018,
[27] Mangesh R. Phate, Shraddha B. Toney, Modeling and prediction of WEDM performance parameters for Al/SiCp MMC using dimensional analysis and artificial Neural network, Engineering Science and Technology, an International Journal, 2018,
[28] A. Pramanik, A.K. Basak, Sustainability in wire electrical discharge machining of Titanium alloy: understanding wire rupture, Journal of Cleaner Production, 2018,
[29] Sadananda Chakraborty, Souren Mitra and Dipankar Bose, Modeling and Analysis of B4C Powder Mixed Wire EDM Process for Improving Performance Criteria of Ti6Al4V, IOP Conf. Series: Materials Science and Engineering 653 (2019) 012006,
[30] Kunal Chopra, Aishwarya Payla, Eswara Krishna Mussada, Detailed Experimental Investigations on Machinability of EN31 Steel by WEDM, Trans Indian Inst Met, 2019.
[31] Mehmet ALTUĞ, Investigation of Hardox 400 Steel Exposed to Heat Treatment Processes in WEDM, 2019, Journal of Polytechnic, 2019; 22 (1) : 237-244.
[32] Prem Saran Satsangi and Piyush Goyal, Multivariable Optimization in Micro WEDM of Al 7000 Alloy Using Grey Relational Analysis, International Journal of Mechanical Engineering and Robotics Research, March 2019, Vol. 8, No. 2, 177-181. [33] C. Pravallika et.al; Crystal growth, spectroscopic and antimicrobial investigations on glycine-doped ZnSO 4–(NH 4)2 SO4 single crystal, Journal of Materials Science: Materials in Electronics, 1-9
[34] S Suresh, G Harinath Gowd And M L S Deva Kumar, Experimental investigation on Mechanical properties of Al 7075/Al2O3/Mg NMMC’s by stir casting method, Indian Academy of Sciences, https://doi.org/10.1007/s12046-018-1021-9, Sådhanå (2019) 44:51.
[35] Yanming Zhang, Shiyi Guo, Zhen Zhang, Hao Huang, Wenyuan Li, Guojun Zhang,Yu Huang, Simulation and experimental investigations of complex thermal deformation behavior of wire electrical discharge machining of the thin-walled component of Inconel, 718, 2019, Journal of Materials Processing Tech., 270, 306– 322.
[36] R Manikandan and TV Arjunan, Mechanical and tribological behaviours of aluminium hybrid composites reinforced by CDA-B4C, Mater. Res. Express 7 (2020) 016584.
[37] A Arputhalatha et.al., Synthesis, growth, physio‐chemical and Hirshfeld surface analysis of guanidinium l-glutamate single crystal, Journal of Materials Science: Materials in Electronics, 1-10.
[38] P. Jayapradha, S. Sathishkumar, P. Prakash, Parametric Optimization On Wedm Of Aluminium- Bagasse Ash- Graphite Hybrid Composites By Taguchi Approach, Journal of Critical Reviews, 2020, ISSN- 2394-5125, Vol 7, Issue 9, pp 186-189.
[39] Rakesh Chaudhari, Jay J. Vora, Vivek Patel, L. N. López de Lacalle and D. M. Parikh, Surface Analysis of Wire-Electrical-Discharge-Machining-Processed Shape-Memory Alloys, Materials, 2020, 13, 530.
[40] S. Shanmugan et.al., Investigation on single crystal by tartaric acid–barium chloride: growth and characterization of novel NLO materials, Bulletin of Materials Science 43 (1), 1-8.
[41] Hongzhi Yan, Djo Bakadiasa Kabongo, Zhaojun Yan, Fenglin Han, Zhi Chen, Sustainable production of high-uniformity workpiece surface quality in wire electrical discharge machining by fabricating surface microstructure on wire electrode, Journal of Cleaner Production 259 (2020) 120881.