Cell culture
Human EPCs (Celprogen, Torrance, CA) and human astrocytes (ASCs, ATCC, MD, USA) cell lines were used for this study. EPCs were cultured in EPC complete growth medium with serum and antibiotics in an incubator with 5% CO2 at 37°C as previously published [24]. ASCs were cultured in ASC medium (ScienCell, Carlsbad, CA) with 10% fetal bovine serum (FBS), 5% ASC growth factor, and 5% penicillin/streptomycin (P/S) solution in a standard cell culture incubator. Culture medium was replaced every 2 days.
Generation of miR-126 overexpressing EPC-EXs
The miR-126 mimic was used to generate miR-126 overexpressing EPC-EXs (miR126-EPC-EXs) per our previous publication [23]. Briefly, the EPCs were transfected with miR-126 mimics (1 nmol/L, Applied Biosystems) using Dharmafect 1 transfection reagent (Dharmacon) for 48 hours in EPC complete growth medium. The complete medium was replaced with a serum-free medium for 48 hours to promote the release of EXs. The culture medium was then collected for EXs isolation.
EPC-EX isolation
EPCs were cultured in a serum-free medium for 48 hours. After serum starvation, the culture medium was collected and centrifuged at 300 x g for 6 minutes, followed by 2000 x g for 20 minutes to remove the cells along with cell debris. The obtained supernatant was centrifuged at 20,000 x g for 70 minutes, this allowed the pelleting of microvesicles (MVs). The obtained supernatant was subjected to ultracentrifugation at 170,000 x g for 90 minutes to pellet the EXs. After ultracentrifugation, the supernatant was discarded, and the pellet was resuspended in 100 μl sterile-filtered phosphate buffer saline (PBS) for nanosight tracking analysis (NTA)or culture medium for co-incubation study. The size and concentration of EPC-EXs were determined by NS300 (Nanosight, Amesbury, UK)[25]. NTA visualizes and measures particle size and concentration by utilizing light scattering and Brownian motion properties. It can detect the size distribution of particles in solution from 10 nm to 2 μm in diameter. The optimum particle concentration detected by NTA is ~107-109 particles/ ml. For better detection, the EX samples were diluted with sterile-filtered phosphate-buffered saline (PBS) to a concentration of 107-108 particles/ml. After diluting the sample, 700 μl of the same was loaded in the instrument for movement tracking at the rate of 30 frames/ second. The videos with particle movement were recorded at least 3 times per sample at different positions which were analyzed by the NTA software (version 3.5, Nanosight). The NTA results were produced as a mean of the 3 tests performed per sample and the particle concentration was calculated after considering the dilution factor.
EPC-EX labeling
To label the EPC-EXs, PKH26 or PKH67, lipophilic-membrane dyes exhibiting red or green fluorescence were used per previous publications [8, 23]. The isolated EXs were incubated with 2 μl of PKH26 or PKH67 (2 X10-6 M, Sigma-Aldrich) in 1 ml PBS for 5 minutes. To stop the reaction, 1ml 1% BSA was added and incubated for one minute. The suspension was then ultracentrifuged at 170,000 x g for 90 minutes to obtain the fluorescent-labeled EXs. The supernatant was discarded, and the pellet was resuspended in ASC medium for further co-incubation with the ASCs.
Co-incubation of EPC-EXs with ASCs
ASCs were subjected to HG plus H/R to induce injury as an in vitro model of ischemic stroke in diabetes. For inducing HG + H/R injury, ASCs (80% confluent) were cultured in complete medium with 25 mM glucose for 24 hours, and then placed in a hypoxia chamber (1% O2, 5% CO2, and 94% N2, Biospherixhypoxia chamber, NY, USA) for 6 hours [2, 8]. Following this, the ASCs were reoxygenated for 24 hours in a standard incubator (37°C and 5% CO2), during which the EPC-EXs or miR126-EPC-EXs (3 x 109 EX particles/ml) were added for co-incubation. The EPC-EXs or EPC-EXs-miR126 were resuspended in complete ASC medium and then co-incubated with the ASCs for 24 hours. Following this, the incorporation rate was measured by analyzing the fluorescent intensity of EPC-EXs (labeling with PKH) within the cells. Various assays were also performed to determine the function of EPC-EXs.
EPC-EX uptake mechanism
To determine the EPC-EX uptake mechanisms by ASCs, we focused on the endocytic uptake pathways, including macropinocytosis, clathrin and caveolin-dependent pathways. For this, the cells were pre-treated for 30 minutes with various inhibitors: 80 μM dynasore (dynamin inhibitor, Sigma-Aldrich), 5 μM LY290042 (macropinocytosis inhibitor, Enzo), 10 μM pitstop 2 (clathrin inhibitor, Abcam) or 200 μM genistein (caveolin inhibitor, EMD Millipore). After treatment, the cells were washed twice with PBS and then the PKH-labelled EPC-EXs were co-incubated with the ASCs for 24 hours. Fluorescent images were obtained by a fluorescence microscope (EVOS, NY) and fluorescent intensity was quantified by flow cytometry analysis (Accuri C6 flow cytometer).
PCR analysis of the miR-126 level
The levels of miR-126 in the EPCs and EPC-EXs were determined by Real-time PCR as we previously published [2, 23]. Briefly, the miRNA was extracted from the EPCs and EPC-EXs by using the TRIzol reagent and the RNA concentration was measured using NanoDrop 2000 Spectrophotometer (Thermo Fisher Scientific). cDNA was synthesized using PrimeScript RT reagent kit (Takara Bio Inc.) following the manufacturer’s instructions. qRT-PCR was carried out using miR-126 specific primers and SYBR Premix Ex Taq kit (Takara Bio Inc.) on a real-time PCR instrument (Bio-Rad). RNA U6 was used as an internal control. The RT primer: 5’- GTC GTA TCC AGT GCA GGG TCC GAG GTA TTC GCA CTG GATACG AC CGC ATT -3’. The primers of miR-126: 5’- AGG CGC TCG TAC CGT GAG TAA TA -3’ (forward); 5’- CCA GTG CAG GGT CCG AGG TA -3’ (reverse). The expression of U6 was used as an endogenous control for each sample. The primers of U6: 5’-CTCGCTTCGGCAGCACA-3’ (forward); 5’-AACGCTTCACGAATTTGCGT-3’ (reverse). The expression of miR-126 was normalized to U6 and calculated using 2−ΔΔCT method.
Cell apoptosis assay
The cellular apoptotic rate was determined by using Annexin V/ PI apoptosis kit (BD Biosciences). In brief, the cells were resuspended in 100 μl of Annexin V binding buffer and labeled with 10 μl of PI and 5 μl of FITC-Annexin V in the dark for 15 min at room temperature. The apoptotic cell was determined as Annexin +/PI – cells and the apoptotic percentage was analyzed using a flow cytometer (Accuri C6).
Intracellular reactive oxygen species (ROS) generation assay
Intracellular ROS generation, an effective method for determining oxidative stress in the cells was determined using dihydroethidium (DHE, Sigma-Aldrich) staining per our previous publications [24, 26]. DHE is a superoxide indicator which when oxidized primarily by superoxide resulting in 2-hydroxyethidium. The ASCs were cultured in a 6-well plate and incubated with 10 μM DHE solution (in dark) for 30 minutes at 37°C. The cells were then observed under a fluorescence microscope and the percentage of DHE-positive cells was analyzed using the flow cytometer (Accuri C6).
Cell cytotoxicity assay
Cellular cytotoxicity determination is carried out using LDH (lactate dehydrogenase, Fisher Scientific) cytotoxicity kit. ASCs were cultured in 96-well plates (in triplicate wells). After different treatments, ASCs were used for testing LDH activity. Absorbance was measured at 490 nm and 680 nm and calculations for the determination of percent cytotoxicity were carried out as per the manufacturer’s instructions.
Lipid peroxidation assay
Lipid peroxidation refers to the degradation of cellular lipids due to the generation of reactive oxygen species within the cell. For the determination of lipid peroxidation, a sensitive fluorescent reporter BODIPY 581/591 C11 reagent (BODIPY dye, Invitrogen) was used. The phenylbutadiene portion of the dye allows the shift of fluorescence emission peak from 590 nm-red to 510 nm-green upon oxidation. To determine the lipid peroxidation, after different treatments, ASCs cultured in 6-well plate were incubated with 10 μM BODIPY reagent for 30 minutes at 37°C. The ratio of reduction (590 nm)/oxidation (510 nm) was derived by reading the fluorescence intensities at the separate wavelengths on Cytation 5 plate reader (Biotek) while the percent lipid peroxidation was analyzed by the flow cytometer.
Statistical analysis
All data are presented as mean ± SD. Two group comparison was analyzed by student t-test. Multiple comparisons were analyzed by two-way ANOVA (SPSS version 16.0; SPSS, Chicago, IL, USA) followed by the Tukey test. For all tests, a P-value <0.05 was considered significant.