1. Wei, Y. L., Wang, G., Gao, Y. B., Liu, Z. G., Xu, L., Tian, M., Yuan, D. F., Ren, H. P., Z hou, H. C., Yang, L. A measurement system of high-temperature oxidation environment with ultrasonic Ir0.6Rth0.4alloy thermometry. Ultrasonics89, 102-109 (2018).
2. Shi, Y. Z., Yang, B., Liaw, P. K. Corrosion-resistant high-entropy alloys, A review. Metals7, 43 (2017).
3. Wang, Z., Wang, C., Zhao, Y. L., Hsu, Y. C., Li, C. L., Kai, J. J., Liu, C. T., Hsueh, C. H. High hardness and fatigue resistance of CoCrFeMnNi high entropy alloy films with
ultrahigh-density nanotwins. Int. J. Plast.131, 102726 (2020).
4. Yamabe-Mitarai, Y., Ro, Y., Harada, H., Maruko, T. Ir-base refractory superalloys for
ultra-high temperatures. Metall. Mater. Trans. A29, 537-549 (1998).
5. Choi, J. H., Park, K. W., Park, I. S., Nam, W. H., Sung, Y. E. Methanol electro-oxidation and direct methanol fuel cell using Pt/Rh and Pt/Ru/Rh alloy catalysts. Electrochim. Acta 50, 787-790 (2004).
6. Wang, H. S., Abruña, H. D. Rh and Rh alloy nanoparticles as highly active H2 oxidation catalysts for alkaline fuel cells. ACS Catal.9, 5057-5062 (2019).
7. Niu, J. L., Tang, Z. B., Huang, H., Pei, J., Zhang, H., Yuan, G. Y., Ding, W. J. Research on a Zn-Cu alloy as a biodegradable material for potential vascular stents application. Mater. Sci. Eng. C69, 407-413 (2016).
8. Li, P. J., Zhang, Y. G., Yang, X. G., Gao, Y. H., Ge, S. X. Alloyed PtNi counter electrodes for high-performance dye-sensitized solar cell applications. J. Alloys. Compd.725, 1272- 1281 (2017).
9. Hadef, F. Synthesis and disordering of B2 TM-Al (TM= Fe, Ni, Co) intermetallic alloys by high energy ball milling: A review. Powder Technol.311, 556-578 (2017).
10. Sharma, N., Jangra, K. K., Raj, T. Fabrication of NiTi alloy: A review. Proc. Inst. Mech. Eng. L232, 250-269 (2018).
11. Miikkulainen, V., Leskelä, M., Ritala, M., Puurunen, R. L. Crystallinity of inorganic films grown by atomic layer deposition: overview and general trends. J. Appl. Phys.113, 2 (2013).
12. Knez, M., Nielsch, K., Niinistö, L. Synthesis and surface engineering of complex nanostructures by atomic layer deposition. Adv. Mater.19, 3425-3438 (2007).
13. Ahn, J., Ahn, C., Jeon, S., Park, J. Atomic layer deposition of inorganic thin films on 3D polymer nanonetworks. Appl. Sci.9, 1990 (2019).
14. Schwille, M. C., Schössler, T., Barth, J., Knaut, M., Schön, F., Höchst, A., Oettel, M., Bartha, J. W. Experimental and simulation approach for process optimization of atomic layer deposited thin films in high aspect ratio 3D structures. J. Vac. Sci. Technol. A35, 01B118 (2017).
15. Wang, C. G., Ping, W. W., Bai, Q., Cui, H. C., Hensleigh, R., Wang, R. L., Brozena, A. H., Xu, Z. P., Dai, J. Q., Pei, Y. A general method to synthesize and sinter bulk ceramics in seconds. Science368, 521-526 (2020).
16. Yao, Y., Huang, Z., Xie, P., Lacey, S. D., Jacob, R. J., Xie, H., Chen, F., Nie, A., Pu, T., Rehwoldt, M. Carbothermal shock synthesis of high-entropy-alloy nanoparticles. Science 359, 1489-1494 (2018).
17. Shibata, T., Bunker, B. A., Zhang, Z. Y., Meisel, D., Vardeman, C. F., Gezelter, J. D. Size-dependent spontaneous alloying of Au−Ag nanoparticles. J. Am. Chem. Soc.124, 11989-11996 (2002).
18. Guisbiers, G., Abudukelimu, G., Hourlier, D. Size-dependent catalytic and melting properties of platinum-palladium nanoparticles. Nanoscale Res. Lett.6, 1-5 (2011).
19. Zou, Y. M., Cheng, C. Y., Guo, Y. Y., Ong, J. A., Goei, R., Li, S. Z., Tok, A. L. Y. Atomic layer deposition of palladium and rhodium thin film using low-concentration ozone. RSC Adv.11, 22773-22779 (2021).
20. Luong, D. X., Bets, K. V., Algozeeb, W. A., Stanford, M. G., Kittrell, C., Chen, W. Y., Salvatierra, R. V., Ren, M. Q., McHugh, E. A., Advincula, P. A. Gram-scale bottom-up flash graphene synthesis. Nature577, 647-651 (2020).
21. Plimpton, S. Fast parallel algorithms for short-range molecular dynamics. J. Comput. Phys.117, 1-19 (1995).
22. Plimpton, S. J., Thompson, A. P. Computational aspects of many-body potentials. MRS Bull.37, 513-521 (2012).
23. Sheng, H. W., Kramer, M. J., Cadien, A., Fujita, T., Chen, M. W. Highly optimized embedded-atom-method potentials for fourteen fcc metals. Phys. Rev. B83, 134118 (2011).
24. Daw, M. S., Baskes, M. I. Embedded-atom method: derivation and application to impurities, surfaces, and other defects in metals. Phys. Rev. B29, 6443 (1984).
25. Evans, D. J., Holian, B. L. The nose–hoover thermostat. J. Chem. Phys.83, 4069-4074 (1985).
26. Zhou, Y. Q., Karplus, M., Ball, K. D., Berry, R. S. The distance fluctuation criterion for melting: comparison of square-well and morse potential models for clusters and homopolymers. J. Chem. Phys.116, 2323-2329 (2002).
27. Yao, X. Z., Wei, Y. P., Wang, Z. X., Gan, L. Revealing the role of surface composition on the particle mobility and coalescence of carbon-supported Pt alloy fuel cell catalysts by in situ heating (S) TEM. ACS Catal.10, 7381-7388 (2020).
28. Yang, Y., Yao, Y. G., Kline, D. J., Li, T. Y., Ghildiyal, P., Wang, H. Y., Hu, L. B., Zachariah, M. R. Rapid laser pulse synthesis of supported metal nanoclusters with kinetically tunable size and surface density for electrocatalytic hydrogen evolution. ACS Appl. Nano. Mater.3, 2959-2968 (2020).
29. Drouin, D., Couture, A. R., Joly, D., Tastet, X., Aimez, V., Gauvin, R. CASINO V2. 42 —a fast and easy‐to‐use modeling tool for scanning electron microscopy and microanalysis users. Scanning29, 92-101 (2007).
30. Bharadwaj, S. R., Tripathi, S. N., Chandrasekharaiah, M. S. The Ir-Pt (iridium-platinum) system. J. Phase Equilib.16, 460-464 (1995).
31. Guo, H. Y., Fang, Z. W., Li, H., Fernandez, D., Henkelman, G., Humphrey, S. M., Yu, G. H. Rational design of rhodium–iridium alloy nanoparticles as highly active catalysts for acidic oxygen evolution. ACS Nano13, 13225-13234 (2019).
32. Le Drogoff, B., El Khakani, M. A., Silva, P. R. M., Chaker, M., Ross, G. G. Surface properties of pulsed laser deposited Ir, Rh, and Ir0. 9Rh0.1 thin films for use as microelectrode arrays in electroanalytical heavy metal trace sensors. Appl. Surf. Sci.152, 77-84 (1999).
33. Kiran, V., Ravikumar, T., Kalyanasundaram, N. T., Krishnamurty, S., Shukla, A. K., Sampath, S. Electro-oxidation of borohydride on rhodium, iridium, and rhodium–iridium bimetallic nanoparticles with implications to direct borohydride fuel cells. J. Electrochem. Soc.157, B1201 (2010).
34. Silva, J. C. M., Assumpção, M. H. M. T., Hammer, P., Neto, A. O., Spinacé, E. V., Baranova, E. A. Iridium− rhodium nanoparticles for ammonia oxidation: electrochemical and fuel cell studies. ChemElectroChem4, 1101-1107 (2017).
35. Brandes, E. A., Brook, G. B. Smithells Metals Reference Book, (Butterworth, 1983).
36. Mottet, C., Rossi, G., Baletto, F., Ferrando, R. Single impurity effect on the melting of nanoclusters. Phys. Rev. Lett.95, 035501 (2005).
37. Lyalin, A., Hussien, A., Solov’yov, A. V., Greiner, W. Impurity effect on the melting of nickel clusters as seen via molecular dynamics simulations. Phys. Rev. B79, 165403 (2009).
38. Thompson, M. O., Galvin, G. J., Mayer, J. W., Peercy, P. S., Poate, J. M., Jacobson, D. C., Cullis, A. G., Chew, N. G. Melting temperature and explosive crystallization of amorphous silicon during pulsed laser irradiation. Phys. Rev. Lett.52, 2360 (1984).
39. Tan, K. W., Jung, B., Werner, J. G., Rhoades, E. R., Thompson, M. O., Wiesner, U. Transient laser heating induced hierarchical porous structures from block copolymer– directed self-assembly. Science349, 54-58 (2015).