1 U. Syafiq, N. Ataollahi and P. Scardi, Progress in CZTS as hole transport layer in perovskite solar cell, Sol. Energy, 2020, 196, 399–408
2 M.A. Green, E.D. Dunlop, J. Hohl-Ebinger, M. Yoshita, N. Kopidakis, A.W. Ho-Baillie, Solar cell efficiency tables (Version 55), Progress in Photovoltaics: Research and Applications 28(NREL/JA-5900-75827) (2019).
3 T. Ratz, G. Brammertz, R. Caballero, M. León, S. Canulescu, J. Schou, L. Gütay, D. Pareek, T. Taskesen, D. Kim, Physical routes for the synthesis of kesterite, Journal of Physics: Energy 1 (4) (2019) 042003.
4 W. Wang, M. T. Winkler, O. Gunawan, T. Gokmen, T. K. Todorov, Y. Zhu and D. B. Mitzi, Device characteristics of CZTSSe thin-film solar cells with 12.6% efficiency, Adv. Energy Mater., 2014, 4, 1–5
5 W. Ki and H. W. Hillhouse, Earth-abundant element photovoltaics directly from soluble precursors with high yield using a non-toxic solvent, Adv. Energy Mater., 2011, 1, 732–735
6 M. Kumar, A. Dubey, N. Adhikari, S. Venkatesan and Q. Qiao, Strategic review of secondary phases, defects and defect-complexes in kesterite CZTS-Se solar cells, Energy Environ. Sci., 2015, 8, 3134–3159
7 L.E. Valle Rios, K. Neldner, G. Gurieva, S. Schorr Existence of off-stoichiometric single phase kesterite J Alloy Compd, 657 (2016), pp. 408-413
8 P. Prabeesh, K.V. Vysakh, I.P. Selvam, S.N. Pott Cu2ZnSnS4 Thin Films by Dip Coating from Metal-Thiourea Precursor Solution: effect of Sulphurization Temperature on the Formation and Structural, Optical and Electrical Properties Journal of Electronic Materials, 47 (9) (2018), pp. 5396-5402
9 M. Suryawanshi, S.W. Shin, U. Ghorpade, K. Gurav, C. Hong, P. Patil, A. Moholkar, J.H. Kim Improved solar cell performance of Cu2ZnSnS4 (CZTS) thin films prepared by sulfurizing stacked precursor thin films via SILAR method J Alloy Compd, 671 (2016), pp. 509-516
10 H.T. Kim, D. Kim, C. Park Temperature Effects on Cu2ZnSnS4(CZTS) Films Deposited by Spraying Method Molecular Crystals and Liquid Crystals, 564 (1) (2012), pp. 155-161
11 A. Redinger, M. Mousel, R. Djemour, L. Gütay, N. Valle, S. Siebentritt Cu2ZnSnSe4 thin film solar cells produced via co-evaporation and annealing including a SnSe2capping layer Progress in Photovoltaics: Research and Applications, 22 (1) (2014), pp. 51-57
12 A. V.Moholkar, S. S. Shinde, A. R. Babar, Kyu-Ung Sim, Ye-bin Kwon, K. Y. Rajpure, P. S. Patil, C. H. Bhosale, and J. H. Kim. "Development of CZTS thin films solar cells by pulsed laser deposition: influence of pulse repetition rate." Solar Energy 85, no. 7 (2011): 1354-1363.
13 U.Shafi, U. Hanif,B.Feriel, M. Miguel, and M. Bernabé. "Synthesis of in-gap band CuGaS2: Cr absorbers and numerical assessment of their performance in solar cells." Solar Energy Materials and Solar Cells 180 (2018): 322-327.
14 B. Amal, H. Bouchaib, U. Shafi, U. Hanif, E. T. Mohamed D. M. F. Santos, and M. Bernabé. "Experimental, theoretical, and numerical simulation of the performance of CuInxGa(1-x) S2-based solar cells." Optik 183 (2019): 137-147.
15 U.Shafi, M. Miguel, and M. Bernabé. "Electrodeposition of CuGaSe2 and CuGaS2 thin films for photovoltaic applications." Journal of Solid-State Electrochemistry 20, no. 8 (2016): 2251-2257.
16 B. Amal, U. Shafi,U. Hanif, M. Miguel, M. Bernabé, and E. T. Mohamed. "Electrodeposited CdZnS/CdS/CIGS/Mo: characterization and solar cell performance." JOM 72, no.2 (2020): 615-620.
17 M.I. Khalil, O.Atici, A. Lucotti et al (2016) CZTS absorber layer for thin film solar cells from electrodeposited metallic stacked precursors (Zn/Cu-Sn). Appl Surf Sci 379:91–97
18 U.Shafi, B. Amal, U. Hanif,M.Bernabé, and M. Miguel. "Enhanced optical and structural properties of V-doped binary SnS2 buffer layer." Solar Energy 204 (2020): 654-659.
19 B. Amal, H. Bouchaib,U.Shafi, U. Hanif, E. T. Mohamed, D. M. F. Santos, and Bernabe Mari. "Optoelectronic characterization of CuInGa (S)2 thin films grown by spray pyrolysis for photovoltaic application." Applied Physics A 125, no. 8 (2019): 1-9.
20 U.Shafi, B. Amal, U. Hanif, M.Bernabé, and M. Miguel. "Comparative study of binary cadmium sulfide (CdS) and tin disulfide (SnS2) thin buffer layers." Solar Energy 208 (2020): 637-642.
21 S.J. Park, W.H. Kim, W. J. Maeng, Y. S. Yang, C. G. Park, Hyungjun Kim, Kook-Nyung Lee, Suk-Won Jung, and W. K. Seong. "Effect oxygen exposure on the quality of atomic layer deposition of ruthenium from bis (cyclopentadienyl) ruthenium and oxygen." Thin Solid Films 516, no. 21 (2008): 7345-7349.
22 Ghebouli, M. A., Ghebouli, B., Larbi, R., Chihi, T., &Fatmi, M. (2021). Effect of buffer nature, absorber layer thickness and temperature on the performance of CISSe based solar cells, using SCAPS-1D simulation program. Optik, 241, 166203.
23 Houshmand, M., Esmaili, H., Zandi, M. H., &Gorji, N. E. (2015). Degradation and device physics modeling of TiO2/CZTS ultrathin film photovoltaics. Materials Letters, 157, 123-126.